Cyan : 100 / Magenta : 72 / Jaune : 20 / Noir : 0 Profiles for glass balustrades Innovation and safety The standard finish of profiles is anodized aluminium; other finish are available on demand, such as brushed stainless steel effect, and painted in the range of RAL colours. The profile SABCO is only 120 mm high and has a standard length of 2 500 mm. The fixing holes are Ø15 mm with distances from 200 to 400 mm. Inside you can insert laminated and tempered glasses from 15 to 25.52 mm. It holds glazings with height up to 2 100 mm and width from 500 to 2500 mm. The product has been tested to meet the standards of the following countries: copyright © SADEV 2015 - SABCO The SABCO has passed different trials which demonstrated the reliability of this system. The reports are available on request, on www.sadev.com. BS / AbP / ATEC France. Please contact us for more details. Cyan : 100 / Magenta : 72 / Jaune : 20 / Noir : 0 Cyan : 100 / Magenta : 72 / Jaune : 20 / Noir : 0 Cyan : 100 / Magenta : 72 / Jaune : 20 / Noir : 0 Cyan : 100 / Magenta : 72 / Jaune : 20 / Noir : 0

Natural aluminium / Brushed stainless steel effect / Painted RAL. Hole fixing distance Floor fixing Not acceptable w./m : Number of wedges per meter In several countries including the United Kingdom, a code of practice : BS EN 6180:2011, defines the requirements of a balustrade system that is used for the protection and guidance of persons. Wall * Certification : French certification (avis technique) or British standard. Hole fixing distance Procedure : The height of the spreader bar was adjusted to 1 100 mm above finished floor level. 3 test loads were assessed: a line load of 0.74,1.5 and 3.0...