*myarchiexpo

Catalogs
SADEV
Rotules

Rotules

Product catalog summary

Overview: The document provides comprehensive technical specifications and guidelines for the installation and maintenance of swivel fittings used in glass canopies. It covers various models, their mechanical performance, and detailed installation instructions.

Specifications: Multiple models of swivel fittings are detailed, including those with countersunk and cylindrical heads, and fittings for insulating glass units. Each model is identified by a unique code and is available in standard dimensions, with customization options. The fittings are compatible with glass thicknesses ranging from 8 mm to 31.52 mm.

Materials and Performance: Swivel fittings are primarily made from stainless steel, ensuring resistance to corrosion and mechanical stress. Mechanical performance data, including bending and pull-out capacities, are provided for different dimensions and materials, with specific values for M14 and M16 fittings under Serviceability Limit State (SLS) and Ultimate Limit State (ULS) conditions.

Installation Procedures: Detailed mounting instructions are provided for each type of fitting, including classic and blind mounting methods. The document emphasizes the importance of using the correct tools, such as a 19 mm wrench, and following specified torque settings to ensure proper installation and safety. The use of SADEV tools and thread locking compounds is recommended.

Maintenance Recommendations: Regular maintenance is advised, including annual cleaning and inspection for signs of wear or damage. Any abnormalities should be reported to the manufacturer.

Technical Assessments: The document references technical assessments and tests conducted by the CSTB, ensuring compliance with safety standards. It also mentions the availability of online resources for further technical information.

Customization and Options: Bespoke solutions are available, with feasibility studies and structural calculations offered based on EUROCODE standards. Options for seismic swivel fittings and additional components like cap nuts are also discussed.

Seismic and Safety Features: The document discusses the seismic performance of the fittings, noting successful tests for various models. It also highlights the availability of bomb blast resistant (BBR) fittings designed to protect building occupants from explosions.

Regulatory Compliance: Seismic regulations and building categories are addressed, with a table indicating the validation requirements for different zones and building types.

Catalog excerpts

SWIVEL FITTINGS Bespoke glass canopies Sadev can offer a feasibility study and basic structural calculation for your bespoke glass canopies based on EUROCODE. Don’t hesitate to ask for a quotation !

Open the catalog to page 1

SWIVEL FITTINGS SWIVEL FITTINGS Technical page for swivel fittings Glass drilling There are two main types of drillings: countersunk and cylindrical. The drilling drawings are included on all technical pages. COUNTERSUNK DRILLING The fixing piece plays a major role in the maintenance of the glasses. SADEV suggests two solutions to find the most adapted piece for your project. CYLINDRICAL DRILLING SWIVEL FITTING ( FXR ) FIXED BOLT ( FXV ) ▪▪ Very esthetical as the head of the countersunk fitting is in the plane of the glass. ▪▪ Simplifies the cleaning of the glass. Disadvantages : ▪▪ Highly unrecommended...

Open the catalog to page 2

SWIVEL FITTINGS Designation : swivel fitting, countersunk head LENGTH AXIS ( mm ) ARTICLE CODE Mechanical performance * R1001-0815-1465 : model - Glass Thickness - type axis and length. Seismic swivel fitting optional. SWIVEL FITTINGS GLASS THICKNESS Patent No : 9806556 Technical assessment available online : www.sadev.com Sealing strip between glazing available p.8.26 *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com Components OPTION...

Open the catalog to page 3

SWIVEL FITTINGS Designation : swivel fitting, countersunk head GLASS THICKNESS LENGTH AXIS ( mm ) ARTICLE CODE * 1101-0815-1465 : Model - Glass thickness - Type axis and length. R Patent No : 9806556 Technical assessment available online : www.sadev.com Sealing strip between glazing available p.8.26 SWIVEL FITTINGS *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com Components OPTION MONTI M 14 1 H = Swivel body corresponding to the thickness...

Open the catalog to page 4

SWIVEL FITTINGS Designation : swivel fitting, non-fluch countersunk head TECH NICAL GLASS THICKNESS LENGTH AXIS ( mm ) ARTICLE CODE * R1009-0815-1465 : Model - Glass thickness - type axis and length Seismic swivel fitting / BBR optional Patent No : 9806556 Technical assessment available online : www.sadev.com Sealing strip between glazing available p.8.26 SWIVEL FITTINGS *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com Components OPTION...

Open the catalog to page 5

SWIVEL FITTINGS Designation : swivel fitting, non-fluch cylindrical head, Ø 70 mm GLASS THICKNESS LENGTH AXIS ( mm ) ARTICLE CODE * 1003-70-0815-1465 : Model - Glass thickness - Type axis and length. R SWIVEL FITTINGS SPECIAL Patent No : 9806556 Technical assessment available online : www.sadev.com Sealing strip between glazing available p.8.26 *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com Components OPTION MONTI M 14 H = Swivel body...

Open the catalog to page 6

SWIVEL FITTINGS Designation : swivel fitting Ø 70, non-fluch, with flange and waterproof gusset GLASS THICKNESS LENGTH AXIS ( mm ) Bespoke glass thickness * R1005-V-1465 : Model - Glass thickness - Type axis and length. Patent No : 9806556 Sealing strip between glazing available p.8.26 ARTICLE CODE SWIVEL FITTINGS *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com Components OPTION MONTI M 14 Threaded Axle Glass hole grommet Contact washer...

Open the catalog to page 7

SWIVEL FITTINGS Designation : swivel fitting, non-fluch countersunk head for installation from the outside GLASS THICKNESS LENGTH AXIS ( mm ) ARTICLE CODE * R1006-0815-1465 : Model - Glass thickness - Type axis and length. Seismic swivel fitting optional SWIVEL FITTINGS SPECIAL Patent No : 9806556 Technical assessment available online : www.sadev.com Sealing strip between glazing available p.8.26 *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com...

Open the catalog to page 8

SWIVEL FITTINGS Designation : swivel fitting, countersunk head, for installation from the outside GLASS THICKNESS LENGTH AXIS ( mm ) ARTICLE CODE * R1008-0815-1465 : Model - Glass thickness - Type axis and length. Seismic swivel fitting optional SWIVEL FITTINGS SPECIAL Patent No : 9806556 Technical assessment available online : www.sadev.com Sealing strip between glazing available p.8.26 *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com...

Open the catalog to page 9

SWIVEL FITTINGS Designation : swivel fitting, cylindrical head for installation from the outside GLASS THICKNESS LENGTH AXIS ( mm ) ARTICLE CODE * 1038-0815-1465 : Model - Glass thickness - Type axis and length. R SWIVEL FITTINGS SPECIAL Patent No : 9806556 Technical assessment available online : www.sadev.com Sealing strip between glazing available p.8.26 *SLS - Serviceability Limit State : load at 1mm deformation *ULS = Ultimate Limit State : load at the elastic limit ( Rp0.1 ). Values are given without factor of safety. Tests available online : www.sadev.com Components 13 option monti Swivel...

Open the catalog to page 10

All SADEV catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list