1. Catalogs
  2. SANY GROUP
  3. Crawler crane-SCC450A-6

Crawler crane-SCC450A-6

Crawler crane-SCC450A-6
1 / 28 PagesView full catalog

Crawler crane-SCC450A-6

Product catalog summary
Main Characteristics
The SCC450A-6 Crawler Crane is designed for high-capacity lifting with a maximum capacity of 45 tons and a lifting moment of 150 t·m. It features a boom length ranging from 10 to 40 meters, and a maximum boom plus jib configuration of 31m + 15.25m. The crane is powered by a WP4.1NG175E300 diesel engine, compliant with Chinese Non-road Tier III Emission Standards, providing 129kW at 2300rpm.
Technical Parameters
The crane's main winch rope speed ranges from 0 to 75 m/min, while the auxiliary winch can reach up to 125 m/min. The boom hoist winch operates at 0-60 m/min, and the swing speed is 0-2.5 rpm. The travel speed is limited to 2.2 km/h. The main and auxiliary load hoist wire ropes have a diameter of 16mm, with lengths of 180m and 120m, respectively.
Product Specifications
The hydraulic system includes open variable displacement piston pumps and a dual-gear pump for swing and control circuits, with a maximum pressure of 34MPa and a hydraulic tank capacity of 305L. The crane features an ergonomic operator's cab with a 7-inch touch screen for enhanced control.
Safety Devices
The crane is equipped with a Load Moment Indicator (LMI) system, over-hoist and over-release protection devices, and a tri-color load indicator. Additional safety features include an emergency stop button, function lock, boom hoist drum lock, and swing lock.
Configurations
The SCC450A-6 offers H and FJ configurations for flexible assembly and transport. The counterweight system is designed for easy assembly, with a total rear counterweight of approximately 10.5 tons.
Transport and Dimensions
The crane's transport dimensions ensure compliance with transport regulations and ease of assembly on-site. The basic machine measures 11.00m in length, 3.00m in width, and 3.24m in height, weighing 23.5 tons.
Load Charts
Load charts are provided for both H and FJ configurations, detailing rated capacities under different conditions, compliant with EN13000 standards.
Working Configurations
H Configuration: Offers boom lengths from 22m to 40m with various load capacities.
FJ Configuration: Includes combinations of boom and jib lengths, with detailed load capacities for different angles and lengths.
Additional Notes
The crane's rated capacities include the weight of hooks, wire ropes, and other riggings. All technical parameters are subject to change due to technological updates.
Contact Information
For after-sales service and consulting, contact numbers are provided, along with the address of the SANY Industrial Park in Zhejiang Province, China.
See more

Catalog excerpts

Crawler crane-SCC450A-6-1

Crawler Crane 45 Tons Lifting Capacity Quality Changes the World Max. lifting moment:150t·m Max. boom length:40m Max. boom+jib:31m+15.25m The parameters and diagrams in the brochure are only for reference, which are subject to further update in real machine.

 Open the catalog to page 1
Crawler crane-SCC450A-6-2

Main Characteristics Crawler Crane Series ▪ Product Specification ▪ Safety Device ▪ Major Performance & Specifications Technical Parameters ▪ Outline Dimension ▪ Transport Dimension ▪ Transport Plan

 Open the catalog to page 2
Crawler crane-SCC450A-6-3

SANY CRAWLER CRANE 技术参数 45 TONS LIFTING CAPACITY QUALITY CHANGES THE WORLD Main Characteristics ▪▪ Page 04 Product Specification

 Open the catalog to page 3
Crawler crane-SCC450A-6-4

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Main Characteristics Product Specification Engine ▪▪ Model: WP4.1NG175E300 Diesel Engine; ▪▪ Type: 4-stroke, water-cooled, vertical in-line, direct injection, turbo-charger, intercooler, complied with Chinese Non-road Tier III Emission Standard; ▪▪ Displacement: 4.1L; ▪▪ Rated power: 129kW/2300rpm; ▪▪ Operation power: 117kW/2000rpm; ▪▪ Max. Torque: 680N·m/1400-1600rpm; ▪▪ Starter: 24V-4.75kW. Electrical Control System ▪▪ Self-developed SYIC-II integrated control system is adopted with higher integration, precise operation and...

 Open the catalog to page 4
Crawler crane-SCC450A-6-5

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Main Characteristics Product Specification Boom Hoist Mechanism ▪▪ Boom hoist winches are driven separately by motor via gearbox. Operating winch handle can control the winch to rotate to two directions, which are lifting and lowering of boom; ▪▪ Drums with fold-line grooves can ensure the wire rope reeved in order in multilayers. Drum diameter Boom hoist mechanism Rope speed Wire rope diameter Wire rope length of boom hoist Swing Mechanism ▪▪ Swing brake adopts wet, spring loaded, normally-closed brake, and braking through spring...

