Fumex Mat Odorless solvent-based, matt stain-covering wall paint for interiors San Marco Group Spa www.san-marco.com SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia DESCRIPTION FUMEX MAT is a mat masonry paint for interiors capable of covering and blocking recurrent stains caused by smoke, soot, coffee, and by nicotine and tar deposits. The paint's formulation is based on odourless solvents with an extremely low hazard factor, which notably improve work conditions. The paint's high water-resistance, together with excellent breathability, makes FUMEX MAT particularly suitable for use in damp rooms such as bathrooms, kitchens, basements, etc.. FUMEX MAT can be applied on surfaces such as plastering, concrete, gesso, wood, plasterboard, chipboard and old paint - even if it is chalking - without the use of fixative. The special rheology of the product means it is easy to apply. TECHNICAL - Nature of the binder: acrylic resin dispersed in a solution. SPECIFICATIONS - Solvent: odourless isoparaffin - Drying (at 25 C and 65% R.H.): touch dry in 2 hours; coatability after 6 hours. INSTRUCTIONS FOR USE The product can be applied on interior surfaces featuring recurrent stains which are difficult to remove, caused by smoke, tar, stagnant water, etc.: - New and old plasters based on hydraulic binders. - Concrete surfaces. - Gypsum and gypsumboard surfaces. - Old paints and wall coatings that are organic or mineral in nature, dry, compact, absorbent and cohesive. - Mineral conglomerates of various kinds, as long as they are absorbent. Surfaces should be adequately prepared by following the instructions given in the paragraph 'PREPARING THE SURFACE'. Technical data sheet: FUMEX MAT Revision: 2024-09-23

SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia Do not apply on freshly painted surfaces. - Make sure that the surface has a maturing time of at least 28 days. - Check the state of repair. The surface must be consistent. If this is not the case, take measures to reconstruct and strengthen the surface using specific products. - Remove any efflorescence by buffing or washing. - If the surface features any old paint, remove any parts which are flaking or which are not entirely adherent. - Level any unevenness on the surface. Holes, cracks and depressions indoors can be treated using...

SAN MARCO is a brand of San Marco Group Spa SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia - Tools should be cleaned immediately after use with Odourless thinner 5240040. - Do not apply when the relative humidity of the air is >80% and the humidity of the surface >10%, and when the air and/or surface temperatures are below +5 C and above 35 C. - Indicative spreading rate: 6-7 m2/l per coat based on smooth surfaces featuring average absorption. It is advisable to determine the actual spreading rate by performing a preliminary test on the specific surface. The product is available...