X-TRA
20Pages

{{requestButtons}}

Catalog excerpts

X-TRA - 1

COMMERCIAL GLASS- AND DISHWASHERS LAVE-VERRES ET LAVE-VAISSELLE PROFESSIONNELS

Open the catalog to page 1
X-TRA - 2

SOLUTIONS Founded in 1961 and with over 50 years of experience in the sector, Sammic has been manufacturing ware washing equipment since 1968. This experience and know-how, along with our proximity to the distributor and our in-depth analysis of the different types of end users, have been key for the development of our range of Glasswashers and Dishwashers organised into 3 series with different levels of performance, with a single aim: to be the RIght Choice for each User of these units. Commencing with the PRO series, conceived to obtain a fully guaranteed professional result whilst...

Open the catalog to page 2
X-TRA - 4

CLEAN AND HYGIENIC RESULTS EFFICACITÉ EN NETTOYAGE ET HYGIÈNE High-performance dispersers The high performance dispersers by Sammic, made in stainless steel, recessed and of high quality, guarantee even distribution of the wash water without blind spots and with precise spray pattern, obtaining perfect wash results even with the most stubborn soiled items. Efficiency of the filtering system Double filtering system for greater protection of the wash pump. All models also have an additional safety filter for the drain pump. Optimal washing and rinsing temperatures Guaranteed washing (55ºC)...

Open the catalog to page 4
X-TRA - 6

MAXIMUM COMFORT FOR THE USER CONFORT MAXIMAL POUR L'UTILISATEUR Easy and intuitive operation The use of Sammic dishwashers is simple enough to require little attention. Utilisation facile et intuitive L'utilisation des lave-vaisselle Sammic est suffisamment simple pour ne nécessiter qu'un minimum d'attention. Filling and heating of the tank The filling and heating of the tank is totally automatic, reducing the intervention of the user to a minimum. Remplissage et chauffage de la cuve Le remplissage et le chauffage de la cuve sont entièrement automatiques, afin de réduire au minimum...

Open the catalog to page 6
X-TRA - 7

ECONOMY AND ENVIRONMENT ÉCONOMIE ET ENVIRONNEMENT Environment-friendly Low consumption of water and detergent per cycle and a reduction of energy consumption are achieved without sacrificing the effectiveness of the washing, contributing towards better sustainability and respect for the environment. Switched elements, limited consumption The washing and rinsing elements are switched to limit the required installed power. Minimisation of waste and the possibility of recycling Sammic focuses on generating the least amount of material waste and on the best possible recycling capacity for its...

Open the catalog to page 7
X-TRA - 8

FLEXIBILITY AND VERSATILITY SOUPLESSE ET VERSATILITÉ Program selection Selection of 3 washing cycles depending on the material to be washed or on the amount of soil. Temperature display Visualisation of washing and rinsing temperatures (X-50 upwards) and LEDs indicating the state of the machine. Thermal cycle delay Guarantees that the minimum rinsing temperature at the start of the cycle is 85ºC. Guarantee of disinfection and hygiene. Final cold rinsing Depending on the use intended for the glasses after washing, it may be more important that the glass is cold rather than dry. With the...

Open the catalog to page 8
X-TRA - 10

PERFORMANCE AND PROFITABILITY RENDEMENT ET RENTABILITÉ Steam condenser with heat recovery system In the hood-type models, thanks to the innovative HRS system by Sammic, the machine extracts the hot water steam from inside and uses its energy to heat the water coming in from the mains. This reduces your energy costs by 30% and also permanently improves the environment, reducing the temperature of the exhaust air by half. Double wall door Constant temperature rinsing Constant temperature rinsing guarantees perfect hygiene in ware washing. The HHR system by Sammic offers a total guarantee in...

Open the catalog to page 10
X-TRA - 11

QUALITY AND RELIABILITY QUALITÉ ET FIABILITÉ Matériaux de haute qualité Construction in AISI 304 18/10 stainless steel of the highest quality with a “scotch brite” finish, to obtain maximum durability even in tough working conditions. Fabrication en acier inoxydable AISI 304 18/10 de la plus haute qualité avec finition “scotch brite”, pour obtenir une longévité maximale, y compris lors de conditions de travail intenses. In addition to the rigourous controls that each component goes through, all the machines are tested after their assembly. Outre les rigoureux contrôles auxquels les...

