05/10/2021 ATATE71TAG538 BIOGAN BioZinalium® Pipes with STD joint DN150-200 DN Legend: • DN : nominal diameter • Lu : laying length, in m • e: thickness according to EN598 + A1 - August 2009, in mm • 0DE : external nominal diameter of the barrel according to EN598 + A1 - August 2009, in mm • 0DI : internal nominal diameter of the socket, in mm • P : nominal depth of the socket, in mm • 0B : nominal diameter of the socket, in mm • Mass : total mass per meter (including coating and socket), determined with the nominal thickness, in kg/m • Reference : commercial reference Saint-Gobain PAM • : Marking of the theoretical center of gravity Field of use: • Separate sewer system • Application: gravity flow • Type of effluent: domestic wastewater and rainwater • Ecological with respect to the water table (bisphenol A Free) • Perfectly watertight • For effluents between pH4 and pH11 (pH12 en exceptional) • For the soils with 6 < pH < 9 • Majority of the soils, except the acid peaty and polluted soils • Is appropriate for the clay soils • Resistivity of the soils:

Outside the water table Main characteristics: • External coating BIOZINALIUM: a layer of zinc-aluminium alloy enriched with copper Zn85Al15 (Cu), with surface density of 400 g/m2 covered with a protective red (RAL 3011) layer AQUACOAT 80 ^m (mini average), without VOC and without BPA. • Internal lining: ultramarine blue thermoplastic polymer DUCTAN - thickness 350 microns • BIOGAN pipes are tested in accordance with the requirements of standard EN 598 + A1 - August 2009 • Pipe supplied with pre-assembled BIOGAN ring. Caution! BIOGAN Ring is not sealing ring. • CE Marking • Declaration of performances...

Pipe Cutting and repairing 1. Cutting Cut the pipe with an electric or heat pipe cutting machine, for example. • Irrespective of the cutter used, always fit a diamond disc. • Limit the metal filings and dusts sparks inside the pipe in particular under windy and rainy conditions. Deburr all defects in the cutting edge with a cutter. Immediately clean the inside of the pipe: after cutting, ensure the absence of metal filings and dusts on the lining. If it remains metal filings and dusts but non-through in Ductan lining, it may be seen in the visual inspection but it does not com-promise the lining...

05/10/2021 ATATE71TAG538 2- Chamfering Round off the angle with a file or a grinder. 3- Repair the exposed iron Repair the protective coating on the exposed face and chamfer. Brush to remove any dirt or loose particles. Dry the surfaces to be coated (in case of low temperatures or high humidity, use a gas burner). Apply the protective paste with a paintbrush. Do not let the protective paste dry before assembling the pipe Protective paste replaces the lubricate paste (on the spigot). 4- Internal lining repairs: DUCTAN Internal Lining .nnfftv SAINT-GOBAIN

05/10/2021 ATATE71TAG538 - Deburr the edges of the damaged area with a cutter. - Sand and clean the damaged area. - Apply the Eu-rokote 4820 mixture to the damaged area with a paintbrush .nnfftv SAINT-GOBAIN