A perfectly secured trench in 3 steps: After excavating the trench to full depth, the Fin-ply panels are placed against the trench walls. The Quick Shore frame is then centred on a panel at the edge of the trench and the frame opened. This can be done by one person. By means of the release tool, the user can then expand the frame at arm’s reach to the opposite side of the trench. Finally the struts are expanded hydraulically to the required length by means of a pump, so that the rails provide close support to the panels. QUICK SHORE Series 260 Ready! At no time there is need for the employee to enter the unsecured trench and thus risk an accident from collapsing trench walls. The application of the Quick Shore demands a stable ground. Quick Easy-to-handle

quick shore Series 260 Trench safety without excavator The Quick Shore is a new lightweight trench support system for depths up to 2.00 metres. This system is ideally suited for laying and repairing house service connections; including gas and water pipes. In addition to use by building companies, this handy system will benefit gardening and landscaping contractors as well as local authority contractors. Simple, easy-to-handle, compact The Quick Shore aluminium corner posts are available in two different sizes; 1,50 m and 2,10 m. The strutting is effected by infinitely adjustable hydraulic struts,...