Automatic Shower Controls SLS 02, SLS 02T Characteristics: - system reacts to the user attendance in front of the sensor, minimum stay time in active range is 2 seconds - water is flowing as long as an user is in the active range - water stops after user leaving the active range (adjustable time delay 0,25 - 7,75 sec.) - possibility of changing of time delay, active range and switching off by SLD 03 - function of automatic water stop after 5 minut of continuous flow - SLS 02 is destined for cold and hot water, temperature is regulated by mixer - SLS 02T is destined for cold and hot water, temperature is regulated by thermostatic mixer, pressure of hot and cold water must be the same - safety fuse against scalding - monitoring of battery capacity (only for models with „B“ index) Installation Drawing: 1 - water supply 2 - stainless steel cover with an electronics 3 - stainless steel box with valve 4 - active range 5 - mixer or thermostatic mixer 6 - outlet pipeline 7 - feed cable 8 - shower head (isn´t a part of delivery!) water outlet výstup vody Technical Specification: Dimension of stainless steel cover Dimension of plastic mounting box Operating voltage - SLS 02, SLS 02T - SLS 02B, SLS 02TB Power input - operating by 24V DC - operating by 9V Active range Recommended flow pressure Rate of flow Water inlet Water outlet 170 x 170 x 10 mm approx . 150 x 160 x 65 mm 24V DC external battery 9V 5W 1,4 W 0,3 - 0,7 m 0,1 - 0,6 MPa 12 l/min. (inf. data) male thread G 3/4“ male thread G 3/4“ teplá voda hot water cold water studená voda Supply Specification: SLS 02T – supply No. 02023 stainless steel stamped cover with an integrated electronics; stainless steel mounting box SLS 02TB – supply No. 02027 with a brass screw-coupling, integrated thermostatic mixer and electromagnetic valve (1 pc.); mounting set, lithium battery SLA09 (only for models with „B“ index) – supply No. 05012 external power supply 230/24V DC for operating of max. 2 pcs. of shower controls (see page 84) – supply No. 05011 external power supply 230/24V DC for operating of max. 4 pcs. of shower controls (see page 84) – supply No. 05030 switched power supply 230/24V DC for operating of max. 9 pcs. of shower controls (see page 84) – supply No. 05060 external power supply 230/24V DC for operating of max. 1 pc. of shower control (see page 84) – supply No. 07030 universal remote control for an adjustment of parameters of all products with infra-red electronics (see page 85) – supply No. 06090 lithium battery 9V/1300 mAh, type U9VL, battery life approx. 2 years at 100 uses per day (only for models with “B” index) (see page 85) – supply No. 06170 stainless steel vandal-proof shower head (see page 85) – supply No. 06280 shower head (see page 85) Automatic Shower Controls SLS 02 – supply No. 02020 stainless steel stamped cover with an integrated electronics; stainless steel mounting box SLS 02B – supply No. 02026 with a brass screw-coupling, integrated mixer and electromagnetic valve (1 pc.); mounting set; lithium battery SLA 09 (only for models with „B“ index)