1. Catalogs
  2. San Marco
  3. PROFESSIONAL SYSTEMS

PROFESSIONAL SYSTEMS

PROFESSIONAL SYSTEMS
1 / 20 PagesView full catalog

PROFESSIONAL SYSTEMS

Product catalog summary
Introduction
The document focuses on the restoration and protection of historic buildings, highlighting the necessity of analyzing materials before restoration. Colorificio San Marco offers environmentally friendly products designed to strengthen and protect these structures.

Consolidating Products
  • SILETIL 100: Solvent-based consolidator for natural stone and plasters, forming silica gel to restore mechanical properties while maintaining breathability.
  • ATOMO: Water-based acrylic bonding agent for degraded plasters, known for high penetration and reversibility.
  • MARCRYL 33: Acrylic resin dispersion for plasters, providing alkali resistance and weatherability.
  • NANOREP 10: Water-based siloxane consolidator for mineral stones, reducing water absorption while maintaining permeability.

Restoration Solutions
  • ACRYLTECH S: Resin-based consolidator for stone and wood, available in polished and satin finishes.
  • MARCOSIL PRIMER: Potassium silicate-based primer for wall surfaces.
  • NEPTUNUS PRIMER H: Water-based primer for plaster with hydrophobic properties.

Lime-Based Mineral Plasters
The BioMarc range uses natural hydraulic lime for environmentally compatible restoration, offering products like:
  • BIOmARC RINZAFFO: Bond coat for improving adhesion.
  • BIOmARC FINITURA: Finishing plaster with high vapor permeability.
  • BIOmARC DEUmIDIFICANTE: Dehumidifying plaster for moisture-affected walls.

Stone Protectants
  • NANOREP 10: Siloxane consolidator for mineral substrates.
  • SILETIL 100: Consolidating agent for stone materials.
  • H-REP SILOSSANICO: Siloxane protectant for vertical surfaces.
  • SOLVESIL: Water-repellent siloxane coating.

Breathable Protectants
Products like SOLVESIL and H-REP SILOSSANICO offer water-repellent protection without altering substrate appearance or permeability.

Mold Restoration
Mold, algae, and fungi can degrade wall surfaces, necessitating pest control interventions like COMBAT 222, an aqueous solution with active chlorine.

Product Specifications
  • COMBAT Series: Includes sanitizing and anti-mold additives for both indoor and outdoor use. COMBAT 333 and 444 are designed for mold treatment, while COMBAT 111 is for outdoor protection against molds, algae, and lichens.
  • Marcosil System: A silicate-based system offering breathable and weather-resistant finishes suitable for historic restorations.
  • Neptunus Siloxane System: Utilizes siloxane and acrylic resins for high vapor permeability and water repellency.
  • Lime-Based Products: Compatible with historical buildings, offering high permeability and mold protection.

Decorative Finishes
The document highlights decorative finishes inspired by traditional Venetian architecture, offering aesthetic appeal and protective qualities.

Protective Solutions
  • Metal Protectives: Products like MARCOTECH AU METAL PRIMER and UNIMARC SMALTO MICACEO provide corrosion resistance and decorative effects for metal surfaces.
  • Wood Protectives: Solutions such as MARCONOL PLASTIC OIL and UNIMARC PRIMER ANTITANNINO protect wood from weathering and organic pollutants.

Anti-Graffiti System
This system includes a graffiti remover and a protective layer (ISOGRAFF) to prevent graffiti on various surfaces, maintaining aesthetic integrity and ease of cleaning.

Conclusion
The document emphasizes the importance of using advanced systems that respect original materials while providing protection against environmental factors, particularly for buildings of historical and artistic significance.
See more

Catalog excerpts

PROFESSIONAL SYSTEMS-1

PROFESSIONAL SYSTEMS SOLUTIONS FOR THE RESTORATION RECOVERY AND PROTECTION OF HISTORIC BUILDINGS

 Open the catalog to page 1
PROFESSIONAL SYSTEMS-2

consolidating plasters protectants levelers finishes decorative anti-graffiti

 Open the catalog to page 2
PROFESSIONAL SYSTEMS-3

Recovery and protection of historic buildings Research and love for history The design of a restoration project should begin with a careful analysis of the materials involved. In order to find the most suitable solution, it is necessary to perform detailed diagnostic and knowledge tests on the nature of the support and on its condition of disrepair. With the experience gained over more than half a century of history in the world of paints and varnishes, Colorificio San Marco is now introducing a new range of products specifically dedicated to the Restoration. A wide range of solutions and systems...

 Open the catalog to page 3
PROFESSIONAL SYSTEMS-4

Consolidating For mineral supports and stone materials When the mineral materials or degraded ancient artifacts have problems of chalking, weathering or low cohesion, it is necessary to proceed with a preconsolidating treatment before any cleaning operation. The consolidation through specific products will restore the original texture of the substrate. Some high-tech products, as well as consolidate degraded materials, can at the same time protect them effectively. Siletil 100: mixture of esters of silicic acid dissolved in solvent medium concentration, suitable for the preconsolidation of natural...

