Catalog excerpts
EXCELLENCE AT THE SERVICE OF WARE WASHING L'EXCELLENCE AU SERVICE DU LAVAGE DE LA VAISSELLE COMMERCIAL GLASS- AND DISHWASHERS LAVE-VERRES ET LAVE-VAISSELLE PROFESSIONNELS
Open the catalog to page 1SOLUTIONS Founded in 1961 and with over 50 years of experience in the sector, Sammic has been manufacturing ware washing equipment since 1968. This experience and know-how, along with our proximity to the distributor and our in-depth analysis of the different types of end users, have been key for the development of our range of Glasswashers and Dishwashers organised into 3 series with different levels of performance, with a single aim: to be the RIght Choice for each User of these units. Commencing with the PRO series, conceived to obtain a fully guaranteed professional result whilst...
Open the catalog to page 2CLEAN AND HYGIENIC RESULTS EFFICACITÉ EN NETTOYAGE ET HYGIÈNE High-performance dispersers The high performance dispersers by Sammic, made in stainless steel, recessed and of high quality, guarantee even distribution of the wash water without blind spots and with precise spray pattern, obtaining perfect wash results even with the most stubborn soiled items. Efficiency of the filtering system Double filtering system for greater protection of the wash pump. All models also have an additional safety filter for the drain pump. Optimal washing and rinsing temperatures Guaranteed washing (55ºC)...
Open the catalog to page 4MAXIMUM COMFORT FOR THE USER CONFORT MAXIMAL POUR L'UTILISATEUR Easy and intuitive operation The use of Sammic dishwashers is simple enough to require little attention. Manipulation facile et intuitive La manipulation des lave-vaisselle Sammic est suffisamment simple pour ne nécessiter qu'un minimum d'attention. Filling and heating of the tank The filling and heating of the tank is totally automatic, reducing the intervention of the user to a minimum. Remplissage et chauffage de la cuve Le remplissage et le chauffage de la cuve sont entièrement automatiques, afin de réduire au minimum...
Open the catalog to page 6ECONOMY AND ENVIRONMENT ÉCONOMIE ET ENVIRONNEMENT Environment-friendly Low consumption of water and detergent per cycle and a reduction of energy consumption are achieved without sacrificing the effectiveness of the washing, contributing towards better sustainability and respect for the environment. Switched elements, limited consumption The washing and rinsing elements are switched to limit the required installed power. Minimisation of waste and the possibility of recycling Sammic focuses on generating the least amount of material waste and on the best possible recycling capacity for its...
Open the catalog to page 7FLEXIBILITY AND VERSATILITY SOUPLESSE ET VERSATILITÉ Program selection Selection of 3 washing cycles depending on the material to be washed or on the amount of soil. Temperature display Visualisation of washing and rinsing temperatures and LEDs indicating the state of the machine. Thermal cycle delay Guarantees that the minimum rinsing temperature at the start of the cycle is 85ºC. Guarantee of disinfection and hygiene. Final cold rinsing Depending on the use intended for the glasses after washing, it may be more important that the glass is cold rather than dry. With the option of final...
Open the catalog to page 8PERFORMANCE AND PROFITABILITY RENDEMENT ET RENTABILITÉ Steam condenser with heat recovery system In the hood-type models, thanks to the innovative HRS system by Sammic, the machine extracts the hot water steam from inside and uses its energy to heat the water coming in from the mains. This reduces your energy costs by 30% and also permanently improves the environment, reducing the temperature of the exhaust air by half. Thermal and acoustic insulation The double wall construction allows for a better retention of heat (40%), reducing energy consumption and improving the efficiency of the...
Open the catalog to page 10QUALITY AND RELIABILITY QUALITÉ ET FIABILITÉ Matériaux de la plus grande qualité Construction in AISI 304 18/10 stainless steel of the highest quality with a “scotch brite” finish, to obtain maximum durability even in tough working conditions. Fabrication en acier inoxydable AISI 304 18/10 de la plus haute qualité avec finition “scotch brite”, pour obtenir une durabilité maximale, y compris lors de conditions de travail intenses. In addition to the rigourous controls that each component goes through, all the machines are tested after their assembly. Outre les rigoureux contrôles auxquels...
