Futura Push synchroniser

Futura Push synchroniser The synchronisation system for Push-open Futura runners has been developed to ensure that drawers of any width can be opened with minimum effort. The system links the two runners, which thus become a single element; a pressure at any point of the drawer frontal (even at the extremities), is sufficient for the Push devices to release and consequently for the drawer to self-open. The synchroniser can be used with any drawer width; its functionality is at its best with wider drawers. It can be used on drawers of any width; however it is recommended for drawers over 80 cm...

Technical information - Formula for cutting the bar to length Part-extension The assembly of the synchroniser requires a minimum 60 mm groove in the rear of the drawer. Full-extension The assembly of the synchroniser requires a minimum 65 mm groove in the rear of the drawer.

Part numberTo be screw fixed Screw TSP 0 3,5 mmFutura Push 61577 BASIC PART NUMBER Part numberTo be screw fixed Screw TSP 0 3,5 mm SAUCE

Part numberTo be screw fixed Screw TSP 0 3,5 mmFutura Push 65577 BASIC PART NUMBER Part numberTo be screw fixed Screw TSP 0 3,5 mm BASIC PART NUMBER

Futura Push synchroniser - Part-extension - Assembly instructions Fitting the driver pins to the runners Slide the carrier plates into position on the runners in the direction indicated by the arrows Screw-fix the runners to the cabinet side

Assembly instructions 1. Press the end caps onto the bar 2. Fix the bar to the plates A pressure at any point on the drawer frontal is sufficient for the drawer to self-open

Futura Push synchroniser - Full-extension - Assembly instructions Fitting the driver pins to the runners Slide the carrier plates into position on the runners in the direction indicated by the arrows Screw-fix the runners to the cabinet side

Assembly instructions 1. Press the end caps onto the bar 2. Fix the bar to the plates A pressure at any point on the drawer frontal is sufficient for the drawer to self-open

INDUSTRIAL PACKING Clip version Box = 20 pcs Pallet = see the table Futura with 1 way adjustable clip. Packing = 100 pairs INDUSTRIAL PACKING Pin version Box = 20 pcs Pallet = see the table FULL EXTENSION

INDUSTRIAL PACKING Part-extension APKIGP51150 Packing = 100 kits Full-extension APKIGT51150 Packing = 100 kits SINGLE PACKING Part-extension APKFGP51150 Box = 20 single kits Full-extension APKFGT51150 Box = 20 single kits

ARTURO SALICE S.p.A. VIA PROVINCIALE NOVEDRATESE, 10 22060 NOVEDRATE (COMO) ITALIA TEL. 031 790424 FAX 031 791508 [email protected] www.salice.com SALICE GUIDE S.p.A. VIA ARISTIDE MERLONI, 11 61036 COLLI AL METAURO (PU) ITALIA TEL. 0721 899800 FAX 0721 897980 [email protected] www.salice.com DEUTSCHE SALICE GMBH RUDOLF DIESEL STR. 10 POSTFACH 1154 74382 NECKARWESTHEIM TEL. 07233 9807-0 FAX. 07233 9807-16 [email protected] www.deutschesalice.de DEUTSCHE SALICE GMBH VERKAUFSBURO NORD RINGSTRASSE 36/A30 CENTER 32584 LOHNE TEL. 05731 15608-0 FAX. 05731 15608-10 [email protected]...