UK - ASSEMBLY AND INSTRUCTIONS MANUAL ASSEMBLY AND INSTRUCTION MANUAL SCAN 5003 FR/FL

CONGRATULATIONS ON YOUR NEW SCAN BUILT-IN STOVE You have purchased a product by one of Europe’s leading manufacturers of woodburning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions. Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.

9 Cutout in the surround material 9 Closed combustion system 9 Clips for Norway (Large rooms) 10 Mounting of the heat shields/convection covers 10 Mounting of convection grate CONTENTS■ TECHNICAL DATA Installation 4 Dimension sketch and minimum distances Safety 4 Type plate Technical data and dimensions 5 Product registration number Additional accessories Disposal of packaging Load-bearing foundation Floor plate Existing chimney and pre-fabricated element chimney Connection between built-in stove and steel chimney Requirements for chimney Balanced flue Trim Internal installation in non-flammable...

TECHNICAL DATA INSTALLATION ¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building regulations as well as the information provided in this Assembly and Instructions Manual ¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning ¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter....

Steel plate Cast iron Galvanised sheet Chamotte TECHNICAL DATA AND DIMENSIONS Materials Surface treatment Weight Scan 5003 FR/FL Weight Scan 5003 FR/FL w/heat shield Flue conn. piece internal diameter Flue conn. piece external diameter Approval type * Intermittent operation in this context means normal use of a built-in stove. In other words, you should let the fire die down until only the embers are left before refuelling. This built-in stove is produced in accordance with type approval for the product, which also covers the product's Assembly and Instruction Manual. The Declaration of Performance...

Weight: N/A Area: N/A Folder\Designs\Scan 5003\95003001.idw All distances are in mm. All distances are minimum distances * Connection of fresh-air intake - inside measure: Ø 103 mm - outside measure: Ø120 mm ** Min. distance to furniture/flammable material *** Height to the beginning of flue connecting piece at top/rear outlet, flue conn. piece - inside measure: Ø132 mm - outside measure: Ø149 mm Flammable material number: Drawing sr number: Målskitse, FR, varmeskjold til brandmur *Note: Refer to the manual for distance *Note: Referto tocombustible the manual floor. for distance to combustible...

Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick or other material with corresponding fireproof and insulating abilities Insulated length Upper convection opening EMNE: Scan 5003 Scan A/S MATERIALE:DK-5492 Vissenbjerg© NAVN: Brandmur F.eks. 50 mm Jøtul firewall, 110 mm mursten eller andet materiale med tilsvarende brandfasthed og isolationsevne. Min. 500 cm2 Brandbart materiale All distances are in mm. All distances are minimum distances These distances apply for an insulated flue pipe all the way down to the stove * Distance to glass ** Distance to flammable floor Cavities are not to be filled...

TYPE PLATE All Scan built-in stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The type plate is placed loose in the fireplace. Type plate Scan 5003 FR/FL PRODUCT REGISTRATION NUMBER All Scan built-in stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. Product registration number Scan 5003 FR/FL

■ Fresh air box (see page 12) ■ Connection pipe 0 100 mm ■ Heat-storage stones (see page 13) ■ Heat shields/convection covers (see page 14) ■ Frames (see page 18) ■ Convection air grid (see page 21) Your Scan built-in stove may come supplied with the following packaging: All items in our product range come under the category of lightweight fireplaces and stoves and do not normally require any reinforcement of the beam structure. They can be positioned on ordinary beams/floor. You should of course make sure that the foundation on which the stove is positioned can indeed support the weight of the...

REQUIREMENTS FOR CHIMNEY The chimney must have a minimum internal diameter of 148 mm and have a T400 designation, with G for the soot fire test. The length should be min. 5 metres. If you opt to connect the built-in stove with an elbow pipe, you should use a curved elbow, as this gives a better draught. If you connect the stove with a sharp elbow pipe, the cleansing lid must be placed in the vertical part so that the horizontal part can be cleaned through here. If the chimney is fitted with a smoke extractor, it must be possible to adjust it to a suitable draft. The requirements to the chimney...

CUTOUT IN THE SURROUND MATERIAL If you want to build in the insert so that the surround is flush with the insert's door, it may be necessary - according to the thickness of the material - to make a cut in the material to allow space for the box on the front. TG.NR: DATO: Udskæring i firewall for kasse TG.NR: DATO: Scan A/S DK-5492 Vissenbjerg© NAVN: Udskæring i firewall for kasse VÆGT: N/A TG.NR: DATO:

FRESH AIR INTAKE In a well-insulated house the air used for the combustion process has to be replaced. This particularly applies to houses with mechanical ventilation. There are different ways of making sure that air is exchanged. The most important thing is to ensure that there is a supply of air to the room where the built-in stove is located. The external wall vent must be located as close to the stove as possible, and you must be able to close it when you are not using the stove. National and local building regulations must be followed with regard to connection of a fresh air intake. The...