1. Catalogs
  2. SANY GROUP
  3. Roller-SSR200AC-8H

Roller-SSR200AC-8H

Roller-SSR200AC-8H

Roller-SSR200AC-8H

Product catalog summary
Extended Lifetime
The SSR200AC-8H Single Drum Roller features a water wheel type lubrication system that extends the vibratory bearing life up to 5,000 hours. The engine's high intake air undergoes double filtration, and the hydraulic system includes a three-stage filtration process.
Operator Comfort
The cab is mounted on vibration damping mounts, with temperature control to enhance operator comfort. Control forces required by the operator have been reduced.
Safety Features
The roller is equipped with rounded bumpers at the front and rear, and a large rear glass with a sloped hood to improve visibility.
High Efficiency
The SSR200AC-8H provides a 10% greater excitation force compared to similar models, resulting in a 16.7% increase in compaction efficiency.
Technical Parameters
  • Operating Weight: 20,000 kg
  • Weight at Drum: 10,000 kg
  • Weight at Rear Axle: 10,000 kg
  • Drum Static Linear Load: 470 N/cm
  • Vibration Frequency: 29/35 Hz
  • Nominal Amplitude: 1.9/0.95 mm
  • Excitation Force: 368/258 kN
  • Drum Diameter: 1600 mm
  • Drum Width: 2130 mm
  • Drum Edge Thickness: 40 mm
  • Working Speed: 0-5 km/h
  • Travel Speed: 0-8 km/h
  • Gradeability: 30%
  • Ground Clearance: 440 mm
  • Wheelbase: 3185 mm
  • Steering Angle: ±35°
  • Swing Angle: ±12°
  • Min. Turning Outside Diameter: 12350 mm
  • Tires: 20.5-25-16PR
Engine Specifications
  • Brand: WEICHAI
  • Model: WP6G200E331
  • Emission: CHINA Ⅲ
  • Rated Power: 147 kW
Capacity Parameters
  • Battery: 24×120 V×Ah
  • Fuel Tank: 300 L
  • Hydraulic Oil Tank: 100 L
Standard and Optional Configurations
The standard configuration includes the main machine, engine, travel pump, vibration pump, travel motor, vibration motor, operating platform, vibratory drum, electrical system, operating system, front and rear frames, covering parts, rear axle assembly, center articulated frame, and cab with A/C. Optional configurations include a low-cost shed and vibratory drums with welded or assembled pad foot for different compaction needs.
See more

Catalog excerpts

Roller-SSR200AC-8H-1

SSR200AC-8H SINGLE DRUM ROLLER SSR200AC-8H 单钢轮压路机 HIGH EFFICIENCY products in the same category resulting in EXTENDED LIFE TIME ◆◆ The use of water wheel type lubrication on the ◆◆ 10% greater excitation force than other OPERATOR COMFORT vibratory bearing extends the bearing life up to 5,000 hours. ◆◆ Double filtration of engine high intake air, the ◆◆ Cab mounted on vibration damping mounts ◆◆ Cab temperature control hydraulic system contains three stage filtration. ◆◆ Operator control forces have been reduced SAFETY FEATURES ◆◆ Rounded bumpers front and rear ◆◆ Large rear glass and sloped hood for greater visibility

 Open the catalog to page 1
Roller-SSR200AC-8H-2

TECHNICAL PARAMETERS 工作质量 Operating Weight(kg) 振动轮分配质量 Weight at Drum(kg) 驱动桥分配质量 Weight at Rear axle(kg) 振动轮静线载荷 Drum Static Linear Load(N/cm) 振动频率 Vibration Frequency (Hz) 名义振幅 Nominal Amplitude(mm) 激振力 Excitation Force(kN) 振动轮直径 Drum Diameter(mm) 振动轮宽度 Drum Width(mm) 振动轮轮圈厚度 Drum Edge Thickness(mm) 工作速度 Working Speed(km/h) 行驶速度 Travel Speed(km/h) 容量参数 Capacity 机动性能参数 Maneuver Ability 理论爬坡能力 Gradeability 最小离地间隙 Ground Clearance(mm) 轴距 Wheelbase(mm) 转向角度 Steering Angle(°) 摇摆角度 Swing Angle(°) 最小转弯外直径 Min. Turning Outside Diameter(mm) 轮胎规格 Tires 供应商 Brand 型号 Model 排放 Emission 额定功率 Rated Power(kW)...

 Open the catalog to page 2

All SANY GROUP catalogs and technical brochures

  1. SI-16050

    5  Pages

  2. SR185-C10

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.