Technical Data Sheet Fiberglass mesh R117 A101 made from E-glass alkali resistant coating high tensile strength dimensionally stable Product is designed to meet main quality requirements and standard for glassfibre meshes: CE certified since 2013  regularly audited and tested by main European laboratories CSTB, DiBT, TZUS  SAINT-GOBAIN ADFORS CZ Sokolovská 106, 570 01 Litomyšl Tel.: +420 461 651 111 www.adfors.com Technical Data Sheet Number: F2 Issued:

Technical Data Sheet Fiberglass mesh R117 A101 Typical use R117 A101 is one of our bestsellers and is used in a wide range of applications.  Mandatory component of ETIC systems  Facade render reinforcement  Interior plaster reinforcement Thanks to the balanced construction, high tensile strength and alkali resistance R117 A101 prevents any potential crack creation and by that protects the whole system from water infiltration and mould development. The life time of any system is by that prolonged to maximum. SAINT-GOBAIN ADFORS CZ Sokolovská 106, 570 01 Litomyšl Tel.: +420 461 651 111 www.adfors.com...

Technical characteristics Basic parameters Technical Data Sheet Number: F2 Issued: 1. 2. 2024

Technical Data Sheet Fiberglass mesh R117 A101 Installation ADFORS Vertex® Mesh 10 cm 1. Firstly, corner and window profiles should be correctly applied on the prepared surface. Then install the 30 × 50 cm mesh strips diagonally to avoid cracking. 2. Apply the first layer of base coat over the entire surface. 3. Apply the mesh from the top to the bottom of the wall by pressing it into the first layer of the base coat (starting from the centre then out to the side). 4. The overlap between the two mesh strips should be a minimum of 10 cm to ensure continuity of reinforcement. 5. Apply the rest...

Technical Data Sheet Fiberglass mesh R117 A101 packed in rolls — typical size 1,1 × 50 m — protected in plastic foil — tubeless packaging boxes stacked on standard pallets 120 x 80 cm 35 rolls/pallet for efficient transportation Certification European Technical Assessment – CE mark The glass fibre mesh fabrics we produce for ETICS are certified and marked with a CE mark. Generally, there is no harmonized standard for glass fibre mesh fabrics. Therefore, certification is based on a European Assessment DFORS Vertex® meshes Document (EAD). The EAD documents the methods and criteria adopted by the...