 Open the catalog to page 4
PROFESSIONAL SYSTEMS-5

Acryltech S: protective consolidating resin-based methyl-butyl-acrylate dissolved in solvent, indicated for the consolidation and protection of natural and artificial stone materials, terracotta elements and wood materials. The product performs a function of consolidating on absorbent mineral substrates and a protective function on stone materials with low absorbency, such as marble and concrete. Available in the polished version as consolidating and in the satinfinished version as a protective. Reversible product. Neptunus Primer H: water-based primer based on polysiloxanes in water dispersion...

 Open the catalog to page 5
PROFESSIONAL SYSTEMS-6

Lime based mineral plasters In the restoration of historic buildings and for intervention in the green building The pure Natural Hydraulic Lime NHL 3,5 used in the BIOMARC range, as well as being in possession of CE marking and conforms to EN 459-1, meets the requirements of environmental compatibility because: • is exclusively constituted by raw materials of inorganic nature (minerals of natural origin) and bears no emission of volatile organic compounds (VOC), • the content of radioactive isotopes is in accordance with the typical average values of natural hydraulic limes; • the natural pH...

 Open the catalog to page 6
PROFESSIONAL SYSTEMS-7

GREENSPIRIT is the symbol of the environmental policies of Colorificio San Marco aimed at a continuous improvement of the environmental performance of its products. On the product of the Greenspirit range has been performed a study of the LGA (life cycle of the product). The publication of data ACL represents the strong desire to compete with market transparency through objective and measurable datas, away from the Greenwashing. BIOMARC DEUMIDIFICANTE Repair plaster for walls subject to moisture and efflorescence, specific for interventions in the green building and the restoration of historic...

 Open the catalog to page 7
PROFESSIONAL SYSTEMS-8

Stones protectants H-REP SILOSSANICO Stone and brick untreated The lower band of all the materials has not been treated to verify the behavior of the supports in contact with water. Interior-exterior water-based siloxane protectan Based on a non film-forming alkylalkoxysilane and siloxane based emulsion, for protecting vertical mineral and absorbent stony surfaces, concrete, aerated concrete, reinforced cement, calcareous rock, sandstone, rendering plaster and exposed brick. High water repellent, it drastically reduces surface water absorption and blocks the formation of unsightly whitish patches...

 Open the catalog to page 8
PROFESSIONAL SYSTEMS-9

Transparent colorless protective stone covering based on siloxanes and acrylates Based on acrylic resins and polysiloxane to protect stone, exposed brick and concrete surfaces. Consolidates and prevents the support surface from gradually crumbling. Does not affect the permeability of the support surface, and revives the paint color. Blocks water absorption. VERNICE ACRILICA LUCIDA Transparent protective coating for stone materials Based on acrylic resins in solution, suitable for protecting exposed cement, natural stone, marble, putty and plastic. High elasticity, water repellence. Excellent...

 Open the catalog to page 9
PROFESSIONAL SYSTEMS-10

Breathable protectants For minerla and stone surfaces The atmospheric agents and pollutants, as well as the inevitable wear of time, attack the historical materials, compromising the integrity and aesthetic appearance. These phenomena can be counteracted by the use of suitable protective products. Facciavista Pro: protective stone covering based on siloxanes medium molecular weight of butyl acrylate and methyl-siloxanes and dissolved in appropriate solvents, indicated to consolidate and protect absorbent mineral substrates such as stone, exposed brick and concrete surfaces. The product has a...

 Open the catalog to page 10
PROFESSIONAL SYSTEMS-11

Mold restorating For mineral surfaces Mold, algae and fungi are agents of biological degradation for the wall surfaces. Some factors may cause the growth of these microorganisms: Exposure to the north and north-west, or inclement weather, lack of sunshine and ventilation, presence of moisture, capillary rise of water from the ground, close range by spore-bearing plants etc. This is not only an aesthetic problem, because it can have an impact on the hygiene of the premises and can result in a significant degradation of the supports, with color variations in surfaces. It is therefore necessary...

 Open the catalog to page 11
PROFESSIONAL SYSTEMS-12

Exterior/Interior finishes The intervention of protection and decoration of buildings that belong to the rich historical and artistic heritage of our cities must be made with advanced systems, respectful of the original materials and at the same time protecting facades against atmospheric agents and pollutants. All this without forgetting the final aesthetic effect, which must always be the prestige of the building to be restored. The various solutions offered, a predominantly mineral composition, effectively combine these different needs: the perfect synthesis between tradition and modernity....

 Open the catalog to page 12

All San Marco catalogs and technical brochures

  1. Acrisyl Light

    4  Pages

  2. Fumex Mat

    3  Pages

  3. Wall Cream

    61  Pages

  4. ALLOVER

    8  Pages

  5. ALLOVER BASE

    1  Page

  6. ACRYLOSILOX

    2  Pages

  7. UNIMARC HOBBY

    2  Pages

  8. COMPANY PROFILE

    13  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.