Acrylosatin Plus
1 / 3Pages

Acrylosatin Plus SATIN ACRYLIC FINISH - HIGH UNIFORMING POWER - ZERO VOC San Marco Group Spa www.san-marco.com SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia DESCRIPTION ACRYLOSATIN PLUS is a high-quality acrylic water paint, recommended for walls and ceilings. It produces finishes with a very-uniform, satin appearance. Perfectly evens the background absorption and allows the surfaces to be cleaned easily thanks to its high stain resistance. Easy to apply, it is very quick-drying and can be overcoated after 3 hours. Odourless, free of volatile organic compounds (VOC) plasticizers and formaldehyde. ACRYLOSATIN PLUS is formulated with a binder derived from renewable biomass according to the "mass-balance" approach, and is RedCert2-certified. Fossil resource saving product by using renewable raw materials in the value chain. The product complies with the Indoor Air Comfort Gold specification of Eurofins. TECHNICAL - Binder type: Acrylic copolymer in aqueous dispersion SPECIFICATIONS - Indoor Air Comfort Gold certification (Eurofins IACG-442-01-01) - Indoor Air Quality Classification: A+ - VOC content Directive 2004/42/EC: <1 g/l - EN 13300 classification: Washing resistance ISO 11998: class 1 .Gloss level EN ISO 2813: 15±2, satin .Coverage ISO 6504-3: class 2 at a yield of 7 sq.m/l Additional features - Solvent: water - Reaction to fire EN 13501-1: Class A2 s1 d0 Referred to consumption no greater than that indicated, and to application onto a non-combustible surface. - Drying (at 25 °C and 65% relative humidity): to the touch in 30 min.; can be painted over after 3 hours. Technical data sheet: ACRYLOSATIN PLUS Revision: 2024-09-23

SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia PREPARING THE SURFACE APPLICATIONINSTRUCTIONS TINTING STORAGE SAFETY RULES Technical data sheet: ACRYLOSATIN PLUS Revision: 2024-09-23 Applicable indoors and outdoors (only on sheltered surfaces) on: - New and old plasters based on hydraulic binders. - Concrete surfaces. - Plaster and gypsumboard surfaces. - Old paints and organic or mineral coatings that are dry, compact, absorbent and not damaged. - Various mineral conglomerates, provided they are absorbent. The surfaces must be suitably prepared following the instructions in...

SAN MARCO is a brand of San Marco Group Spa SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia The product contains max: 1 g/l VOC Use the product according to current health and safety regulations; after use, do not discard the containers in the environment; allow the residue to dry thoroughly, then treat as special waste. Store out of the reach of children. Do not dispose of residues in the sewers, waterways or ground. For more information consult the safety data sheet. Technical data sheet: ACRYLOSATIN PLUS Revision: 2024-09-23 SAN MARCO GROUP guarantees that the information...