*myarchiexpo

Catalogs
SADEV
fixed bolts - SADEV Classic

fixed bolts - SADEV Classic

Product catalog summary

Specifications:
The document outlines detailed specifications for fixed bolts used in glass installations, referencing specific bolt types like V 2006 and V 2105. It specifies materials such as A4 stainless steel and polyacetal/polyethylene for washers.

Mounting Instructions:
Instructions for mounting bolts into glass are provided, including torque requirements for both monolithic and laminated glass. The use of a thread locking compound is recommended for stability.

Mechanical Properties:
The mechanical properties of the bolts are detailed, including bending and pull-out capacities, with specific measurements for Serviceability Limit State (SLS) and Ultimate Limit State (ULS), provided without a factor of safety.

Components:
A list of components is included, such as bolts, glass hole grommets, contact washers, glass nuts, and various washers and nuts, each specified with its material and standard references.

Applications and Options:
The document discusses typical applications and alternative products for non-standard dimensions, including options for cap nuts like Monti and 3025.

Additional Information:
For glass thicknesses outside the standard range, consultation with the supplier is advised. The importance of providing detailed glass composition information when making requests is emphasized.

Catalog excerpts

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.02 www.sadev.com - [email protected] SUMMARY Pages 2.03 >> 2.16 FIXED BOLTS :: Fixed bolt, countersunk head Ref: V 2001 > Page 2.03 Fixed bolt, countersunk head, for installation from the outside Ref: V 2002 > Page 2.05 Fixed bolt, cylindrical head, for installation from the outside Ref: V 2003 > Page 2.07 Fixed bolt, cylindrical head, for installation from the outside Ref: V 2004 > Page 2.09 Fixed bolt, cylindrical head Ref: V 2005 > Page 2.11 Fixed bolt, countersunk head Ref: V 2006 > Page 2.13 Fixed bolt, cylindrical head, Ø 50 mm Ref: V 2105 > Page 2.15

Open the catalog to page 1

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.03 www.sadev.com - [email protected] Reference: V 2001 Designation: fixed bolt, countersunk head. Glass drilling: Typical application: Mounting Alternate product Vertical façade Yes Roof/canopy Possible R1003 - R1005 Guard rail Possible V2003 - see SADEV Decor *Blind access No R1008 - R1006 Sloped glazing Yes Dimensions: *Installation from the outside (no access to the structure). H validated by SADEV depending on availability. Available for glass thicknesses from 8 to 31.52 mm, for other thicknesses please consult...

Open the catalog to page 2

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.04 www.sadev.com - [email protected] Reference: V 2001 Suggested mounting instruction: Insert parts No. 1/2 and 3 into the glass. Mount contact washer No. 4 and glass nut No. 5 and tighten to 20 Nm (15 ft-lb) for monolithic glass and 10 Nm (7.5 ft-lb) for laminated glass using SADEV tools ref. 758-11-60 and ref. CLE-DYN-072031. Mount nut No. 6 and washer No. 7. Insert the thread axle into the support with spacer E (available on request), see technical page. Adjust the depth. Mount washer No.7, lock washer No. 8, and...

Open the catalog to page 3

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.05 www.sadev.com - [email protected] Reference: V 2002 Designation: fixed bolt, countersunk head, for installation from the outside. Glass drilling: Typical application: Mounting Alternate product Vertical facade Yes Roof/canopy No V2005 Guard rail Possible see SADEV Decor *Blind access Yes Sloped glazing Yes Dimensions: *Installation from the outside (no access to the structure). H validated by SADEV depending on availability. Available for glass thicknesses from 8 to 31.52 mm, for other thicknesses please consult...

Open the catalog to page 4

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.06 www.sadev.com - [email protected] Reference: V 2002 Suggested mounting instruction: Insert parts No. 1 and 3 into the glass hole. Mount contact washer No. 4 and glass nut No. 5 and tighten to 20 Nm (15 ft-lb) for monolithic glass and 10 Nm (7.5 ft-lb) for laminated glass using SADEV tools ref. 758-11-60 and ref. CLE-DYN-072031. Mount into the support with bolt No. 2, tighten in function of the support with a 10 mm hex key. Mount cover cap No. 6 using SADEV tool ref. 758-11-60. SADEV recommends using thread locking...

Open the catalog to page 5

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.07 www.sadev.com - [email protected] Reference: V 2003 Designation: fixed bolt, cylindrical head, for installation from the outside. Glass drilling: Typical application: Mounting Alternate product Vertical facade Yes Roof/canopy Possible V2005 Guard rail Yes see SADEV Decor *Blind access Yes Sloped glazing Yes Dimensions: *Installation from the outside (no access to the structure). H validated by SADEV depending on availability. Available for glass thicknesses from 8 to 31.52 mm, for other thicknesses please consult...

Open the catalog to page 6

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.08 www.sadev.com - [email protected] Reference: V 2003 Suggested mounting instruction: A – Classic mounting Insert parts No. 2/3/4/5 into the glass hole. Mount the second contact washer No. 4, external plate No. 1, and bolt No. 9 and tighten to 20 Nm (15 ft-lb) for monolithic glass and 10 Nm (7.5 ft-lb) for laminated glass. Thread on nut No. 6 and apply washer No. 7. Insert the threaded axle into the support with spacer E (available on request), see technical page. Adjust the depth. Mount the second washer No. 7, lock...

Open the catalog to page 7

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.09 www.sadev.com - [email protected] Reference: V 2004 Designation: fixed bolt, cylindrical head, for installation from the outside. Glass drilling: Typical application: Mounting Alternate product Vertical facade Yes Roof/canopy Yes Guard rail Possible see SADEV Decor *Blind access Yes Sloped glazing Yes Dimensions: *Installation from the outside (no access to the structure). H validated by SADEV depending on availability. Available for glass thicknesses from 8 to 31.52 mm, for other thicknesses please consult us....

Open the catalog to page 8

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.10 www.sadev.com - [email protected] Reference: V 2004 Suggested mounting instruction: Insert parts No. 1, 4, and 3 into the glass hole. Mount the second contact washer No. 4 and glass nut No. 5 and tighten to 20 Nm (15 ft-lb) for monolithic glass and 10 Nm (7.5 ft-lb) for laminated glass using SADEV tools ref. 758-11-60 and ref. CLE-DYN-072031. Mount into the support with bolt No. 2, tighten in function of the support with a 10 mm hex key. Mount cover cap No. 6 using SADEV tool ref. 758-11-60. SADEV recommends using...

Open the catalog to page 9

FIXED BOLTS FIXED BOLTS :: Tel. +33 (0)4 50 08 39 00 - Fax +33 (0)4 50 08 39 49 2.11 www.sadev.com - [email protected] Reference: V 2005 Designation: fixed bolt, cylindrical head. Glass drilling: Typical application: Mounting Alternate product Vertical facade Yes Roof/canopy Yes Guard rail Yes see SADEV Decor *Blind access No V2003 Sloped glazing Yes Dimensions: *Installation from the outside (no access to the structure). H validated by SADEV depending on availability. Available for glass thicknesses from 8 to 31.52 mm, for other thicknesses please consult us. Monolithic glass Laminated glass V...

Open the catalog to page 10

All SADEV catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list