*myarchiexpo

Catalogs
SANY GROUP
Truck Mixer- SY204C-6Y(V)

Truck Mixer- SY204C-6Y(V)

Product catalog summary

Leading Edges Steering Technology
The large displacement power steering pump reduces operator effort by 40%. Optimizing chassis geometry and front axle steering angle reduces the turning circle by 15%.

Anti-Buildup Technology
The mixer features an innovative front taper and ball-crown connecting structure to prevent accumulation at the front and rear tapers. A flushing device at the rear taper clears accumulated concrete, reducing the residual rate at the discharging outlet by 0.4%.

Energy-Saving Technology
The truck is lightweight yet capable of carrying large loads. It features a dual-circuit power mode that optimizes engine and transmission matching, saving 10% on fuel consumption.

Low Deck Technology
Equipped with an ultra-high strength, integrated auxiliary frame, the truck ensures stability and high strength, adapting to rough conditions and prolonging service life. Engine braking reduces braking distance by 15% and brake lining wear by 50%. High volume air compressor and new sealing technology improve brake response time.

Improved Braking
Utilizes advanced braking systems to enhance safety and performance.

Technical Parameters

Model: SY204C-6Y(V)
Curb Weight: 7300 kg
GVW: 16900 kg
Dimensions: 7530×2320×3320 mm
Wheel Base: 4200 mm
Min. Ground Clearance: ≥225 mm
Min. Turning Diameter: ≤16 m
Fuel Consumption: ≤25 L/100km
Braking Distance: ≤10 m (Full load); ≤9 m (Empty load)

Chassis Configuration

Engine Model: Yuchai YC4EG140-50
Displacement: 4.73 L
Rated Power/Rev Speed: 105 kW/2500 rpm
Max. Torque/Rev Speed: 500 N.m/1300-1800 rpm
Emissions: China V
Gear-box: Fast 8JS75F
Front Axle: 9 t
Intermediate, Rear Axle: 2×13 t
Cab: Sanhuan Cab
Tyre: 9.00R20
Brake: Pneumatic dual-circuit drum
Gas Tank Capacity: 170 L

Drum Parameters

Capacity: 4 m3
Feeding Speed: ≥ 3 m3/min
Discharge Speed: ≥ 2 m3/min
Discharge Residual Rate: ≤ 0.5%
Slump: 50 – 210 mm
Water Tank Capacity: 300 L
Water Pressure: 0.35-0.38 MPa
Reducer: TOP T60
Hydraulic Pump: Sany HP4VC45HW
Motor: Sany HAA2FM56

Catalog excerpts

LEADING EDGES STEERING TECHNOLOGY The large displacement power steering pump reduces operator effort by 40%. By optimizing chassis geometry and front the front axle steering angle, the turning circle is reduced by 15%. ANTI-BUILDUP TECHNOLOGY An innovative front taper and ball-crown connecting structure, the mixer is shaped to prevent accumulation at front and rear tapers. The flushing device is installed at the rear taper, in order to clear accumulated concrete in the dead space. The residual rate at the discharging outlet is declined by 0.4%. IMPROVED BRAKING ENERGY-SAVING TECHNOLOGY The truck is light in weight but it undertakes large weight. With dual-circuit power mode, the engine matches the transmission well. It saves 10% of fuel consumption. LOW DECK TECHNOLOGY The truck is equipped with ultra-high strength, integrated auxiliary frame to ensure its stability and high strength. It adapts to various rough conditions meanwhile prolongs its service life. By making full use of engine braking, braking distance has been reduced by 15% and brake lining wear is decreased by 50%. Sany uses a high volume air compressor, high quality piping, and new sealing technology that shortens air and build up time to quicken brake response ti

Open the catalog to page 1

TECHNICAL PARAMETER OPTIONAL CONFIGURATION Rudder Direction Dimension (L×H×W)(mm) Wheel Base(mm) Curb Weight(kg) ●Standard ○Option -None ● 标配 ○ 选配 -无 Mixer drum forward and backward rotation sensor (GPS Terminal-EMEA must be installed) 搅拌筒正反转（必须安装树根盒子） Embedded Lock Machine Blind Zone Radar Rear View Camera ABS(Axles need replacing) Rated Power/Rev Speed(kW/rpm) Mixer Drum Cleaning Device Hopper Components Front Axle(t) Special Coating Intermediate, Rear Axle(t) Water Tank Capacity the Upper Guardrail Protecting Net of Mixer Drum 气压双回路鼓式制动 Pneumatic dual- circuit braking system with drum Discharge...

Open the catalog to page 2

All SANY GROUP catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list