ONE SIDE 2.0 10 to 15 % less laying time compared to the products on the market. Easier and faster assembly Differents adjustment possibilities Save on your build costs Less numbers of wedges per profile Tested and validated Accessible side Non-accessible side Adjustment of the 3 clamping screws on the accessible side. ONE SIDE 2.0 Evolution of accessibility with the ONE SIDE 2.0 wedge by Sadev

SHEET PRODUCT - ONE SIDE 2.0 WEDGE BALUSTRADE SYSTEM ONE SIDE 2.0 WEDGE Tightening on only one side of the profile allowing installation and adjustment only from the inside. Ref. 007AKIT08CAL1S TECHNICAL DATA Dimension Glass Glazing thickness [min.; max.] composition Adjustment for the inner side Adjustment for the inner side Adjustment for the outer side Other glass thicknesses are currently being validated. AUTO-AJUST SYSTEM Assembly in only 3 steps! Glass adjustment SABCO wedges have been developed to increase the durability and resistance of the system, while optimising the fit of the glass....

SHEET PRODUCT - ONE SIDE 2.0 WEDGE BALUSTRADE SYSTEM TECHNICAL DRAWINGS DIMENSIONS COMPATIBILITY OF THE ONE SIDE 2.0 WEDGE PROFILS Other cladding options are available in our catalogue. Non-accessible side Accessible side Snap-fit gasket Press-in gasket 76 Chemin des Poses I 74330 POISY I FRANCE I Tél. : +33 (0)4 50 08 39 00 I [email protected] I www.sadev.com

SHEET PRODUCT - ONE SIDE 2.0 WEDGE BALUSTRADE SYSTEM SCREWDRIVER + TORX BIT PACK SCREWDRIVER + TORX BIT Ref.: 007-TRVS-2NM Torx bit size : T25 Tightening : 2mn It allows tightening the glass in the wedges. This assembly tool is an help to fit the wedges in the balustrade. Order minimum 1 for tightening conformity Easy to disassembly! This tool is divided into 3 parts to allow you to remove the wedges. The led headband is placed under the wedge. SADEV - Sheet product - One Side 2.0 Wedge-GB - 10/2020 76 Chemin des Poses I 74330 POISY I FRANCE I Tél. : +33 (0)4 50 08 39 00 I [email protected] I www.sadev.com...