SLU 04H17 - Wall-mounted Tap, Outlet Arm of 170 mm
1Pages

Automatic Wall-mounted Taps SLU 04H, SLU 04HT Characteristics: - Technical Specification: Installation Drawing: 1 - water supply 2 - feed cable from the power supply 3 - outlet arm 170 or 250 mm 4 - active range 5 - washbasin 6 - mounting box with brass screw-coupling, electromagnetic valve and ball valve 7 - stainless steel cover with electronics 8 - protective cover suitable for health service two sizes of outlet arms (lenght 170 and 250 mm) function of automatic water stop after 5 minut of continuous flow tap SLU 04H is destined for cold or premixed water tap SLU 04HT is destined for cold and hot water water temperature is regulated by automatic thermostatic mixer, pressure of hot and cold water must be the same water is flowing as long as hands are in the active range (max. range to 0,3 m) adjustable time delay from 0,25 to 7,75 sec. possibility of changing of time delay, active range and switching off by SLD 03 water flow could be regulated by ball valve START/STOP program Supply Specification: Stainless steel cover dimension - SLU 04Hxx - SLU 04HTxx Mounting box dimension - SLU 04Hxx - SLU 04HTxx Operating voltage - SLU 04Hxx, 04HTxx Power input - operating by 24V DC Active range - standard - START/STOP program Flow pressure Rate of flow Water inlet 174 x 219 x 10 mm 160 x 180 x 3 mm 140 x 140 x 75 mm 150 x 160 x 65 mm 24V DC 5W 0 - 0,3 m 0,05 - 0,1 m 0,1 - 0,6 MPa 12 l/min. (inf. data) male thread G ½˝ SLU 04H17 – supply No. 03041 stainless steel cover with integrated electronics; stainless steel mounting box with SLU 04HT17 – supply No. 43046 integrated electromagnetic valve (1 pc.), thermostatic mixer (1 pc.) and screw coupling SLU 04H25 – supply No. 03042 (only for SLU 04HTxx); plastic mounting box with electromagnetic valve (1 pc.), ball SLU 04HT25 – supply No. 43047 valve and brass-screw coupling (only for SLU 04Hxx); outlet arm 170 mm (only for SLU 04H17 and SLU 04HT17); outlet arm 250 mm (only for SLU 04H25 and SLU 04HT25) – supply No. 05012 external power supply 230/24V DC for operating of max. 2 pcs. of washbasin taps (see page 84) – supply No. 05011 external power supply 230/24V DC for operating of max. 4 pcs. of washbasin taps (see page 84) – supply No. 05030 switched power supply 230/24V DC for operating of max. 9 pcs. of washbasin taps (see page 84) – supply No. 05060 external power supply 230/24V DC for operating of max. 1 pc. of washbasin tap (see page 84) – supply No. 07030 universal remote control for an adjustment of parameters of all products with infra-red electronics (see page 85) – supply No. 09040 thermostatic valve ¾", rate of flow 28 l/min by the pressure 0,1 MPa (see page 85) – supply No. 09050 thermostatic valve ½", rate of flow 42 l/min by the pressure 0,1 MPa (see page 85) – supply No. 09070 thermostatic valve ¾", rate of flow 43 l/min by the pressure 0,1 MPa (see page 85) – supply No. 09080 thermostatic valve 1", rate of flow 53 l/min by the pressure 0,1 MPa (see page 85) – supply No. 09090 thermostatic valve 5/4", rate of flow 82 l/min by the pressure 0,1 MPa (see page 85) – supply No. 09100 thermostatic valve 6/4", rate of flow 155 l/min by the pressure 0,1 MPa (see page 85) Automatic Washbasin Taps Recommended Accessories: