Sliding system for concertina doors Sliding system for concertina doors

Sliding system for concertina doors - Technical features The Salice system for concertina doors has been designed to open both doors on one side only, giving good access to the interior of the cabinet.  Space taken up by the door in the maximum open position is reduced to a minimum (approximately 80 mm). A nylon strip is available in order to prevent insertion of objects or fingers between doors. This also makes the system dustproof. To ensure that the door closes fully and securely, particularly when there is some curvature of the door, a locating device is available

Hinge for sliding block Central hinge Hinge for the Practical system of aluminium-framed doors Long sliding block For aluminium-framed doors Central hinge for the Practical system of aluminium-framed doors. Adhesive finger-protection strip F1SBAY neutro Sliding block Locating device for door

Sliding system for concertina doors Calibrated height adjustment Height adjustment of hinges assembled with the sliding components is achieved through a cam. Through this alignment a parallel movement of the component in the track is achieved. The result is a smooth movement without any binding. ATTENTION! The sliding block does not have a load-bearing function. Therefore it must slide freely inside the track. Depth adjustment Depth adjustment of the hinges mounted on the sliding component is achieved through the fixing screw of the same hinge. Depth adjustment should be made in conjunction with...

Standard lengths available: 590 mm, 880 mm, 1180 mm. Non-standard lengths can be supplied subject to a minimum order quantity of 900 pieces. The required length should be expressed in millimetres in the last four digits of the product code occupied by the dashes. Mount the hinges of the fixed door on to the mounting plates on the cabinet side.  We recommend the use of Salice hinge part number C2A6A99 110° with BAR3R mounting plate or similar. Position the sliding block inside the track by rotating it 90°.

Sliding system for concertina doors - Assembly instructions Application into the top of the cabinet and doors Solution with plastic track barb-fixed or screw-fixed Drilling distances without finger-protection strip To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges. Central assembly: - narrow part to be mounted on the door which is fixed to the cabinet side; - wider part to be mounted on the moving door. Drilling distances with finger-protection strip To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges....

Application into the top of the cabinet and doors. Solution with plastic track barb-fixed or screw-fixed. Glass doors with aluminium-frame Drilling distances without finger-protection strip and with long sliding block To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges. Central assembly: - narrow part to be mounted on the door which is fixed to the cabinet side; - wider part to be mounted on the moving door. Glass doors with aluminium frame Drilling distances with finger-protection strip and long sliding block To facilitate the assembly of the doors...

Sliding system for concertina doors - Assembly instructions Application into the top of the cabinet and doors Solution with barb-fix and screw-fix plastic track Glass doors with the Practical system of aluminium-framed doors Distance to be used when finger-protection strip and two-screw (D206BS5) or four-screw (D206BS5L) corner joint are used To facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges. Central assembly: - narrow part to be mounted on the door which is fixed to the cabinet side; - wider part to be mounted on the moving door. Glass doors...

Packaging and code number Packaging (standard packaging) E lements of th e system Boxes Pallets Code number composition (example)