video corpo

ACRYLOSILOX
2Pages

{{requestButtons}}

Catalog excerpts

ACRYLOSILOX - 1

ACRYLOSILOX OPAQUE SILOXANE FINISH FOR INTERIORS - HIGH BREATHABILITY - ZERO VOC series 362 DESCRIPTION ACRYLOSILOX is a high-quality water paint based on modified siloxanic polymers and special additives that give the product excellent breathability and high water repellency. Recommended for walls and ceilings, it creates matt finishes with high whiteness. Excellent coverage. Formulated respecting Kuenzle's theory. It has a capillary water absorption, W, of less than 0.5 kg/m²h^0.5 and a vapour diffusion resistance, Sd, of less than 2 m. Easy to apply, it is very quick-drying and can be overcoated after 3 hours. Odourless, free of volatile organic compounds (VOC) plasticizers and formaldehyde. ACRYLOSILOX is formulated with a binder derived from renewable biomass according to the "mass-balance" approach, and is RedCert2-certified. - The backgrounds must be in good condition, dry, compact, absorbent, and consistent. - To obtain smooth and even finishes on particularly porous and uneven backgrounds, we recommend first applying the water-based acrylic paint IMPRESSOMARC PLUS. - On gypsumboard, we recommend a coat of the acrylic water-based primer paint IMPRESSOMARC PLUS before applying the finishing product. Wall surfaces to be dehumidified: - Milling must be done with a mechanical milling machine until you obtain a layer suitable for anchoring. - The surface must be consistent, non-deformable, absorbent, and clean of salt bloom and paints. - Before applying the finishing product, apply the NEPTUNUS or NEPTUNUS FAST dehumidifying system, followed by NEPTUNUS PRIMER H fixative (see the relevant technical data-sheets). APPLICATION INSTRUCTIONS Applicable for interiors on: - New and old plasters based on hydraulic binders. - Concrete surfaces. - Plaster and gypsumboard surfaces. - Old paints and organic or mineral coatings that are dry, compact, absorbent and not damaged. - Various mineral conglomerates, provided they are absorbent. - Dehumidifying plasters if indoors. The surfaces must be suitably prepared following the instructions in the paragraph 'BACKGROUND PREPARATION'. Do not apply onto fresh backgrounds that are rather alkaline. An adequate curing time must be allowed, generally of four weeks. - Ambient and background conditions: Ambient temperature: min. +8 °C, max. +35 °C. Ambient relative humidity: <75%. Background temperature: min. +5 °C, max. +35 °C. Dry background. - Tools: brush, roller, spray and airless. - Coats: at least 2 coats. - Dilution agent: water - Dilution: .brush, roller: ready to use or maximum 10%. .airless 10% (nozzle diameter: 0.38-0.53 mm / 0.015-0.021 in.; pressure: 150-180 bar / 2176-2611 psi). - Equipment cleaning: with water immediately after use. - Indicative coverage: 10-14 m2/l per coat, referred to smooth, moderately-absorbent backgrounds. We recommend checking actual yield by making a preliminary test on the specific background. TECHNICAL SPECIFICATIONS - Binder type: modified siloxane polymer in aqueous dispersion - Indoor Air Quality Classification: A+ - VOC content Directive 2004/42/EC: <1 g/l - UNI EN 13300 classification: Washing resistance ISO 11998: class 2 .Gloss level EN ISO 2813: <5, very matt .Coverage ISO 6504-3: class 1 at a yield of 7 sq.m/l Additional features - Density UNI EN ISO 2811-1: 1.50±0.05 kg/l - Solvent: water - Dry residue by weight: 61±2%. - Permeability to water UNI EN 1062-3: low, w<0.1 kg/m2h^0.5 - Water vapour permeability UNI EN ISO 7783-2: high, Sd<0.14 m (Sd=0.08) - Exterior-wall protection according to Kuenzle's theory DIN 18550: W<0.5 kg/m2h^0.5 and Sd<2 metres - Reaction to fire EN 13501-1: Class A2 s1 d0 Referred to consumption no greater than that indicated, and to application onto a non-combustible surface. - Drying (at 25 °C and 65% relative humidity): to the touch in 60 min.; can be painted over after 3 hours. TINTING Colouring can be obtained with the Tintometric System. The product can also be coloured with the COLORADO 548 series dyes. If different manufacturers are used, we recommend mixing the various productions to avoid slight differences in tone. STORAGE Maximum storage temperature: +30 °C Minimum storage temperature: +5 °C The product should be used preferably within 3 years from the production date if stored in its original unopened pot and at the appropriate temperatures. San Marco Group Spa - Via Alta 10 - 30020 Marcon (VE) - Tel +39 041 4569322 - www.san-marco.com - info@san-marco.it - export@san-marco.it

Open the catalog to page 1
ACRYLOSILOX - 2

ACRYLOSILOX OPAQUE SILOXANE FINISH FOR INTERIORS - HIGH BREATHABILITY - ZERO VOC series 362 SAFETY RULES Limit value EU (Dir. 2004/42/EC) Cat. A/a: Matt coatings for interior walls and ceilings (gloss≤25@60°) (water-base): 30 g/l (2010) The product contains max: 1 g/l VOC Use the product according to current standards of hygiene and safety after use, do not litter containers, allow the residue to dry and treat them as special waste. Do not empty into drains, water courses or onto the ground. For more information see the safety data sheet. SPECIFICATION ITEM --- SAN MARCO GROUP guarantees...

Open the catalog to page 2

All San Marco catalogs and technical brochures