*myarchiexpo

Catalogs
SANY GROUP
Crawler crane-SCC600HD

Crawler crane-SCC600HD

1 / 20 PagesView full catalog

Crawler crane-SCC600HD

Product catalog summary

Major Specifications

Engine: Cummins QSL8.9-C325, 4 stroke, water-cooled, 242kW/2100rpm.
Hydraulic System: Kawasaki piston pump, open-circuit system, max pressure 32 Mpa.
Electrical System: SANY SYIC-II integrated control system with CAN BUS for data communication.
Main Hoist Winch: Drum pitch diameter 648mm, rope speed 0-115m/min.
Lowerworks: Independent crawler drive, max gradeability 30%.
Weight: Whole machine with basic boom 57.2t, ground pressure 0.075MPa.

Technical Parameters

Performance: Tamping energy 350t.m, boom length 19-25m, swing speed 2.0rpm.
Transport: Machine weight with basic boom 57200kg, transport dimensions vary with configuration.

Configurations

Boom/Jib Arrangements: Standard boom lengths for different configurations, including dynamic compaction.
Work Radius: Detailed work radius for various boom lengths and angles.
Load Charts: Ratings according to Chinese GB3811, considerations for safety and operational conditions.

Safety Devices

Emergency Stop: Cuts power supply in emergencies.
Function Lock: Prevents mis-operation by disabling handles when not in work position.
Monitoring System: Remote monitoring with GPS, GPRS, and diagnostic capabilities.

Specifications for Hooks
The document details two types of hooks: a 25-ton hook with a weight of 0.6 tons and a rated load of 17.5 tons using two parts of line, and a 50-ton hook with a weight of 1.3 tons and a rated load of 40 tons using three parts of line.

Procedures and Recommendations
During dynamic compaction, it is recommended that the hammer should not exceed 17.5 tons without a gantry. Adherence to the relationship between wire rope parts line, maximum rated load, and hook weight is crucial to prevent machine damage, which is not covered by warranty.

Load Charts
The load charts for the SCC600HD Crawler Crane detail the lifting capacities at various boom angles and heights. The crane has a base construction lifting capacity of 60 tons and a rear counterweight of 27.6 tons. The charts specify the front/back and left/right load capacities at different boom angles and heights.

Configuration
The SCC600HD Base Construction Crawler Crane is highlighted with a lifting capacity of 60 tons. Technical parameters and configurations are subject to change without prior notice due to updated technology.

Contact Information
Contact details for after-sales service and consulting are provided, along with the address of SANY Industrial Park in Zhejiang Province, China. The document also includes a note about scanning the official WeChat account for more information.

Legal Notice
The document includes a legal notice stating that all rights are reserved by Sany, and any part of the content cannot be copied without written permission. The document was printed in May 2021 in China.

Catalog excerpts

Base Construction Crawler Crane Quality Changes the World Tamping energy: 350t.m Max. boom length: 28m The parameters and diagrams in the brochure is only for reference, which is subject to further update in real machine.

Open the catalog to page 1

Base Construction Crawler Crane Major Specifications ▪ Product Speciﬁcation ▪ Safety Device ▪ Major Performance & Speciﬁcations Technical Parameters ▪ Outline Dimension ▪ Transport Dimension ▪ Transport Plan ▪ Work Radius of H Conﬁguration ▪ H Informatio

Open the catalog to page 2

BASE CONSTRUCTION CRAWLER CRANE 技术参数 350T·M TAMPING ENERGY QUALITY CHANGES THE WORLD Major Specifications ▪▪ Page 04 Product Specifi cation

Open the catalog to page 3

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Main Characteristics Product Specification ▪▪ Model: Cummins QSL8.9-C325; ▪▪ Type: 4 stroke, water-cooled, vertical in-line 6, direct injection,turbo-charger, intercooler; ▪▪ Displacement: 8.9L; ▪▪ Rated power: 242kW/2100rpm; ▪▪ Max. Torque: 1385N·m/1500rpm ; ▪▪ Cooling System: Water-cooled; ▪▪ Starter: 24V-6.0kW; ▪▪ Radiator: fin type core in aluminum; ▪▪ Air cleaner: Dry type with replaceable paper element; ▪▪ Throttle: Grip type hand throttle, electrically controlled; ▪▪ Fuel filter: Replaceable paper element;...