Open the catalog to page 11EXCELLENCE AT THE SERVICE OF WARE WASHING RANGE · GAMME ::SUPRA:: GLASSWASHERS │LAVE-VERRES S-41 ● Electronic control panel: automatic operation. ● 400 x 400 mm. basket. ● Usable height: 280 mm. ● 3 washing cycles: 120”/180”/130” with final cold rinse facility. ● Wash tank heating: 1,5 kW. ● Boiler heating: 2,8 kW. ● Wash and rinse temperature display. ● Options: · Drain pump. · Built-in water softener. ● Panneau électronique: fonctionnement automatique. ● Panier de 400 x 400 mm. ● Hauteur de passage: 280 mm. ● 3 cycles fixes: 120”/180”/130” avec rinçage eau froid. ● Cuve de lavage: 1,5 kW....
Open the catalog to page 12L'EXCELLENCE AU SERVICE DU LAVAGE DE LA VAISSELLE
Open the catalog to page 13EXCELLENCE AT THE SERVICE OF WARE WASHING RANGE · GAMME ::SUPRA:: FRONT LOADING DISHWASHERS │LAVE-VAISSELLE À CHARGEMENT FRONTAL S-50 ● Multi-phase model. ● Electronic control panel: automatic operation. ● 500 x 500 mm. basket. ● Usable height: 330 mm. ● 3 washing cycles: 120”/150”/210”. ● Wash tank heating: 2.5 kW. ● Boiler heating: 3 kW. ● Wash and rinse temperature display ● In option: built-in water softener, drain pump, stainless steel top-of-tank filter set. ● Commutable. ● Panneau électronique: fonctionnement automatique. ● Panier de 500 x 500 mm. ● Hauteur de passage: 330 mm. ● 3...
Open the catalog to page 14L'EXCELLENCE AU SERVICE DU LAVAGE DE LA VAISSELLE
Open the catalog to page 15EXCELLENCE AT THE SERVICE OF WARE WASHING RANGE · GAMME ::SUPRA:: PASS THROUGH DISHWASHERS │ LAVE-VAISSELLE À CAPOT ● Double skinned hood. ● Electronic control panel: automatic operation. ● 500 x 500 mm. basket. ● Usable height: 400 mm. basket. ● 3 washing cycles: 60”/120”/180”. ● S-100: · Wash tank heating: 2.5 kW. · Boiler heating: 7.5 kW. ● S-120: · Wash tank heating: 3 kW. · Boiler heating: 9 kW. ● Wash and rinse temperature display. ● Options: · Drain pump. · Booster pump. · Constant rinse temperature system with booster pump and "break tank". · Steam condensing unit with heat recovery...
