Also when using the SBH Rolling strut shoring system with shoring plates, very often utility lines must be crossed. For this purpose, pile chamber plates with lateral slide rail guidances are designed. Since the constructional design of the plate body is identical to those of the pile chamber plates, a system change is not necessary. Crossing lines are easily handled by the combination of the two systems. Customised solutions PILE CHAMBER SHORING Series 400 Installation in rolling strut shoring in the outer guides with beam in the inner guides without beam Strong Compatible

PILE CHAMBER SHORING Series 400 L The pile chamber is produced for the trench sheet type KD 6/8. Larger trench depths require additional supports. The SBH Design Calculation Department offers professional advice and on request a design calculation especially for your site is provided. The application is very easy also in narrow site conditions: The excavator is located in front of the trench and lowers the trench sheets following the excavation with the excavator bucket. Alternatively the lowering can take place by means of ramming equipment. Pile chamber plates can be combined with any other...