Open the catalog to page 4

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Main Characteristics Product Specification Swing Mechanism ▪▪ Swing unit is powered by hydraulic motor driving reducer to swing 360° rotation; ▪▪ Swing parking brakes: A normally-closed, embedded, wet spring loaded brake; braking through spring force, oil pressure released; ▪▪ Swing bearing: Single-row ball bearing; ▪▪ Swing lock: Lock devices on four position are designed to prevent swing backlash during traveling or transport. The rotating bed can be locked at front manually. After work or during transport,...

Open the catalog to page 5

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Main Characteristics Safety Device Assembly/Work Mode Switch ▪▪ In Assembly Mode, the auxiliary actions are enabled to facilitate crane assembly; ▪▪ In Work Mode, the auxiliary actions are disabled. Emergency Stop ▪▪ In emergent situation, this button is pressed down to cut off the power supply of whole machine and all actions stop. Function Lock ▪▪ If the function lock lever is not in work position, all the otherhandles won’t work, which prevents any mis-operation caused byaccidental collision. Swing Lock ▪▪...

Open the catalog to page 6

BASE CONSTRUCTION CRAWLER CRANE 技术参数 350T·M TAMPING ENERGY QUALITY CHANGES THE WORLD Technical Parameters ▪▪ Page 08 Major Performance & Specifications Outline Dimension Transport Dimension

Open the catalog to page 7

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Technical Parameters Major Performance & Specifications Major Performance & Specifications of SCC600HD Performance Indicators Tamping energy Allowed single rope tamping energy of hook-on type Allowed tamping hammer weight Boom length Boom luffing angle Boom Configuration Rope speed of main/aux. load hoist winch (3rd layer) Wire rope Swing speed Travel speed Rope speed of boom hoist winch (work layer) Main hoist wire rope: diameter × length Rated single line pull of main load hoist wire rope Rated power/revolution...

Open the catalog to page 8

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Technical Parameters Unit: mm Outline Dimension Quality Changes the World

Open the catalog to page 9

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Technical Parameters Transport Dimension Basic Machine 1 (with boom base and crawlers) Weight Basic Machine 2 (with boom base) Basic Machine 3 (with crawlers) Boom Base Quality Changes the World

Open the catalog to page 10

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Technical Parameters Transport Dimension Counterweight Tray Left Counterweight Block Right Counterweight Block Quality Changes the World

Open the catalog to page 11

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Technical Parameters Transport Dimension Carbody Counterweight Note: 1. The transport dimensions of each part in the table are schematic, not proportional to the real parts. The dimensions are designed value without package considered. 2. The Weight is designed value that the actual manufactured part may deviate a little. Quality Changes the World

Open the catalog to page 12

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Technical Parameters Transport Dimension Transport Plan 1 ▪▪ Basic Machine(with boom base and withoutcrawlers) ▪▪ Carbody counterweight × 2 ▪▪ Right counterweight ×3 6m boom ×2 3m boom ×1 Boom top x1 Left Crawler x1 Right Crawler x1 25t hook ×1 50t hook ×1 Counterweight tray ×1 Left counterweight ×3 Right counterweight ×1 9m boom ×2 3m boom ×1 Boom top x1 25t hook ×1 50t hook ×1 Counterweight tray ×1 Left counterweight ×3 Right counterweight ×3 Carbody counterweight × 2 ▪▪ Basic Machine(with boom base and crawlers)...

Open the catalog to page 13

BASE CONSTRUCTION CRAWLER CRANE 350T·M TAMPING ENERGY QUALITY CHANGES THE WORLD Cofigurations ▪▪ Page 15 Boom/jib arrangements ▪▪ Page 16 Work Radius of H Configuration ▪▪ Page 17 H Information ▪▪ Page 18 Load Chart

Open the catalog to page 14

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Boom/jib arrangements Boom base Boom arrangements Boom length Note: The standard offering for SDDC is 19m boom, no hook. The standard offering for dynamic compaction is 25m boom with 50t hook. Quality Changes the World

Open the catalog to page 15

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ Work Radius of H Configuration Swing centerline Quality Changes the World

Open the catalog to page 16

SCC600HD Base Construction Crawler Crane 60 Tons Lifting Capacity _________________ ▪▪ Ratings according to Chinese GB3811. ▪▪ Working radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity load. ▪▪ The weight of hook, slings and other riggings shall be deducted from the ratings to get the actual capacity. ▪▪ The ratings are calculated when the load is freely suspended without considering the effect of wind load, ground condition, levelness, operation speed or any other negative effect on safety operation. Therefore, the operator has the...

Open the catalog to page 17

All SANY GROUP catalogs and technical brochures