Universal hinges
20Pages

Universal hinges

Universal hinges The Salice universal hinge has been developed to provide a solution to most applications in the field of furniture doors. The hinge can be used with a very wide range of door materials and thicknesses: in addition to the classic cup for wooden doors, there is a plate-fixed version that is bonded to glass doors or mirrors and a third version with a screw-fixed plate for doors made of the special and thinner materials that are becoming increasingly popular, such as metal, ceramics, cements, quartz composites, HPL, HDF and MDF. These plates are equipped with screws that have...

Universal hinges Technical features No drilling of the glass is required. Bright nickel plated die-cast cup and arm. Salice Universal (CBG) hinges have been developed for use on glass doors and mirrors. Salice will accept no responsibility for any problems associated with the type of adhesive or method of application when used in conjunction with Universal hinges, nor for any consequences of the incorrect mounting of the door. It is recommended that the selected adhesive is subjected to prior testing. The adhesive may be considered appropriate if the plate, when fixed to the glass, can...

Technical information Hinges for glass doors. No drilling of the glass is required. Possible fixing inset distance on the door (K): from 0 to 22 mm. 110° opening. To limit the opening of the hinge, see page 17 chapter “Accessories”. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on monting plates. CBG2AE9 = with integrated soft-close CBG2AC9 = sprung hinge CBGQAC9 = with Push opening CBG1AC9 = unsprung hinge Packing Boxes 150 pcs. Pallets 3.600 pcs. 1) The hinge plate must be attached to the glass door with a specific adhesive using the correct procedure....

Universal hinges Technical features Hinges for doors with a minimum thickness of 8 mm made with special materials. Bright nickel plated die-cast cup and arm. for doors with a min. thickness of 8 mm Salice Universal (CBY) hinges have been developed for use on doors with a min. thickness of 8 mm. The hinges must be fixed, if possible, with the screws included in the packaging. For special materials, we suggest to contact our technical Assistance Service. Salice will accept no responsibility for any problems associated with the use of screws different from those included or for any...

Technical information Hinges for doors with a minimum thickness of 8 mm made with special materials. Possible fixing inset distance on the door (K): from 0 to 22 mm. 110° opening. To limit the opening of the hinge, see page 17 chapter “Accessories”. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on monting plates. CBY2AE9 = with integrated soft-close CBY2AC9 = sprung hinge CBYQAC9 = with Push opening CBY1AC9 = unsprung hinge Packing Boxes 150 pcs. Pallets 3.600 pcs 1) The hinge plate must be fixed to the door with the included screws. 32 2) Locate the...

Universal hinges Technical features Universal hinges can provide a solution to a number of special applications, which include half-inset doors and doors with moulded profiles. Bright nickel plated die-cast cup and arm. Constant “L” value of 0.7 mm (it does not change during side adjustment). Approx. number of hinges required according to the door dimension and weight. Mounting plates Compensated side adjustment from -1.5 mm to +4.5 mm. Height adjustment ±2 mm. Depth adjustment with Series 200 mounting plates +2.8 mm. Depth adjustment with Domi snap-on mounting plates from -0.5 mm to +2.8...

Wood screw Use this table to identify the available drillings and fixings. Fill the third position of the hinge code number with the letter or the number corresponding to your choice. I.e.: CB_2AC9. Fill this position with the chosen letter or number.

Universal hinges - For wooden doors - 110° opening Technical information These hinges can provide a solution to a number of special applications, which include half-inset doors and doors with moulded profiles. 9 mm deep metal cup. 110° opening. To limit the opening of the hinge, see page 17 chapter “Accessories”. Possible drilling distance on the door (K): from 3 to 18 mm. Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates. Space needed to open the door T= The above values are calculated on the assumption that the doors have square edges....

Packing Boxes 150 pcs. Pallets 3.600 pcs. Use these formulas to determine the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. CB_2AE9 = with integrated soft-close CB_2AC9 = sprung hinge CB_QAC9 = with Push opening CB_1AC9 = unsprung hinge Drillings and fittings at page 9

Universal hinges - Applications Glass doors Full overlay door Inset door Doors with a minimum thickness of 8 mm made with special materials Full overlay door 20 H=0 Inset door Wooden doors Full overlay door Inset door

Wooden doors - Special assemblies

Universal hinges - Accessories Hinge arm cover caps. Symmetrical steel hinge arm cover cap, it can be personalised on request. Symmetrical steel hinge arm cover cap with embossed logo. Plastic flange cover cap. Available colours: SBXX85A9 = Nickel plated SBXX85A6 = Titanium Stop device. It limits the opening angle to 90°.

Disassembly and assembly instructions Disassembly of the Smove. It is possible to convert the hinges with integrated soft-close into sprung hinges by replacing the Smove with the cover. Lift the Smove using a flat-blade screwdriver. Remove the Smove from the hinge arm. Insert the cover frontally. Press lightly on the back to fix in position. It is possible to convert the sprung hinges into hinges with integrated soft-close by replacing the cover with the Smove. Lift the cover using a flat-blade screwdriver. Insert the Smove frontally. Press lightly on the back to fix in position.