Catalogs >
Saint Gobain Performance Plastics >
SHEERFILL IIA Architectural Membrane

SHEERFILL IIA Architectural Membrane
1Pages

Catalog excerpts

SHEERFILL IIA Architectural Membrane - 1

SHEERFILL® IIA Architectural Membrane Tensile Modulus – Poisson's Ratio Technical Bulletin Two of the most important pieces of information needed in designing a tensile structure are the Tensile Modulus and Poisson's Ratio of the membrane material. There are various methods used to calculate these values. One of the most accepted was developed by the Membrane Structures Association of Japan (MSAJ). The membrane is subjected to biaxial stress at different loadings ratios (warp to fill). Results are then used to calculate the two values. In this bulletin, we have graphic information on the results of the biaxial tests and values for Tensile Modulus and Poisson's Ratio. Actual Value For Material Constants Fabric SHEERFILL IIA Fill 1:2 Fill 1:1 Fill 0:1 SHEERFILL® IIA Architectural Membrane Tensile Modulus (kgf/m) Poisson's Ratio Saint-Gobain Performance Plastics 701 Daniel Webster Highway Merrimack, NH 03054 Tel: +1 603 420 1250 Fax: +1 603 424 9012 sheerfill@saint-gobain.com www.sheerfill.com NOTE: Saint-Gobain Performance Plastics Corporation does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/ or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation. AFF-1771-1213-SGCS ©2013 Saint-Gobain Performance Plastics Corporation

Open the catalog to page 1

SHEERFILL IIA Architectural Membrane 1Pages

Catalog excerpts

All Saint Gobain Performance Plastics catalogs and technical brochures

SHEERFILL IIA Architectural Membrane
1Pages