EU - ASSEMBLY AND INSTRUCTIONS MANUAL SCAN ASSEMBLY AND INSTRUCTION MANUAL SCAN 1003/1004

CONGRATULATIONS ON YOUR NEW SCAN BUILT-IN STOVE You have purchased a product by one of Europe’s leading manufacturers of wood-burning stoves, and we are sure that you will have years of pleasure from your purchase. To make the best possible use of your stove, it is important that you follow our advice and instructions. Read through this Assembly and Instruction Manual carefully before you start to assemble your stove.

Technical data and dimensions 5 Dimension sketch Scan 1003 6 Dimension sketch Scan 1004 7 Tools needed for mounting of the insert Loose parts Additional accessories Load-bearing foundation Floor plate Existing chimney and pre-fabricated element chimney Connection between built-in stove and steel chimney Internal installation in non-flammable material Distance to furniture Safety distance Building into flammable material with fire wall CB-technology (Clean Burn) Baffle plate 10 Fitting the flue connection piece 10 Closed combustion system 11 Mounting of external air supply 11 Fitting without the...

TECHNICAL DATA INSTALLATION ¬ The house owner is responsible for ensuring that installation and assembly are in accordance with national and local building regulations as well as the information provided in this Assembly and Instructions Manual ¬ When you install any kind of fireplace or stove, you must inform the local building and housing authorities. In addition you are obliged to have the installation inspected and approved by a local chimney sweep prior to commissioning ¬ To ensure best-possible functionality and safety for your installation, we advise you to call a professional fitter....

Steel plate Galvanised sheet Ceramic stone/vermiculite Chamotte Robax glass Surface treatment Max. wood length Scan 1003 Max. wood length Scan 1004 * Intermittent operation in this context means normal use of a wood-burning stove. In other words, you should let the fire die down until only the embers are left before refuelling. Scan 1003-1004 is produced in accordance with type approval for the product, which also covers the product's Assembly and Instruction Manual. The Declaration of Performance (DoP) is available from www.scan-stoves.com Weight Scan 1003 (Ceramic stone) ca. 124 kg Weight Scan...

DIMENSION SKETCH SCAN 1003 Rear outlet Centre external air supply, rear side Centre of external air supply, bottom

DIMENSION SKETCH SCAN 1004 A Top outlet B Rear outlet C Centre external air supply, rear side D Centre of external air supply, bottom

TYPE PLATE All Scan built-in stoves are fitted with a type plate that specifies the approval standards and the distance to flammable materials. The type plate (Vermiculite) is located on top of the stove. The type plate (Ceramic stone) is in the box with the ceramic stones and must be stuck on top of the existing type plate. Type plate Scan 1003 (Ceramic stone) Type plate Scan 1003 (Vermiculite)

TYPE PLATE Type plate Scan 1004 (Ceramic stone) Type plate Scan 1004 (Vermiculite) PRODUCT REGISTRATIONUMBER All Scan built-in stoves are provided with a product registration number. Please make a note of this number at the rear page of this manual; you will always need to quote it when contacting your dealer or Scan A/S. Product registration number Type plate Product registration number

■ Spirit level ■ Cutting nippers ■ Cross tip screwdriver ■ Flat head screwdriver ■ 010 wall drill ■ Open-end spanner The trim is packed separately. In the insert's combustion chamber you will find the following loose parts: 8 x 3 mm black self-adhesive gasket (2 m) (0100 mm sleeve, connecting piece and cassette) 4 x torx screws M6 x 50 (for fastening the cassette) 2 x screws M5x6 mm (Only used in Norway) ■ Burn chamber plates (side and rear) ■ Bricks for the bottom of the burn chamber ■ Bag containing loose parts: 4 x self-tapping screws 4.2 x 6.5 mm (for fastening the sleeve 0100 mm) 4 x rawlplugslO...

FLOOR PLATE If you are placing the stove on a flammable floor, you must comply with the national and local regulations on the size of any non-flammable subsurface required to cover the floor around the stove. Your local Scan dealer can advise you on regulations concerning protection of flammable materials in the vicinity of your stove. The floor plate’s function is to protect the floor and flammable material against any sparks that may occur. CONVECTION AIR (BY BUILDING INTO FLAMMABLE MATERIAL WITH FIRE WALL) The covering must contain holes for convection air. Convection means that there is an...

TRIMS AND DOORS Trims and doors are fitted when the surfaces of the surround have been treated. GASKET Gasket 0,75 m is mounted on the inside of the cassette as shown. DISTANCE TO FURNITURE Distance to furniture from glass: 1500 mm. You should however assess whether furniture or other items might become excessively dry due to being too close to the stove. The stove is NOT to be built into flammable materials without the use of a fire wall! SAFETY DISTANCE European, national and local regulations concerning safety distances for wood-burning stoves and flue pipes must be complied with. Krog Iversen...

BUILDING INTO FLAMMABLE MATERIAL WITH FIRE WALL Installation with an un-insulated elbow pipe Flammable material Fire wall, e.g. 50 mm Jøtul Firewall, 110 mm brick or other material with corresponding fireproof and insulating abilities Flammable materials Chimney All distances are in mm. All distances are minimum distances 91005029 * Applies for allTG.NR: installations DATO: Krog Iversen & Co A/S DK-5492 Vissenbjerg© Floor plate These cover plates must be removed when installing into flammable material protected by insulation Ceiling Lille glasgulvplade convection opening MATERIALE: DIMENSION:...

BUILDING INTO FLAMMABLE MATERIAL WITH FIRE WALL Installation with an insulated, vertical flue pipe - structure/surround to ceiling Cavities are not to be filled out with insulation material! (Ceramic stone) (Vermiculite) Upper convection opening Isoleret røgrør Lower convection opening Krog Iversen & Co A/S DK-5492 Vissenbjerg© Tighten the space, for example with a glass-gasket The distance to fire wall (brick) depends on the use of an insulated flue pipe all the way down to the insert NAVN: Konstruktion/omramning mod loft VÆGT: N/A Møbleringsafstand: 800 mm. Flammable materiale material Brandbart...