Pacta - Technical pamphlet
24Pages

PACTA Pacta is a compact hinge for fall flaps which operates without the need for additional stays or cables. Pacta confers a decelerated opening action and the fall of the door is gradual and controlled. In the fully-open position, the door and base panel are aligned, creating a uniform and flat surface. Available with Push self-opening system, Pacta comes in a variety of finishes. Its applications are numerous: in living room and kitchen cabinets, to create desks in children’s furniture or for writing surfaces and table extensions in hotel furniture.

PACTA Technical information Hinge for flap doors with decelerated opening. Sprung closing action. Fixing to the base of the cabinet with longitudinal snap-on mounting plate (BAPGR29/16). Standard drilling of the door ø 35. 13 mm deep cup. 90° opening. Fixed K = 4.5 mm. Pacta is tested and certified to level 3 of UNI EN 15828:2010 Drilling patterns Internal cabinet side Additional hole for wood screw Central line of the cabinet Space needed to open the door

Technical information Hinge for flap doors with decelerated opening. Push opening. Fixing to the base of the cabinet with longitudinal snap-on mounting plate (BAPGR29/16). Standard drilling of the door ø 35. 13 mm deep cup. 90° opening. Fixed K = 4.5 mm. Pacta is tested and certified to level 3 of UNI EN 15828:2010 Drilling patterns Magnetic Push Internal cabinet side 19 min 17 Holes ø5 x 13 Additional hole for wood screw Central line of the cabinet Space needed to open the door

Assembly instructions Fixing the mounting plate to the cabinet Fixing the hinge to the door Mounting the door onto the cabinet Clip the hinge arm onto the mounting plates. This operation is tool free.

Sideways adjustment - 1.5 mm + 1.5 mm Height adjustment - 1.5 mm + 1.5 mm Installing the Smove Clip the narrow end of the Smove into position. This operation is tool free.

Assembly instructions Lift the flap slightly and clip the other end of the Smove into position. This operation is tool free. Installing the cover Firstly install the cover on the hinge arm and then to the cup.

Assembly instructions for the central hinge Application of the central hinge We suggest that you use the central hinge for cabinets over 900 mm width. Install the cover cap onto the hinge according to the drawing and then screw -fix the hinge to the cabinet. DOOR side After fixing the hinge, make any adjustments required Install the cover cap onto the hinge on the cabinet side Depth adjustment Height adjustment Overall view of the mounted system

Disassembly instructions Disassembly of the Smove Lift the flap sightly and unclip the back of the Smove using a screwdriver. Remove the other end of the Smove.

Remove the security screw Unfasten the hinge from the mounting plate with a screwdriver

Stainless steel SRXB78ANXXXX_ Glossy metal black Glossy white Satin metal black

Colours of the cover cap for the central hinge FRCK59RXXX1 Stainless steel Glossy white Satin metal black FRCK59RXXXN Glossy metal black

INDUSTRIAL PACKING PART NUMBER SPRUNG CLOSING ACTION PUSH OPENING 18 hinges • 18 mounting plates • Fixing screws included SMOVE INDUSTRIAL PACKING PART NUMBER 1 carton contains: 24 cartons 18 pcs. SMOVE DECELERATING STRENGTH COVER INDUSTRIAL PACKING PART NUMBER 1 carton contains: 24 cartons 18 cover

DOOR-SET PACKING PART NUMBER SPRUNG CLOSING ACTION FRBKFEX_SN9 1 carton contains: SMOVE DECELERATING STRENGTH PUSH OPENING 2 hinges • 2 mounting plates • Fixing screws and Smove included COVER DOOR-SET PACKING SMOVE DECELERATING STRENGTH PART NUMBER 1 carton contains: 180 cartons 2 covers CENTRAL HINGE PART NUMBER 45 hinges 45 cover caps for door 45 cover caps for cabinet • Fixing screws included Suggested for cabinets over 900 mm width

Charts to determine which Smove is to be used for a particular door size and weight. We recommend that all applications are verified by a practical trial. With particularly light doors, it may be sufficient to use only one Smove

Magnetic Push

Magnetic Push DPMSNB - beige - Recessed magnetic release device and retaining catches Magnetic catch ø 10 mm, 40 mm length. Packing Boxes 250 pcs. Cartons 1.500 pcs. Optional supplementary magnetic catch to increase the holding strength. It must always be used together with the DPM. The suggested position of the DPM is the point of pressure on the door. The DPA can be positioned at any point along the opening edge of the door. ø 10 mm, 40 mm length. Packing Boxes 250 pcs. Cartons 1.500 pcs. Adjustable magnetic retaining catch. ø16.6 mm Pin-fix striker for magnetic catches. ø 11.5 mm....

Release device application Application of the standard magnetic catch ø10 Drill a hole Ø 10 mm and min. 40 mm depth in the top, the side or the base panel of the cabinet. Insert the release device into the hole. Inserted adjustable magnetic catch ø 10 The retaining catch DP39 is itself magnetic and together with the magnetism of the release device DPM considerably increase (30%) the holding strength of the door against the cabinet side, thus avoiding accidental openings. For the installation it is necessary to drill a hole ø15 mm and 11 mm depth in the door. Depth adjustment from -0.5 mm to...

ARTURO SALICE S.p.A. VIA PROVINCIALE NOVEDRATESE, 10 22060 NOVEDRATE (COMO) ITALIA TEL. 031 790424 - FAX 031 791508 info.salice@salice.com - www.salice.com DEUTSCHE SALICE GMBH RUDOLF DIESEL STR. 10 POSTFACH 1154 74382 NECKARWESTHEIM TEL. 07233 9807-0 FAX. 07233 9807-16 info.salice@deutschesalice.de www.salice.com DEUTSCHE SALICE GMBH VERKAUFSBÜRO NORD RINGSTRASSE 36/A30 CENTER 32584 LÖHNE TEL. 05731 15608-0 FAX. 05731 15608-10 vknord@deutschesalice.de www.salice.com ROUTE DE GOA ZAC LES 3 MOULINS 06600 ANTIBES TEL. 0493 330069 FAX. 0493 330141 info.salice@salicefrance.com www.salice.com...