Surface Treated Mesh for Glass Printing Applications Exclusively developed for glass screen printing industry, SAATI Hi-Glass is an innovative high modulus, low elongation monofilament polyester screen printing fabric with a proprietary surface treatment. Its excellent dimensional stability improves the printing registration, while its uniform mesh openings and fabric thickness guarantee controlled ink deposit. Excellent mechanical behavior Low elongation Low relaxation Optimized mesh geometry and precise mesh openings due to improved production process Long Lasting surface modification thanks to Plasma treatment Excellent antistatic property. Mesh Opening Open Area Fabric Thickness Nominal Thread Diameter Count n°/cm Specific CrossSection Max.recom. Tension From-To The above data are average values measured on piece-good in relaxed state, manufactured with yarns of a perfect nominal diameter (cfr. international standards), under normal hygrometric conditions (20°C=68°F, 65% relative humidity). They are subject to normal variations up to 7% if conditions vary from those stated above. The listed technical specifications, exception made for the thread diameter indicated with its nominal value, are referred to the arithmetic mean value of production samples and are subject to change, in accordance with our policy of continuously improving our products. The tension tests are realised with TOP 12 clamp system and appropriate frames at our laboratories. Available in white and yellow colors in different widths. For actual availability, please contact your sales representative. PW: Plain Weave (1:1). To place an order, call 1-800-431-2200. To receive Safety Data Sheets (SDS), please send an e-mail to: [email protected]. To get more information, visit our webs