Acrisyl Light LIGHTENED ACRYLIC-SILOXANIC COATING WITH HIGH PERFORMANCE MILDEW/MOULD INHIBITING, GRAIN 1.5 San Marco Group Spa www.san-marco.com SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia SERIES 434 ACRISYL LIGHT - V.2024-09-23 Fibrous wall coating for exteriors with an innovative formulation that combines the traditional strength and durability of acrylic-siloxane coatings with numerous properties deriving from the product's special microcellular structure: - Highly lightweight, up to 25% less weight per m2 compared to a product of the same grain. This facilitates application, handling on site and makes work less tiring. • High yield per kg, resulting in reduced on-wall weight. • Flexible, allowing compression and shock absorption. • Adheres instantly to the substrate, preventing product wastage and keeping the ground of the work-sites clean. • Excellent water vapour permeability and water repellency: it lets rainwater run-off and resists the absorption of dirt/grime, meaning walls remain clean for a long time. • In the lighter shades, it reflects the sun's action, thus reducing the temperature of the walls. • Very compact finish with high levelling power, ideal for uneven surfaces. Suitable for both traditional surfaces and those insulated with the ETICS system, particularly suitable for restoring thermal-insulation systems. TECHNICAL - Nature of binder: acrylic polymers with siloxane modification in water emulsion SPECIFICATIONS - Pigments and fillers: mineral fillers, marble grits, lightening additives - Solvent: water - Viscosity: pasty consistency - Alkali resistance UNI 10795: alkaliproof - Classification of reaction to fire EN13501-1: Class A2 s1 d0 Referred to a consumption not exceeding that indicated, and to an application on a non-combustible surface. Technical data sheet: ACRISYL LIGHT Revision: 2024-09-23

SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia - Water vapor permeability per UNI EN ISO 7783-2: high, Sd<0,14 m - Masonry preservative in conformity with the Kuenzle theory per DIN 18550: W<0,5 kg/m2hA0,5 and Sd<2 meters - Mould and algae resistant per UNI EN 15457 and UNI EN 15458 - Drying (at 25°C and 65% R.H.): from 1 hour and 30' to 3 hours, depending on the thickness applied. - External Thermal Insulation Composite Systems (ETICS). - New and old plasters based on hydraulic binders. - Concrete surfaces. - Old paints and wall coatings that are organic or mineral in nature,...

SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia 222 Detergente (detergent) 4810222 and COMBAT 333 Risanante (restorer) 4810333; - Clean surfaces by low-pressure water washing, removing any blooming; - Before applying the new surface layer, all necessary preliminary repairs must be carried out (e.g. sealing of cracks and defects, localised replacement of damaged panels, repair of deteriorated joints and connections, etc.); - When the background is dry, apply one coat of ATOMO 8840001 solvent-free micronised fixative primer. After at least 4 hours, apply a reinforced skim coat incorporating...

SAN MARCO is a brand of San Marco Group Spa SAN MARCO GROUP Via Alta 10/A - 30020 Marcon (Venezia), Italia - Tools: plastic or steel trowel. - Diluting: ready to use. The viscosity of the product can be adjusted by adding a maximum 1% of water. - Mix the product before applying. - Nr coats: 1. Spread the product evenly over the support surface with the plastic trowel and even it out before it begins to form a surface film. - Clean tools with water immediatly after use. - Indicative spreading rate: 1,8 - 2,1 kg/m2 on surfaces with average porosity. We recommend performing a field test on the specific...