Waste bin systems - Pull-out units
1 / 24Pages

Waste bin systems - Pull-out units

Waste bin systems Available in a range of sizes, the waste bin systems provide an aesthetically attractive and extremely effective solution to an essential kitchen function - the efficient handling of waste. Both the Lineabox drawer and the waste bins are supplied in preassembled kits. Their assembly is easy, rapid and intuitive. This operation is tool free. The sliding movement of the drawer is fluid and progressive, thanks to Shelf full-extension runners, premounted on a specially-designed frame. Single packing STORAGE UNIT WIDTH PART NUMBER Storage unit width 450 mm Storage unit width...

Waste bin systems - Storage unit 450 mm Kit consists of: - 2 Shelf runners 65559, 500 mm length, premounted on a steel support - Screws for wooden frontal ø 4 x 35 mm - Fully assembled Lineabox drawer - Steel bin-holder frame - 2 plastic waste bins - capacity 24 litres Technical features: - Depth adjustment with the runner fixing clips - Sideways, vertical and tilt adjustment on the runners support Finishes: - Bin-holder frame: Titanium - Waste bins: Charcoal - Runners support: Grey - Lineabox sides: Stainless steel, Champagne, Titanium, White Dimensions with Shelf full-extension runners

Waste bin systems - Storage unit 600 mm Kit consists of: - 2 Shelf runners 65559, 500 mm length, premounted on a steel support - Screws for wooden frontal ø 4 x 35 mm - Fully assembled Lineabox drawer - Steel bin-holder frame - 2 plastic waste bins - capacity 18 litres, 1 waste bin - capacity 12 litres - 1 plastic glove box Technical features: - Depth adjustment with the runner fixing clips - Sideways, vertical and tilt adjustment on the runners support Finishes: - Bin-holder frame: Titanium - Waste bins: Charcoal - Plastic glove box: Charcoal - Runners support: Grey - Lineabox sides:...

Waste bin systems - Storage unit 900 mm Kit consists of: - 3 Shelf runners 65559, 500 mm length, premounted on a steel support - Screws for wooden frontal ø 4 x 35 mm - Fully assembled Lineabox drawer - Steel bin-holder frame - 3 plastic waste bins - capacity 18 litres, 1 waste bin - capacity 12 litres - 2 plastic glove boxes Technical features: - Depth adjustment with the runner fixing clips - Sideways, vertical and tilt adjustment on the runners support Finishes: - Bin-holder frame: Titanium - Waste bins: Charcoal - Plastic glove boxes: Charcoal - Runners support: Grey - Lineabox sides:...

Waste bin systems - Storage unit 1200 mm Kit consists of: - 3 Shelf runners 65559, 500 mm length, premounted on a steel support - Screws for wooden frontal ø 4 x 35 mm - Fully assembled Lineabox drawer - Steel bin-holder frame - 4 plastic waste bins - capacity 18 litres, 1 waste bin - capacity 12 litres - 5 plastic glove boxes Technical features: - Depth adjustment with the runner fixing clips - Sideways, vertical and tilt adjustment on the runners support Finishes: - Bin-holder frame: Titanium - Waste bins: Charcoal - Plastic glove boxes: Charcoal - Runners support: Grey - Lineabox sides:...

Waste bin systems - Assembly features Place the runner support on the bottom of the cabinet. Position the runner support at the centre of the cabinet, using the front reference. The front feet, aligned with the base panel of the cabinet, can be used as a reference for the depth positioning. Screw-fix the feet with the screws provided (ø 4 x 18 mm). Pre-drill the drawer frontal using the template provided. For the correct positioning use as reference the middle of the front panel and its overlay (D) on the base panel of the cabinet.

Using the pre-drilled holes, fix the drawer to the drawer frontal using the screws provided (ø 4 x 35 mm). Slide the drawer onto the runners until the clips engage. Insert the bin-holder frame. Insert the waste bins.

Waste bin systems - Adjustments A technologically advance and comprehensive adjustment system enables the drawer frontal to be aligned precisely in all directions. The amount of adjustment far exceeds what is available elsewhere. All operations can be carried out with a drawer already installed. Sideways tilt adjustment (+8 mm) Operate on the adjusters on the right or on the left for the sideways tilt adjustment of the front panel.

Vertical adjustment (+8 mm) Operate on all adjusters for the vertical adjustment of the front panel.

Waste bin systems - Adjustments Depth tilt adjustment (±2°) Operate on the front or the rear adjusters for the depth tilt adjustment of the front panel. Depth adjustment - 3 way adjustable clip (±2 mm) Rotate the black wheel towards the inside or the outside of the drawer to increase or to reduce the gap between the front and the side. The clip shows the position 0. This operation is tool free.

Sideways adjustment (±6 mm) Loosen the indicated screws for the sideways adjustment of the front panel. Finally the fixing screws must be retightened.

Waste bin systems - Accessories SCCX83H9 Cover cap with embossed logo Cover cap with silk-screen printed logo Reinforcing supports for the bottom of the drawer

Waste bin systems - Lineabox finishes White Stainless steel

Pull-out units Pull-out units for the internal organization of kitchen storage units and wall cabinets. Completely preassembled, easy and intuitive to mount, they transform even the smallest spaces into useful containers for bottles and spice jars. Single packing CABINET WIDTH PART NUMBER 1 single kit (runners on right side) 1 single kit (runners on left side) 1 single kit (runners on right side) 1 single kit (runners on left side) Part number composition (example): Cabinet width

Pull-out units - Storage unit and wall cabinet 150 mm Kit consists of: - 2 Futura runners 6555, full-extension, 500 mm length, to be fixed to the right side or the leftside of the cabinet - Screws for wooden frontal ø 4 x 35 mm - 2 fully assembled Lineabox drawers, premounted on a frame Technical features: - Depth, vertical and sideways adjustment with the runner fixing clips - For cabinets with side thickness min. 15 mm max. 19 mm Accessories: - Central drawer, 350 mm length Finishes: - Lineabox sides: Stainless steel, Champagne, Titanium, White Dimensions with Futura full-extension runners