1. Catalogs
  2. Sattler AG
  3. Sattler Broschure 2018
video corpo

Sattler Broschure 2018

Sattler Broschure 2018

Product catalog summary
Introduction
This document provides important consumer information regarding the performance and limitations of blind cloths, which are high-performance products produced with environmental considerations. Despite advanced production techniques, certain effects may occur that do not affect the product's value or usability.

Product Specifications and Limitations
  • Crease Marks: These may appear as dark streaks when light passes through, especially in light-colored materials, due to the making-up and folding process.
  • Waviness: This can occur along side hems, seams, and panel centers due to double-layered seams, tension from awning arms, and sagging of the roller shaft or front bar. Heavy rainfall can exacerbate this effect.
  • Rain Resistance: Standard acrylic awnings are not designed for rain protection. The water-repellent TeXgard EASY CLEAN finish can repel short and light rain, but prolonged heavy rain may penetrate the fabric.

Care Instructions
  • Keep the awning tensioned with an active spring system to manage stress on seams and hems.
  • Avoid rolling or folding the awning while wet.
  • Regularly remove loose dirt and clean with a mild soapy water solution.
  • Do not use high-pressure cleaners.

Conclusion
The document highlights that these characteristics are based on guidelines from the ITRS (German Association for Technical Textiles, Roll-Shutters, and Sun Protection) and represent only a portion of the guidelines.
See more

Catalog excerpts

Sattler Broschure 2018-1

Product properties of awning fabrics Perfection with boundaries Blind cloths are high performance pro- which may occur in spite of highly so- ducts. However, given the present state phisticated production and processing techniques. Such effects do no alter ments of environmental protection, they the value and usability of the product in can only be produced to a limited de- any way. In order to avoid irritation and gree of perfection. Therefore, the pro- in the context of consumer information, ducer can be confronted with customer we should like to draw your attention to complaints regarding certain effects these properties. Crease Marks Crease marks originate during the making-up and folding of the awning. These may result in the crease appearing as a dark streak when the light source is behind the cover, especially where light-coloured materials are concerned. Waviness around seams and on panels Waviness may occur along the side hems, around the seams and in the centre of the panels. The material is arranged in a double layer at the seams, resulting in unequal diameters when wound on the roller. The tension caused by the awning arms and sagging of the roller shaft and/or the front bar may increase these effects. Waviness may also occur if large amounts of water are allowed to gather on the awning during periods of heavy rainfall. Side panel elongation The awning is usually kept tensioned almost permanently with the help of an active spring system. Seams and hems act as a reinforcement but are also subject to the highest levels of stress. If the awning is rolled in, the seams and hems come to lie on top of each other, thus further increasing both pressure and tension. Seams and hems are pressed flat and therefore increase in length. This may cause the side hems to sag slightly when extending the awning. rain resistance Please note that standard acrylic awnings are not designed to protect from rain. Our water repellent TEXgard EASY CLEAN finish helps repell short and light rain. But long and heavy rain may cause water to penetrate the fabric. Always follow the care instructions: Never clean with high-pressure cleaners. Remove loose dirt regularly. Never roll up or fold whilst wet. Clean with a mild soapy water solution. The examples shown are based on the guidelines of the ITRS (German Association for technical textiles, roll-shutters and sun protection) and only represent an excerpt of them. Important consumer information

 Open the catalog to page 1

All Sattler AG catalogs and technical brochures

  1. Nautex PVC

    2  Pages

  2. Nautex Acryl

    2  Pages

  3. Twilight

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.