Nominal Thread Diameter Mesh Opening Open Area Fabric Thickness Specific Cross-section Max. Recommended tension from-to The above data are average values measured on piece-good in relaxed state, manufactured with yarns of a perfect nominal diameter (cfr. international standards), under normal hygrometric conditions (20°C=68°F, 65% relative humidity). They are subject to normal variations up to 7% if conditions vary from those stated above. The listed technical specifications, exception made for the thread diameter indicated with its nominal value, are referred to the arithmetic mean value of production samples and are subject to change, in accordance with our policy of continuously improving our products. The tension tests are realised with TOP12 series clamp system and appropriate frames at our laboratories. Fabrics with mesh count from 15 to 32 (n/cm) may be available under request; PE 150.34 TW and PE 140.034 TW may be available under request. PW: Plain Weave (1:1), TW: Twill Weave (1:2 - 2:2). World Headquarters SAATI S.p.A. - Via Milano, 14 - 22070 Appiano Gentile (CO) - Italy Phone: (+39) 031 9711 - Fax: (+39) 031 933392 E-mail: [email protected]