Catalog excerpts
Index Lapis for thicker doors - 94° opening Lapis with Push system - 94° opening Cerniera tipo 700 - Collo 9 - Base 0 Cerniera tipo 700 - Collo 0 - Base 0 Hinge overall dimensions and size Assembly and disassembly instructions
Open the catalog to page 3- Series 200 for thicker doors - 94° opening Technical information Silentia hinges with cup integrated decelerating system and cover. Hinges for min. 18 mm thick doors. 15.5 mm deep cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Adaptable only with longitudinal Domi snap-on mounting plates (BAP). Space needed to open the door T= K=3 The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. Projection of the door from the cabinet side at the max. opening. The figures are based on a...
Open the catalog to page 4Packing Boxes 300 pcs. Pallets 7.200 pcs. Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Arm 0 H= 15 + K - (D)
Open the catalog to page 5Technical information Silentia hinges with cup integrated decelerating system and cover. Hinges for min. 16 mm thick doors. 13.5 mm deep cup. 110° opening. Possible drilling distance on the door (K): from 3 to 6 mm. Adaptable only with longitudinal Domi snap-on mounting plates (BAP). Space needed to open the door T= The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. Projection of the door from the cabinet side at the max. opening. The figures are based on a straight arm hinge, H=0 mm thickness of mounting...
Open the catalog to page 6Packing Boxes 300 pcs. Pallets 7.200 pcs. Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Arm 0 H= 15 + K - (D)
Open the catalog to page 7Lapis - Push - Series 200 hinges - For thicker doors - 94° opening Technical information Push hinges are equipped with a special spring that acts to open the door independently of the release device. For thick doors up to 35 mm, with special profiles. 15.5 mm deep metal cup. 94° opening. Possible drilling distance on the door (K): from 3 to 9 mm. Adaptable only with longitudinal Domi snap-on mounting plates (BAP). Space needed to open the door The above values are calculated on the assumption that the doors have square edges. They are reduced if the doors have radiussed edges. Projection of...
Open the catalog to page 8Packing Boxes 300 pcs. Pallets 7.200 pcs. Use these formulas to determine the type of hinge arm, the drilling distance “K” and the height of the mounting plate “H” which is necessary to solve each application problem. Arm 0 H= 15 + K - (D) For the complete range of release devices and retaining catches consult Salice general catalogue.
Open the catalog to page 9Domi snap-on mounting plates Packing Boxes 300 pcs. Pallets 7.200 pcs. - 21+32 mm drilling. - Depth and height adjustment by cam. Die-cast mounting plates. Fixing: wood screw. Die-cast mounting plates. Fixing: Euroscrew. Drilling ø5x11. Die-cast mounting plates. Fixing: expanding dowel. Drilling ø10x11.5 mm. H= 0 1 2 3 4 5 6 Die-cast mounting plates. Fixing: knock-in dowel. Drilling ø10x11.5 mm. H= 0 1 2 3 4 5 6 Use mounting plates with 6 mm maximum height
Open the catalog to page 10Cerniera tipo 700 - Collo 0 - Base 0 - K=4 Technical information - overall dimensions Cerniera tipo 700 - Collo 0 - Base 0 - K=4 Cerniera tipo 700 - Collo 0 - Base 0 - K=4 Cerniera tipo 700 - Collo 0 - Base 0 - K=4 Lapis hinge - 0 arm - 0 mounting plate Cerniera tipo 700 - Collo 9 - Base 0 - K=4 Cerniera tipo 700 - Collo 9 - Base 0 - K=4 Lapis hinge - 9 arm - 0 mounting plate Cerniera tipo 700 - Collo 9 - Base 0 - K=4 Cerniera tipo 700 - Collo 9 - Base 0 - K=4
Open the catalog to page 11Assembly instructions Attached skirt. After fixing the mounting plate, attach the skirt. Clip the hinge onto the mounting plate. ATTACHMENT OF THE HINGE ARM COVER Clip the cover onto the hinge arm. Press to clip the cover.
Open the catalog to page 12Assembly instructions ATTACHMENT OF THE DOOR SIDE COVER Lift the carrier. Clip the cover onto the carrier. Half-close the door to ensure that the covers are engaged correctly.
Open the catalog to page 13Disassembly instructions Half-close the door and lift the cover. Open the door and push the cover firmly in the direction indicated. Remove the cabinet side cover. Unclip the hinge from the mounting plate.
Open the catalog to page 14Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side SATIN CHROME SATIN METAL BLACK SATIN CHROME SATIN METAL BLACK SATIN CHROME SATIN METAL BLACK SATIN GOLD SATIN GOLD SATIN GOLD Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side
Open the catalog to page 15Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side GLOSSY CHROME GLOSSY METAL BLACK STAINLESS STEEL GLOSSY CHROME GLOSSY METAL BLACK STAINLESS STEEL GLOSSY CHROME GLOSSY METAL BLACK STAINLESS STEEL Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side
Open the catalog to page 16Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side GLOSSY GOLD GLOSSY GOLD GLOSSY GOLD Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side MATT WHITE MATT WHITE MATT WHITE Lapis cabinet side - Arm 0 Lapis cabinet side - Arm 9 Lapis door side
Open the catalog to page 17VIA PROVINCIALE NOVEDRATESE, 10 22060 NOVEDRATE (COMO) ITALIA TEL. 031 790424 FAX 031 791508 info.salice@salice.com www.salice.com DEUTSCHE SALICE GMBH DEUTSCHE SALICE GMBH VERKAUFSBÜRO NORD RINGSTRASSE 36/A30 CENTER 32584 LÖHNE TEL. 05731 15608-0 FAX. 05731 15608-10 vknord@deutschesalice.de www.deutschesalice.de 2123 CROWN CENTRE DRIVE CHARLOTTE NC. 28227 TEL. 704 8417810 FAX. 704 8417808 info.salice@saliceamerica.com www.saliceamerica.com CALLE COPÉRNICO, 11 POLÍGONO INDUSTRIAL COLL DE LA MANYA 08403 GRANOLLERS (BARCELONA) TEL. 938 46 88 61 FAX 938 49 11 97 info.salice@saliceespana.es...
Open the catalog to page 20All SALICE catalogs and technical brochures
-
Clipper
34 Pages
-
Slider L
39 Pages
-
Slider S20
25 Pages
-
Slider M35 M50
26 Pages
-
Eclipse
13 Pages
-
Wind Emotion
7 Pages
-
Wind
12 Pages
-
Shelf
12 Pages
-
Lineabox Emotion
31 Pages
-
Lineabox
80 Pages
-
Lapis Emotion
13 Pages
-
Air Emotion
7 Pages
-
Air
12 Pages
-
Vetro
12 Pages
-
Titanium
6 Pages
-
Stabila
12 Pages
-
Hinges and Systems catalogue
360 Pages
-
Runners and Drawers Catalogue
184 Pages