Open the catalog to page 16All Sammic catalogs and technical brochures
-
COMBI CK-45V
2 Pages
-
CUTLERY DRYER SAM-3001
2 Pages
-
DISHWASHER AX-50
2 Pages
-
GLASSWASHER GP-35
2 Pages
-
GLASSWASHER AX-40
2 Pages
-
Sammic General Catalogue 2022
252 Pages
-
AX-UX glass- and dishwashers
56 Pages
-
SRC Rack Conveyor Dishwashers
28 Pages
-
Sammic Equipment Guides
32 Pages
-
Immersion blender XM-12
22 Pages
-
Salad Dryers
8 Pages
Archived catalogs
-
COMBI CK-38V
2 Pages
-
COMBI CK-35V
2 Pages
-
X TRA
20 Pages
-
GLASSWASHER P-35
2 Pages
-
Vacuum packers - Sensor Line
20 Pages
-
SRC rack conveyor diswasher
28 Pages
-
SmartVide 8 Plus, 8, 6, 4
12 Pages
-
BLAST CHILLER AB-3 2/3
1 Pages
-
VACUUM SEALER SV-43
1 Pages
-
VACUUM SEALER SV-33
1 Pages
-
HOSE REELS
1 Pages
-
2 TAP SPRAY UNITS
1 Pages
-
1 TAP SPRAY UNITS
1 Pages
-
DIRECT SPRAY UNITS
1 Pages
-
FAUCETS
1 Pages
-
FRAMES FOR DISHWASHERS
1 Pages
-
SINK UNITS: WORKTOPS
1 Pages
-
CUTLERY DRYER SAS-5001
2 Pages
-
CUTLERY DRYER SAM-3001
2 Pages
-
SUPRA line dishwashers
20 Pages
-
PRO line dishwashers
16 Pages
-
X-TRA line dishwashers
20 Pages
-
POTATO PEELER PP-6+ / PPC-6+
2 Pages
-
Freestanding hand washbasin
1 Pages
-
Tabletop bain-marie
1 Pages
-
Bain-marie with trolley
1 Pages
-
Knife steriliser EC-30
1 Pages
-
Knife steriliser EC-60
1 Pages
-
Transport trolleys
1 Pages
-
GN standard containers
1 Pages
-
GN perforated containers
1 Pages
-
Standard lids
1 Pages
-
Lids with opening for spoon
1 Pages
-
Lids with hermetic seal
1 Pages
-
Perforated false bottoms
1 Pages
-
Trays
1 Pages
-
Grids
1 Pages
-
Dividing bars
1 Pages
-
UTENSIL WASHER LU-130
1 Pages
-
UTENSIL WASHER LU-61H
2 Pages
-
UTENSIL WASHER LU-75
1 Pages
-
UTENSIL WASHER LU-60
1 Pages
-
Equipment Guides
28 Pages
-
Trolleys with guides
1 Pages
-
LU-61H
1 Pages
-
LU-60
1 Pages
-
SRC-5000
2 Pages
-
SRC-4000
2 Pages
-
SRC-3600
2 Pages
-
SRC-3300
2 Pages
-
SRC-2700
2 Pages
-
SRC-1800
2 Pages
-
Commercial Slicer GC-220
1 Pages
-
Potato Chipping Machine CF-5
1 Pages
-
Salad Spinner ES-100
1 Pages
-
Planetary mixer BM-5
1 Pages
-
Hand blender TR-200
1 Pages
-
SK-3
1 Pages
-
CK-5
1 Pages
-
CA-301 VV
1 Pages
-
Coffee machine NOVO
1 Pages
-
Coffee machine MATIC 2
1 Pages
-
Coffee machine MONDO TWIN
1 Pages
-
Coffee machine MATIC TWIN
1 Pages
-
Coffee machine ISO
1 Pages
-
Coffee machine TH/THa
1 Pages
-
Coffee machine B-5
1 Pages
-
Coffe machine B-10
1 Pages
-
Coffee machine B-20
1 Pages
-
Coffee machine B-40
1 Pages
-
Coffe machine B-10 I/D
1 Pages
-
Coffee machine B-5 I/D
1 Pages
-
Coffee machine B-20 I/D
1 Pages
-
Coffee machine B-40 I/D
1 Pages
-
Manual water softeners
1 Pages
-
Electric hot plate
1 Pages
-
Containers
1 Pages
-
Cups and mugs heater WHK
1 Pages
-
Automatic water softeners
1 Pages
-
NX25A
1 Pages
-
SL-650C
1 Pages
-
X-TRA
20 Pages
-
Pro
16 Pages
-
Utensil washer SU-600
1 Pages
-
Dishwasher SL-1200
1 Pages
-
Dishwasher SL-1100
1 Pages
-
Dishwasher SL-900
1 Pages
-
Dishwasher SL-290
1 Pages
-
Dishwasher SL-23
1 Pages
-
Glasswasher SL-19
1 Pages
-
ps2_500_80350
1 Pages
-
Food preparation
28 Pages
-
Snack bars/pizzeria
20 Pages
-
Dynamic Preparation
28 Pages
-
Ware Washing
12 Pages