SADEV Schweiz AG SEON SADEV India PVT LTD PRIVATE LIMITED HYDERABAD N°RDC Annecy TGI 410 187 280 00020 - N° de gestion 96 b 812 - APE 285 C - SADEV® est une marque déposée de SB Ingénierie. 07/2014. Crédits photos : SADEV / MARGUERAT - Conception : agence-future.com

GLASS CLAMP FACADES GLASS CLAMP FACADES

GLASS CLAMP FACADES SADEVcIassic SADEVcIassic GLASS CLAMP FACADES Introduction Introduction Typical facade Technical A new fagade system for structural glazing with a unique aesthetic design incorporating gentle curves and exceptional finish. SADEV clamping systems guarantee performance & design, with maximum transparency. Thanks to a new fixing process, glass panels are supported even in cases of heavy applied loads. Requires no glass drilling, allowing easy and quick installation. Parts are made out of 316 Stainless Steel with a brushed finish (standard) allowing installation in both interior...

GLASS CLAMP FACADES SADEVfclassic SADEVfclassic GLASS CLAMP FACADES Designation : stainless steel clamp spider LOAD PARALLEL TO GLASS per arm LOAD PERPENDICULAR TO GLASS per arm GLASS SIDE VIEW Material : AISI 316 Finish : brushed GR 400 LOAD PARALLEL TO GLASS per arm LOAD PERPENDICULAR TO GLASS per arm GLASS THICKNESS GLASS THICKNESS GLASS THICKNESS References GLASS THICKNESS Mounting the spiders to the structure S3000P If mounting directly to the structure anti-rotation pins are recommended to prevent the clamps from rotating. The diameter of the anti-rotation pins is 6 mm. Do not pre-drill...

GLASS CLAMP FACADES SADEVfclassic SADEVfclassic GLASS CLAMP FACADES Designation : stainless steelclamp spider Mechanical performances Material : AISI 316 Finish : brushed GR 400 LOAD PARALLEL TO GLASS per arm LOAD PERPENDICULAR TO GLASS per arm LOAD PARALLEL TO GLASS per arm LOAD PERPENDICULAR TO GLASS per arm Dimensions Components GLASS THICKNESS GLASS THICKNESS GLASS THICKNESS Suggested mounting REFERENCES References GLASS THICKNESS Mounting of the spiders on the structure S4000P If mounting directly to the structure anti-rotation pins are recommended to prevent the clamps from rotating. The...

GLASS CLAMP FACADES Designation : clamp swivel fitting GLASS THICKNESS ARTICLE CODE GLASS CLAMP FACADES * SLS – Serviceability Limit State : load at 1mm deformation * ULS – Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com Components 11 option monti V* = glass thickness. MONTI M 14 OPTION Swivel fittings body External plate Bolt DIN 7991 M6 x 25 Security disk Protection plate Nut DIN 934 Washer Washer DIN127 Option 3025 Nut DIN 934 Monti option Suggested mounting Install the nut (# 6) + 1 washer (#7) on...

GLASS CLAMP FACADES HOOK SYSTEM HOOK SYSTEM

HOOK SYSTEM HOOK SYSTEM Fixing for glass facade Fixing for glass facade References PHOTO GLASS DRILLING Simple fixing Double fixing Simple fixing Double fixing * Please specify the glass thickness of facade and bracing. Dimensions SIMPLE FIXING DOUBLE FIXING ▪▪ Point Supported “Hook” system for facade. ▪▪ Alternative to traditional spider + rotule. ▪▪ Simple design. ▪▪ The hook system allows for rotation around the pin axis and horizontal movement. ▪▪ Available in both countersunk or cylindrical through hole glass drilling. ▪▪ It installs on a standard glass thickness between 10 (3/8 in) and...

HOOK SYSTEM HOOK SYSTEM Fixing system for glazing roof or canopy Fixing system for glazing roof or canopy References PHOTO GLASS DRILLING Simple fixing Double fixing Simple fixing Double fixing * Please specify the glass thickness of facade and bracing. Dimensions SIMPLE FIXING DOUBLE FIXING ▪▪ Fixing system for glass roof or canopy. ▪▪ Alternative to traditional spider + rotule. ▪▪ 316 stainless steel single or double attachment. ▪▪ Simple design. ▪▪ The canopy system allows for rotation around the pin axis and horizontal movement. ▪▪ The canopy system is available with countersunk screws or...

HOOK SYSTEM CLADDING SYSTEM CLADDING SYSTEM

CLADDING SYSTEM Cladding system Designation : exterior glass wall cladding Cladding system Mechanical performances SWIVEL FITTINGS PULL OUT CAPACITY SHEAR STRENGTH Vectorisé TECH NICAL Patent N° 9707408 Technical assesment available on request FIXED BOLTS TOTAL FAILURE TOTAL FAILURE TOTAL FAILURE TOTAL FAILURE * Tensile strength calculation according to EN 1993-1-8 and shear resistance according to EN 1993-1-4 References PHOTO GLASS THICKNESS Monolithic glass Laminated glass Swivel fittings + wind hook Laminated glass Fixed fastening + hook for weight Monolithic glass Fixed fastening + wind hook...

CLADDING SYSTEM TENSION RODS TENSION RODS

TENSION RODS Tension rods Description SADEVcIassic SADEVcIassic Tension rods LI L1 TENSION RODS Tension rods Hadev designs, manufactures and markets a wide range of rods to meet the aesthetic requirements required for contemporary structures The rods are available in 9 sizes and bars 1 single length up to 3m, sleeved beyond Material: stainless steel AISI 316 -X2C<rNiMo17-12-2 according EN 10088-3 - Marine quality Elastic limit = Rp0,2% = 355 N/mm2 Tensile strength = Rm = 70)0) N/mm2 Fork Elastic limit = Rp 0,2% = 200 N/mm2 Tensile strength = Rm = 510-710 N/mirR /////A Finish : Electropolished....

TENSION RODS TENSION RODS Accessories NUTS For this article, think about ordering a Spanner for the nuts. * Specify the thread ( G for left / D for right ). If the length ordered exceeds 3 meters, the tension rods being delivered in X equal lengths coupled by one or more Coupler. REPARTITION DISC Reference : STR 18 X-DR-90 custom made.

TENSION RODS

Our canopies are made of 316 ( A4 ) stainless steel. Without glass. Y:\00-Developpement nouveaux produits\110201_marquise type\SLDWKS\marquise doc - mardi 22 novembre 2011 1 Marquise light Glass drilling Documentation introducing standard models - Our internal engineering office can design tailor-made models on request. 42 PB BOTTOM BRACKET Y:\00-Developpement nouveaux produits\110201_marquise type\SLDWKS\marquise doc - mardi 22 novembre 2011 14:44:16 Subassembly reference to order Y:\00-Developpement nouveaux nouveaux produits\110201_marquise produits\110201_marquise type\SLDWKS\marquise type\SLDWKS\marquise...