Open the catalog to page 11
X-TRA - 12

VERSATILITY AND ADAPTABILITY range · gamme ::Xtra:: GLASSWASHERS │LAVE-VERRES ● Electronic control panel: automatic operation. ● 350 x 350 mm. basket. basket. ● Usable height: 220 mm. ● 3 washing cycles: 120”/180”/130” with cold rinse facility. ● Wash tank heating: 1.5 kW. ● Boiler heating: 2.8 kW. ● Option: built-in water softener. ● Electronic control panel: automatic operation. ● 400 x 400 mm. basket. basket. ● Usable height: 240 mm. ● 3 washing cycles: 120”/180”/130” with cold rinse facility. ● Wash tank heating: 1.5 kW. ● Boiler heating: 2.8 kW. ● Options: built-in water softener,...

Open the catalog to page 12
X-TRA - 13

VERSATILITÉ ET ADAPTATION range · gamme ::Xtra:: X-41 ● Electronic control panel: automatic operation. ● 400 x 400 mm. basket. basket. ● Usable height: 280 mm. ● Complete with upper wash arms. ● 3 washing cycles: 120”/180”/130” with cold rinse facility. ● Wash tank heating: 1.5 kW. ● Boiler heating: 2.8 kW. ● Options: built-in water softener, drain pump. ● Panneau électronique: fonctionnement automatique. ● Panier de 400 x 400 mm. ● Hauteur de passage: 280 mm. ● Avec lavage supérieur. ● 3 cycles fixes: 120”/180”/130” (rinçage eau froide compris). ● Cuve de lavage: 1.5 kW. ● Chaudière de...

Open the catalog to page 13
X-TRA - 14

VERSATILITY AND ADAPTABILITY range · gamme ::Xtra:: FRONT LOADING DISHWASHERS │LAVE-VAISSELLE À CHARGEMENT FRONTAL X-45 ● Compact dishwasher. ● Electronic control panel: automatic operation. ● 450 x 450 mm. basket. basket. ● Usable height: 280 mm. ● 3 washing cycles: 120”/180”/210”. ● Wash tank heating: 1.5 kW. ● Boiler heating: 2.8 kW. ● Option: drain pump. ● Lave-vaisselle compact. ● Panneau électronique: fonctionnement automatique. ● Panier de 450 x 450 mm. ● Hauteur de passage: 280 mm. ● 3 cycles fixes: 120”/180”/210”. ● Cuve de lavage: 1.5 kW. ● Chaudière de rinçage: 2.8 kW. ● Option:...

Open the catalog to page 14

All Sammic catalogs and technical brochures

  1. Salad Dryers

    8 Pages

Archived catalogs

  1. COMBI CK-48V

    2 Pages

  2. COMBI CK-45V

    2 Pages

  3. COMBI CK-38V

    2 Pages

  4. COMBI CK-35V

    2 Pages

  5. X TRA

    20 Pages

  6. HOSE REELS

    1 Pages

  7. FAUCETS

    1 Pages

  8. Trays

    1 Pages

  9. Grids

    1 Pages

  10. LU-61H

    1 Pages

  11. LU-60

    1 Pages

  12. SRC-5000

    2 Pages

  13. SRC-4000

    2 Pages

  14. SRC-3600

    2 Pages

  15. SRC-3300

    2 Pages

  16. SRC-2700

    2 Pages

  17. SRC-1800

    2 Pages

  18. SK-3

    1 Pages

  19. CK-5

    1 Pages

  20. CA-301 VV

    1 Pages

  21. Containers

    1 Pages

  22. NX25A

    1 Pages

  23. SL-650C

    1 Pages

  24. Supra

    20 Pages

  25. Pro

    16 Pages

  26. Ware Washing

    12 Pages