EU - ASSEMBLY AND INSTRUCTIONS MANUAL ASSEMBLY AND INSTRUCTION MANUAL SCAN 1006-B

CONGRATULATIONS ON YOUR NEW SCAN WOOD-BURNING STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions. Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.

4 Dimension sketch and minimum distances Technical data and dimensions Tools needed for mounting of the stove Loose parts Disposal of packaging Additional accessories Load-bearing foundation Floor plate Existing chimney and pre-fabricated element chimney Connection between stove and steel chimney Storage of flammable material Carrying capacity Safety distance CB-technology (Clean Burn) Baffle plate Environmentally friendly operation Lighting Continuous operation Warning about over-firing Using the stove in various weather conditions 9 Fitting the flue connection piece 10 Closed combustion system...

TECHNICAL DATA INSTALLATION o ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter. Your Scan T Dealer will be able to recommend a qualified fitter in your area. For information on Scan Dealers, please go to www.scan-stoves.com. ¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building regulations as well as the information provided in this Assembly and Instruction Manual ¬ When you install any kind of fireplace or stove, you must inform the local building and housing...

Steel plate Galvanised sheet Ceramic stone/vermiculite Chamotte Robax glass Surface treatment Max. wood length Scan 1006-B Weight Scan 1006-B (Ceramic stone) ca. 163 kg * Intermittent operation in this context means normal use of a wood-burning stove. In other words, you should let the fire die down until only the embers are left before refuelling. Scan 1006-B is produced in accordance with type approval for the product, which also covers the product's Assembly and Instruction Manual. The Declaration of Performance (DoP) is available from www.scan.dk Weight Scan 1006-B (Vermiculite) Connecting...

Målskitseto - væghængt til brændbart) X /EMNE: Y according national(afstand laws and regulations Radiation zone Målskitse - væghængt (afstand til brændbart) MATERIALE: Scan Combustibile floor Floor plate 91006005 DATO: 17-06-2020 SIGN: NAVN: Scan 1003-B Målskitse Scan 1006-B med sokkel Scan 1006-B with plinth Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick or other material with corresponding fireproof and insulating abilities Flammable material All distances are in mm. All distances are minimum distances * Connection of fresh-air intake Ø 100 mm ** Min. distance to furniture/flammable material...

Afstand til brændbar væg beskyttet af brandmur Minimum distance to flammable wall protected by a fire wall All distances are in mm. All distances are minimum distances * Half-insulated chimney (The requirements to the chimney and the flue pipe in terms of safety distances must be met) 0 Afstand til brændbart materiale, vist med uisoleret røgrør Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick MATERIALE: or other material with corresponding fireproof and AREAL: DIMENSION: insulating abilities Flammable material Minimum distance to flammable materials

TYPE PLATE All Scan wood burning stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The type plate (Vermiculite) is placed loose in the fireplace. It must be placed in a visible place on the stove. The eco energy label and type plate (Ceramic stone) are in the box with the ceramic stones and must replace the existing labels. Type plate Scan 1006-B (Ceramic stone) Type plate Scan 1006-B (Vermiculite) PRODUCT REGISTRATIONUMBER All Scan wood burning stoves are provided with a product registration number. Please make a note of this number...

■ Spirit level ■ Cross tip screwdriver ■ Flat head screwdriver ■ 010 mm wall drill ■ Screws for connecting piece 5 x 12 mm ■ Screws for connecting piece/fresh air 4,2 x 6,5 mm ■ Screw M5x6 (Only used in Norway) ■ Burn chamber plates (side and rear) ■ Bricks for the bottom of the burn chamber ■ Gasket for connecting piece ■ Connecting piece for fresh air inlet ■ Decor ring for top outlet Your Scan stove may come supplied with the following packaging:

ADDITIONAL ACCESSORIES ¬ Large module ¬ Large/small side module ¬ Large/small plinth for side module ¬ Large/small wall bracket ¬ Cover for fresh air inlet ¬ Small floor plate (glass or steel) ¬ Large floor plate (glass or steel) Small wall bracket Large wall bracket Large side module vægbeslag løse with fresh air inlet and heat 91010034 shield Small side module

LOAD-BEARING FOUNDATION All items in our product range come under the category of lightweight fireplaces and stoves and do not normally require any reinforcement of the beam structure. They can be positioned on ordinary beams/floor. You should of course make sure that the foundation on which the stove is positioned can indeed support the weight of the stove and, where applicable, a steel chimney, if you have opted for this solution. In case of doubt about the carrying capacity of the floor, please consult a building expert. FLOOR PLATE If you are placing the stove on a flammable floor, you must...

STORAGE OF FLAMMABLE MATERIAL ATTENTION!! It is important to use the delivered magnets as distance pieces between the modules when using these in connection with flammable materials. You can store wood under the stove in the module with heat shield and fresh air inlet CARRYING CAPACITY EMNE: assembly

SAFETY DISTANCE European, national and local regulations concerning safety distances for wood-burning stoves and flue pipes must be complied with. If you connect the stove to a steel chimney, the safety distances of the steel chimney must also be respected. DISTANCE TO FURNITURE Distance to furniture from glass: 1500 mm. You should however assess whether furniture or other items might become excessively dry due to being too close to the stove. The wood-burning stove must be set up so that the stove itself, the flue pipe, and the chimney can all be cleaned. Målskitse Scan 1003-B VÆGT: N/A TG.NR:...