Smove
28Pages

Adapters to be screw fixed to the cabinet Adapters with double sided adhesive system

Smove is the innovative system used to soften the closing action of any door. It can be installed to all cabinet applications and offers optimal performance.

We suggest that one Smoveholder only is used for each door, by selecting one of the three available models: D0S7SNG to be used with doors made with particularly light materials. D0S8SNG to be used with doors with two hinges. D0S9SNG to be used with doors with more than two hinges. Packing Boxes 300 pcs Pallets 7.200 pcs Adapter for hinges with arm 0 Adapter to be used ONLY with cruciform mounting plates 37x 32 mm. For use with mounting plates to be fixed with wood screw, please use a screw with screwhead ø 8 mm and length 16 mm. D2VX09 - for steel mounting plates DARX09 - for die-cast...

Smove - D0S_SNG - Choice of the adapter Smove works by bearing against the flange of the hinge cup and for this reason it is necessary to choose the appropriate adapter. By reducing the door overlay, it is necessary consequently to increase the height of the adapter. For mounting plates H = from 0 mm to 4 mm For mounting plates H = from 0 mm to 6 mm For mounting plates H = from 0 mm to 4 mm For mounting plates H = from 0 mm to 4 mm For mounting plates H = from 0 mm to 6 mm For mounting plates H = from 0 mm to 4 mm For mounting plates H = from 0 mm to 6 mm

The required overlay can be achieved not only by using the appropriate hinge arm, but also by using mounting plates of different heights. Application examples: For mounting plates H = from 0 mm to 3 mm Arm 0 For mounting plates H = from 6 mm to 9 mm For mounting plates H = from 0 mm to 3 mm For mounting plates H = from 0 mm to 4 mm Arm 0 For mounting plates H = from 9 mm to 12 mm

Smove - D0S_SNG - Assembly instructions 1 - Loosen one of the two fixing screws of the mounting plate. 2 - Insert the adapter for the Smoveholder. 3 - Retighten the fixing screw of the mounting plate. 4 - Apply the Smoveholder to the adapter, as indicated. 5 - Finally it is possible to adjust the Smove to increase or reduce the decelerating effect. Positive adjustment Negative adjustment Rotating the screw towards the + sign, thus moving the Smove forward, the decelerating effect increases. Rotating the screw towards the - sign, thus moving the Smove backwards, the decelerating effect...

D0L_SNG - Smoveholder with assembly stop devices We suggest that one smoveholder only is used for each door, by selecting one of the three available models: D0L7SNG to be used with doors made with particularly light materials. D0L8SNG to be used with doors with two hinges. D0L9SNG to be used with doors with more than two hinges. Packing Boxes 150 pcs Pallets 13.500 pcs D0L_SNGR - Smoveholder without assembly stop devices We suggest that one smoveholder only is used for each door, by selecting one of the three available models: D0L7SNGR to be used with doors made with particularly light...

- Assembly instructions Smoveholder application Frontal positioning: with assembly stop devices. Side positioning: place the smoveholder with its wing in contact with the side of the cabinet. 1 - Place the smoveholder in position on the top or bottom panel with its wing in contact with the side of the cabinet. Frontal positioning: drilling value at + 11 mm plus the door thickness. Side positioning: place the smoveholder with its centreline approx. 5 mm from the edge of the door at its fully open position. 2 - Screw the smoveholder into position. 3 - Finally it is possible to adjust the...

Smove - DB01SN_ - Assembly instructions 1 - Apply Smove to the hinge arm

Packing Boxes 250 pcs. Cartons 2.000 pcs. Packing Boxes 250 pcs. Cartons 2.000 pcs. Technical information about the installation of SMOVE D005SN to be recessed Insert Smove D005 into the cabinet side opposite the hinges. For an optimal performance, we suggest that Smove D005 is positioned at the centre of the side panel. It is suggested for doors from 450 mm to 600 mm width. For wood-based and alu-framed doors over 1600 mm height, it may be necessary to use two Smove, one to be inserted into the upper part and the second into the lower part of the cabinet side opposite the hinges.

Packing Boxes 250 pcs. Cartons 2.000 pcs. Packing Boxes 250 pcs. Cartons 2.000 pcs. Technical information about the installation of SMOVE D006SN to be recessed Insert Smove D006 at the centre of the top or the base panel of the cabinet. For wood-based and alu-framed doors over 1600 mm height, it may be necessary to use two Smove, one to be inserted into the top and the second into the base panel of the cabinet.

Packing Boxes 250 pcs. Cartons 2.000 pcs. Packing Boxes 250 pcs. Cartons 2.000 pcs. Technical information about the installation of SMOVE D008SN to be recessed Insert Smove D008 into the top or the base panel of the cabinet on the hinged side. A drilling distance of 27 mm from the cabinet side is suggested. For doors over 1600 mm height, it may be necessary to use two Smove, one to be inserted into the top and the second into the base panel of the cabinet.

Packing Boxes 250 pcs. Cartons 2.000 pcs. Packing Boxes 250 pcs. Cartons 2.000 pcs. Technical information about the installation of SMOVE D009SN to be recessed Insert Smove D009 into the base panel of the cabinet on the hinged side. Smove D009 is used for doors between 720 mm and 1600 mm high. Drilling distance from the cabinet side: - for hinges with arm 0 mm the drilling distance equals 15 mm plus the base height; - for hinges with arm 5 mm the drilling distance equals 20 mm plus the base height; - for hinges with arm 9 mm the drilling distance equals 24 mm plus the base height.

Packing Boxes 250 pcs. Cartons 2.000 pcs. Packing Boxes 250 pcs. Cartons 2.000 pcs. Technical information about the installation of SMOVE D010SN to be recessed Insert Smove D010 into the base panel of the cabinet on the hinged side. Smove D010 is used for doors over 1600 mm high. Drilling distance from the cabinet side: - for hinges with arm 0 mm the drilling distance equals 15 mm plus the base height; - for hinges with arm 5 mm the drilling distance equals 20 mm plus the base height; - for hinges with arm 9 mm the drilling distance equals 24 mm plus the base height.