 Open the catalog to page 5
Crawler crane-SCC450A-6-6

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Main Characteristics Product Specification Travel System ▪▪ Independent travel driving units are adopted for each side of the crawler, to realize straight walking and turning driven by travel motor through gearbox and drive wheel; ▪▪ Travel Speed: both high and low speed are set, and the highest speed is 2.2km/h; ▪▪ Gradeability: 40%. Travel Brake ▪▪ Concealed wet type and spring-loaded type normally engaged brake, spring force braking, oil pressure released. Crawler Extension and Retraction ▪▪ The crawlers can extend and retract...

 Open the catalog to page 6
Crawler crane-SCC450A-6-7

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Main Characteristics Safety Device Assembly Mode/Work Mode Switch ▪▪ In Assembly Mode, certain safety devices are disabled to facilitate crane assembly; ▪▪ In Work Mode, all safety devices activate to protect the operation. Emergent Stop ▪▪ In emergent situation, this button is pressed down to cut off the power supply of the whole machine and all actions stop. Load Moment Indicator (LMI) ▪▪ It is an independent computerized safety control system. LMI can automatically detect the load weight, work radius and boom angle, and present...

 Open the catalog to page 7
Crawler crane-SCC450A-6-8

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Main Characteristics Safety Device Tri-color Load Indicator ▪▪ The load indication light has three colors, green, yellow and red, and the real time load status is presented on the display. When the actual load is smaller than 90% of rated load, the green light is on; when the actual load is larger than 90% and smaller than 100%, the yellow light is on, the alarm light flashes and sends out intermittent sirens; when the actual load reaches 100% of rated load, the red light is on, the alarm light flashes and sends out continuous...

 Open the catalog to page 8
Crawler crane-SCC450A-6-9

SANY CRAWLER CRANE 技术参数 45 TONS LIFTING CAPACITY QUALITY CHANGES THE WORLD Technical Parameters ▪▪ Page 10 Major Performance & Specifications Outline Dimension Transport Dimension

 Open the catalog to page 9
Crawler crane-SCC450A-6-10

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Technical Parameters Major Performance & Specifications Major Performance & Specifications of SCC450A-6 Performance Indicators Unit Max. rated lifting capacity Boom configuration Boom length Max. rated lifting capacity Fixed jib configuration Rope speed of aux. winch Speed Rope speed of main winch Rope speed of boom hoist winch Swing speed Main load hoist wire rope: diameter × length Wire rope Travel speed Aux. load hoist wire rope: diameter × length Rated single line pull of main/aux. load hoist wire rope Rated power/revolution...

 Open the catalog to page 10
Crawler crane-SCC450A-6-11

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Technical Parameters Unit: mm Outline Dimension Quality Changes the World

 Open the catalog to page 11
Crawler crane-SCC450A-6-12

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Technical Parameters Transport Dimension Note: 1. he transport dimensions of each part in the table are schematic, not proportional to the real parts. The T dimensions are designed value without package considered. 2. he Weight is designed value that the actual manufactured part may deviate a little. T Track frame Boom base Quality Changes the World

 Open the catalog to page 12
Crawler crane-SCC450A-6-13

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Technical Parameters Transport Dimension Fixed jib base and stabilization brace Quality Changes the World

 Open the catalog to page 13
Crawler crane-SCC450A-6-14

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Technical Parameters Transport Dimension Counterweight tray Quality Changes the World

 Open the catalog to page 14
Crawler crane-SCC450A-6-15

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Technical Parameters Transport Plan Trailer 1 ▪▪ Basic Machine 9m boom ×2 6m boom ×1 3m boom ×1 Boom top ×1 Extension jib ×1 3.05m fixed jib ×3 Fixed jib base and stabilization brace ×1 Fixed jib top ×1 45t hook ×1 5t hook ×1 Counterweight block ×1 Counterweight tray ×1

 Open the catalog to page 15
Crawler crane-SCC450A-6-16

SANY CRAWLER CRANE 45 TONS LIFTING CAPACITY QUALITY CHANGES THE WORLD Boom Combination ▪▪ Page 18

 Open the catalog to page 16
Crawler crane-SCC450A-6-17

SCC450A-6 Crawler Crane 45 Tons Lifting Capacity _________________ Combination of Working Conditions Boom Combination Note: The schematics above are just reference for loading only. Quality Changes the World

 Open the catalog to page 17

All SANY GROUP catalogs and technical brochures

  1. SI-16050

    5  Pages

  2. SR185-C10

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.