Technical Data Sheet ADFORS FibaTape® self-adhesive joint tape for plasterboard Product description ADFORS FibaTape® self-adhesive joint tape for plasterboard:    made from glass fibre self-adhesive in roll format — typical size 48 mm × 90 m — protected in plastic foil — packed in boxes on standard 120 × 80 cm pallets which are typically stackable The ADFORS FibaTape® family of products includes a complete range of innovative drywall joint tapes and cracks repair products, each offering strength, flexibility, easy installation and considerable cost savings. All of the ADFORS FibaTape® products are CE marked.

Technical Data Sheet ADFORS FibaTape® self-adhesive joint tape for plasterboard Typical use Every joint between plasterboards needs to be reinforced otherwise cracks can form. Self-adhesive fibre glass tape is the best solution as it is quick and easy to use. Unlike a paper tape which is non adhesive, it doesn‘t have to be embedded in a coat of jointing compound, thereby eliminating one time-consuming preliminary step. This makes the application time considerably quicker saving you time & therefore money. SAINT-GOBAIN ADFORS CZ Sokolovská 106, 570 01 Litomyšl Tel.: +420 461 651 111 www.adfors.c...

Technical Data Sheet ADFORS FibaTape® self-adhesive joint tape for plasterboard Product ranges ADFORS FibaTape® comes with various characteristics. Although all tapes share the same characteristics (e.g. they are easy to apply, made from fibre glass and provide high mechanical strength), they also have specific features that are only available for each type. ADFORS FibaTape® self-adhesive product range for plasterboards: Classic Universal self-adhesive drywall joint tape, offering the highest reinforcing performance possible with fast jointing and easy application. Mold-X Tape that boasts an...

ADFORS FibaTape*self-adhesive joint tape for plasterboardRoll sizes The roll itself is wrapped in shrink-film with usually a product label applied to the top side. The inner core is printed with ADFORS FibaTape® logo. These individual rolls are packed into cartons which are then stacked onto a pallet. We typically ship by truck so these are usually europallets. The pallet configuration may differ depending upon the roll length(s) & width(s) supplied, whether the goods are to be shipped by truck or by container etc. Our ADFORS FibaTape® range is supplied in printed tear-off display cartons printed...

ADFORS FibaTape® *DPU - Deposit per Unit (PES + coating + PSA) Thanks to its self-adhesive feature, FibaTape® can be easily applied in three steps. 1. First of all, make sure that joint is clean without dust, then apply the self-adhesive side directly onto the joint. 2. Cover the tape completely with a thin coat of plaster (5-10 cm wide) and allow it to dry. 3. To finish, cover with a further coat of plaster (15-20 cm wide). Officially we do not guarantee our tape's stickiness for a specific time. There are just too many variable factors that can affect the outcome of any given job - temperature,...

ADFORS FibaTape*self-adhesive joint tape for plasterboardWarranty Products are carefully checked before leaving our factory. They must also be checked before the final installation Any claim should be accompanied with the roll label and a sample featuring the defect. 001836 Production date Batch number 13.04.2021 0123456789CertificationCE Mark Products bear CE mark, this is based on European Technical Approval ETA-09/0075. Mold-X Attestation The product was tested for VOC emissions according to the requirements of the French legislation (order of April 2011) concerning the labeling of construction...