Single pivot hinge 270° opening

Single pivot hinge Single pivot hinges. 270° opening angle. Bright nickel plated die-cast cup and arm. Sprung hinge (with spring). Ideal for the most critical applications, where high stability, strength and endurance are required. They are certified for applications in public environments in conformity with FIRA Level 5 and ANSI Grade 1 requirements. Adjustments. Compensating side adjustment from -3 mm to +3 mm. With mounting plates H=0 the negative side adjustment cannot be used. Height adjustment ±2 mm. Depth adjustment with Series 200 mounting plates +2,8 mm. Depth adjustment with Domi snap-on...

Packing Boxes 100 pcs. Pallets 2400 pcs. Use the tables “Drillings and fixings” at page 2 to complete the code number of the desired hinge. Use these formulas to determine the height of the mounting plate “H” which is necessary to solve each application problem. Recessed knuckle H = 18 - D Chart to verify that full 270° opening is possible. Full 270° opening is possible only with R value ≥0 and mounting plates H=0 mm. Otherwise the actual opening must be checked with a practical test. Door thickness T 180° opening with door thickness max. 24 mm.

Single pivot hinge - 270° opening Application with inset door Application with half overlay door

ARTURO SALICE S.p.A. VIA PROVINCIALE NOVEDRATESE, 10 22060 NOVEDRATE (COMO) ITALIA TEL. 031 790424 FAX 031 791508 [email protected] www.salice.com DEUTSCHE SALICE GMBH RUDOLF DIESEL STR. 10 POSTFACH 1154 74382 NECKARWESTHEIM TEL. 07233 9807-0 FAX. 07233 9807-16 [email protected] www.deutschesalice.de DEUTSCHE SALICE GMBH VERKAUFSBURO NORD RINGSTRASSE 36/A30 CENTER 32584 LOHNE TEL. 05731 15608-0 FAX. 05731 15608-10 [email protected] www.deutschesalice.de SALICE FRANCE S.A.R.L. ROUTE DE GOA ZAC LES 3 MOULINS 06600 ANTIBES TEL. 0493 330069 FAX. 0493 330141 [email protected]...