LEDWAY Road
5Pages

Cree Europe Srl a SU Via Dei Giunchi, 52/54 – 50145 Firenze (FI) Tel. +39.055.343081 Fax +39.055.34308200 www.cree-europe.com LEDWAY Road – 7 Mount for post top and arm installation Order codes Light bars (Standard Version) Compact LED Street Light for post top and arm installation. Housing is all in aluminum construction, all components are mercury free and totally recyclable. Sharp profile for low wind exposition. Tool less entry (toolfree system). LED Lightbars applied on an aluminum extrusion designed for best thermal management thanks to the Ruud AirFlow Technology. The system ensures long life and maximum yield. Degree of protection against external impact IK08. Exclusive ColorFast DeltaGuard finish features an E-Coat epoxy primer with an ultra-durable silver powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. The finish is covered by our Deltaguard 10 year limited warranty. LED LightBar modules made of 10 or 20 LEDs tested, with every single optic type, according to the CEI EN 62471 standard for photobiological safety of lamps and lamp systems. Light system rated power between 20 and 120 LED, 4000K Color temperature, CRI 75. Available also in 5700K and 3500K Color Temperature LED. Ledway Road is equipped with high brightness LED (lumen output > 130lmW) Main dissipation body in extruded aluminum with an integrated printed gasket designed around the geometry of the lenses to guarantee an IP66 degree of protection. High-performance and precision lenses made of Ruud NanoOptic® patented technology. Photometric performance and curves selectable for any application requested. Internal highperformance and reliability electronic constant current driver, tapped on 700mA driving current (as standard version), available also with driving current at 525mA, 350mA. The tenon mounting system means it can be mounted on an arm or pole top (90°) and tilt adjusted in 5° increments to keep it horizontal with the ground. It can be used both for new installations or retrofits on ø 60mm supports. 10 years limited warranty. Insulation Class I. Degree of Protection IP66. Power factor > 0,9 Compliant with: EN 60598-1; EN 60598-2-3. Rated Voltage: 220 – 240Vac (capable 120-277Vac) 50 60Hz

Cree Europe Srl a SU Via Dei Giunchi, 52/54 – 50145 Firenze (FI) Tel. +39.055.343081 Fax +39.055.34308200 www.cree-europe.com Available options Flux dimming control with occupancy sensor Power line control system with dimmable driver Consult factory for different configurations Flux dimming control H/L See technical documentation for available configurations Dimmable driver 1-10V with external controller Two levels option with virtual midnight See technical documentation for available configurations Integral dimming system with plants including flux regulators See technical documentation...

Cree Europe Srl a SU Via Dei Giunchi, 52/54 – 50145 Firenze (FI) Tel. +39.055.343081 Fax +39.055.34308200 www.cree-europe.com Photometric Diagram The following Photometric diagram are expressed in cd/kLm, are referred to photometric reliev performed by independent labs. AC Optic 40 LED @700mA 6 mt. height isolux diagram 40 LED @700mA 6 mt. height isolux diagram

Cree Europe Srl a SU Via Dei Giunchi, 52/54 – 50145 Firenze (FI) Tel. +39.055.343081 Fax +39.055.34308200 www.cree-europe.com 40 LED @700mA 6 mt. height isolux diagram TS Optic 40 LED @700mA 6 mt. height isolux diagram 40 LED @700mA 6 mt. height isolux diagram

Cree Europe Srl a SU Via Dei Giunchi, 52/54 – 50145 Firenze (FI) Tel. +39.055.343081 Fax +39.055.34308200 www.cree-europe.com 40 LED @700mA 6 mt. height isolux diagram