1 Features and Technical Specifications E246X, E247X Series Compact Speed Gate Features and Technical Specifications V3.3 Updated on November 13, 2025

2 Features and Technical Specifications 1. Product Description The E246X series (referred to as the 6 series) is divided into two models: E2462 (single-core main unit) and E2463 (dual-core main unit). The E247X series (referred to as the 7 series) is divided into three models: E2472 (single-core host machine) , E2473 (dual-core shaft host machine) and E2470 (singlecore host machine). The height of the whole machine of the two series of products is different, and the height of the upper edge of the glass from the ground is different. There are differences among the various models of the 6-series...

3 Features and Technical Specifications 1.1. Dual-Gate Single-Passage Illustrate On both sides of the channel are the same model of host, but the placement direction is different. Partition glass accessories can be installed on both the left and right sides. 1.2. Dual-Gate Multi-Passage Illustrate Models on both sides of the channel: E2462, 72. E2463 and 73 are added in the middle, and multiple E2463 and 73 can be expanded into multiple channels.

Features and Technical Specifications The length, width and mounting hole size of each model of 6 series and 7 series are the same. The height of different series of products is different.

Features and Technical Specifications Side View

Features and Technical Specifications The doors of the 6 series and 7 series are made of 10 mm thick ultra-white tempered glass, and are available in several widths for users to choose according to the place of use. 3.1. Channel width Partition Glass Partition Glass

Features and Technical Specifications If the width from the center of the main unit to the wall is > 30 cm, it is recommended to install wall partition glass. Please select the corresponding model of glass door as wall partition glass, and install it on the fixed door shaft.

Features and Technical Specifications Note: Door panel dimensions marked with * are the default standard sizes; all others are custom sizes. The Easy Installation Accessory is a set of accessories that are convenient for installing the main unit, common to the 6 Series and 7 Series. Using the standard

9 Features and Technical Specifications mounting accessories, there is no need to open the wire groove between the channels, the installation of the main machine does not require expansion screws, and no additional wires are required. Easy installation accessories include 3 types: base to install main unit E2462, E2472 and E2470(WX2, WX2S), base to install main unit E2463 and E2473(WX3S) and passage connection base (WX55 ~ WX110). Main unit base is equipped with leveling screws on the four corners, main unit mounting holes, wire inlet holes, and mounting screw holes for the channel connection...

Features and Technical Specifications Note: The dimensions of the convenient installation accessories marked with * are the default standard sizes, the others are custom sizes. The user can choose the easy installation method, the simple engineering installation method or the engineering installation method. The characteristics of the three installation methods and the adaptation scenario comparison are as follows:

Features and Technical Specifications Using the easy Installation accessories, there is no need to open the wire groove between the channels. the installation of the main machine does not require expansion screws, and no additional wires are required. Easy installation accessories include 3 types: main unit base WX2 to install E2462 and E2472, main unit base WX3S to install E2463 and E2473 and passage connection base WX55~WX110. The effect after assembly is shown in the figure below:

12 Features and Technical Specifications 4.2. Easy Engineering Installation Using the easy Installation accessories, there is no need to open the wire groove between the channels. The main machine can be installed and fixed with glass glue or expansion screws according to the ground conditions, and no additional wires are required, which can simplify the complexity of engineering installation. Easy engineering installation accessories include 3 types: main unit base WX2S to install E2462 and E2472, main unit base WX3S to install E2463 and E2473 and passage connection base WX55~WX110. The effect...

13 Features and Technical Specifications E2470 main units are installed with the "simple engineering installation" method. The main unit is fixed with the main unit base WX2S, and fixed to the ground with expansion screws or glass glue. The effect after assembly is shown in the figure below:

14 Features and Technical Specifications 4.3. Engineering installation Engineering installation accessories need to be used. Engineering installation accessories include: ①. Mounting hole alignment card: used to install the auxiliary positioning host. Each host is equipped with a mounting hole alignment card; ②. Cable accessories: For power supply and network connections between channels, each set includes 1 three-core power cable and 1 network cable. Each channel is equipped with 1 set, individually packaged. The width of the channel is different, and the length of the cable is also different;...

15 Features and Technical Specifications 6. Functional Components The Exquisite smart compact Speed gate adopts a modular design. Each module is an intelligent unit that can be diagnosed and have its firmware upgraded via the platform or locally through the controller. The universal, interchangeable modular design simplifies inventory management for integrators and facilitates equipment maintenance. 5.1. Controller (PM2525MC) The PM2525MC is speed gate controller that connects to intelligent accessories via Wiegand, relay, RJ45, RS485 bus, or USB interface. The PM2525MC has built-in Bluetooth...

16 Features and Technical Specifications ②. RS485，connects to PM2422H ； ③. USB，used to update firmware； ④. RS485，connects to PM2422H ； ⑤. RS485，connects to PM2422H ； ⑥. terminal block，connects to buzzer； ⑦. RJ45，connects to PM2525S； ⑧. RJ45, connects to third-party card reading & access control integrated device； ⑨. RJ45, connects to PM2525FI； ⑩. Relay，connects to PM2525FI； ⑪. RS485，connects to PM2422H ； ⑫. Relay, connects to third-party card reading & access control integrated device； ⑬. RF coaxial connection port 0，connects to the Bluetooth antenna； ⑭. RF coaxial connection port 1，connects...