MAESTRO PROGRAMME CHART TION TEMP DESCRIPTION COLOUR OXIDATION TONE ON TONE COLOUR LIGHTENING STREAKING TREATMENTS PERM. NORMAL HAIR PERM. DELICATE HAIR SLOW DRY NORMAL DRY SUPPLY VOLTAGE FREQUENCY MAX ABSORBED CURRENT INSULATION CATEGORY www.sathair.com [email protected]

ATTENTION: IT TAKES TWO PERSONS TO ASSEMBLE THE WALL ARM. PER L’INSTALLAZIONE SERVONO 2 PERSONE Walling of the metal stirrup: respecting the same measures quoted on drawing, set metal stirrup perfectly perpendicular the floor and pay attention that its frontal part doesn’t jut out of the wall. When the stirrup is walled up, join the wall arm fixing its plate with nuts and washers (pict. 1) and squeeze with a key starting from the upper bolt. Then add the Maestro (pict. 4): keeping pulled the dice-box “A”, fit part “C” in “B” and insert the key “D” in its own place. Let the dicebox “A” descend,...

WARNINGS CONNECTION AND MAINTENANCE: ALWAYS CONNECT THE APPLIANCE TO AN ELECTRICAL INSTALLATION WHICH COMPLIES WITH CURRENT NATIONAL LEGISLATION. CHECK THAT THE ELECTRIC SOCKET IS EARTHED AND SUITABLE FOR THE VOLTAGE AND POWER OF THE APPLIANCE (SEE DATA PLATE). ALWAYS DISCONNECT THE APPLIANCE FROM THE ELECTRIC SOCKET BEFORE CLEANING. ALWAYS WAIT FOR IT TO BE COMPLETELY COLD. DO NOT USE STRONG DETERGENTS OR ANY SOLVENTS TO CLEAN THE APPLIANCE. ENSURE THAT THE APPLIANCE IS COMPLETELY DRY BEFORE CONNECTING IT TO THE ELECTRIC SOCKET. KEEP IT CLEAN AND REMOVE ANY FOREIGN BODIES FROM THE AIR INLET...

INSTRUCTIONS FOR USE CONNECT THE APPLIANCE TO THE ELECTRICAL SUPPLY (SEE WARNINGS). PRESS THE MAIN SWITCH ON THE LOWER PART OPPOSITE THE KEYPAD. ALL THE LEDS WILL LIGHT UP BRIEFLY. THE REMOTE CONTROL WILL BEEP AND THE DISPLAY WILL SHOW A LIGHT. IF THE APPLIANCE HAS BEEN TURNED OFF DURING USE OR THERE HAS BEEN A POWER FAILURE, THE SPIDER WILL BE OUT OF POSITION. THIS WILL AUTOMATICALLY BE MOVED TO A REST POSITION. DO NOT FORCE OR STOP THE MOVEMENT OF THE SPIDER WHILST IT IS REALIGNING. ONCE IT HAS RETURNED TO THE END POSITION, THE CONTROL WILL BEEP AND PREPARE TO RECEIVE COMMANDS. main switch...