PAVEMENT REINFORCEMENT SYSTEM GlasGrid® Rapid SELF-ADHESIVE COMPOSITE REINFORCEMENT FULL-AREA HIGHLY MODIFIED PENETRATIVE ASPHALT MEMBRANE OPTIMIZED PACKAGING

— Reinforce & protect — Skip technological steps of repairs — Reduce the number of staff — Avoid using additonal machinery — Apply extremely adhesive material What do you need to solve? — Cracking & concrete joints & utility trench repair — Time limit for road repair — Staff shortages — Limited place for machinery — Repairs in low and high air temperatures — Warranty repairs

Bridge repair Pavement joints Area-wide repair Localized cracking

Unroll GlasGrid® Rapid — old/new asphalt surfaces — old/new concrete surfaces — milled surfaces — combined milled and flat surfaces

Superior asphalt pavement reinforcement with built-in high modified bitumen self-adhesive layer. Engineered solution to reinforce pavements and dramatically speed up the road reconstruction process by replacing the need for applying a tack coat.* Sand => protection against tyres sticking Grid => reinforcement Bitumen layer => secured bonding of asphalt layers Self-adhesive surface => excellent surface adhesion Film => protection for GlasGrid® Rapid * The amount of bitumen layer included in Rapid is at lower rate than the residual bitumen content of the tack coat used when applying a standard...

You can drive over the grid without any risk of tyres sticking. HOW FAST CAN BE RAPID INSTALLED? 1 palet finished in 1 hour! * Application of 1 palette of Rapid = 440 m2 Calculated for 2 workers on-site Rapid can be used below a wearing course of at least 4 cm. Delivery of Rapid on the construction site SAINT-GOBAIN ADFORS CZ s.r.o. Sokolovská 106 570 01 Litomyšl • The Czech Republic Tel.: +420 461 651 111 [email protected] eu.adfors.com