Roto Safe C
123Pages

Window and Door Technology Mechanical multipoint locking for cylinder-operated doors C600 / C500 Installation, maintenance and operation instructions for timber, PVC and aluminium profiles

Contact Roto Frank Fenster- und Türtechnologie GmbH Wilhelm-Frank-Platz 1 70771 Leinfelden-Echterdingen Germany Phone +49 711 7598 0 Fax +49 711 7598 253 info@roto-frank.com www.roto-frank.com

General information General information Version history Version Changes Variable striker strip added  from page 88 C600 - three-part added  from page 48 Instructions This manual contains important information, instructions and assembly guidelines for the installation, maintenance and operation of hardware. The information and instructions contained in this document refer to products belonging to the Roto hardware system named on the front page. All steps must be completed in sequence. The following documents apply in addition to these instructions: Additional guidelines and directives ■...

General information Symbols INFO Any dimensions without a unit in the instructions are given in millimetres (mm). Other units of measurement are clearly indicated by the presence of the differing unit. INFO Figures are provided in the left-hand version (DIN 107). The process for the right-hand version is mirror-inverted. Symbols Symbol First-level list Second-level list Unnumbered step Numbered step Numbered second-level step Pictographs Symbol Meaning Timber Faceplates Symbol Automatic bolt Combination lockings Power wedges

General information Explanation of terms Sash rebate height Installation instructions Torque in newton metres Additional locking device Explanation of terms Locking The term “locking” refers to the deadbolt in the main lock and the additional locking systems, used to lock the door securely. Door secured The term “door secured” means that the door is secured using the latch in the main lock but is not locked. Actuating the door lever handle causes the latch to retract, allowing the door to be opened. Door locked The term “door locked” means that the door is secured by an unsprung rigid...

General information Target groups’ obligation to give instructions Builders The “builders” target group includes all companies and individuals who place orders for the manufacture of doors for installation in their construction projects. End users The “end users” target group includes all individuals who use the installed doors. Target groups’ obligation to give instructions INFO Each target group must fulfil their obligation to give instructions in full. Unless specified otherwise in the text below, documents and information can be passed on as a printed document, on a data storage device...

General information Limitation of liability Limitation of liability All information and instructions contained in this document have been compiled in consideration of the applicable standards and regulations, the latest developments in technology and many years of knowledge and experience. The hardware manufacturer assumes no liability for damage caused by: ■ Failure to comply with this document and all product-specific documents and other applicable directives (see the chapters entitled “Security” and “Stipulated use”). Improper use / misuse (see the chapters entitled “Security” and...

General information Preserving the surface finish ATTENTION Using incorrect cleaning agents and sealing compounds may cause property damage. Cleaning agents and sealing compounds may damage the surfaces of components and gaskets. u Do not use aggressive or flammable liquids, acidic cleaners or abrasive cleaners. u Only use mild, pH-neutral cleaning agents that have been diluted. u Apply a thin protective film to the components, for example using a cloth soaked in oil. u Avoid aggressive vapours (e.g. produced by formic acid, acetic acid, ammonia, amine compounds, ammonia compounds,...

Security This manual contains instructions relating to safety. The principal safety information in this chapter includes information and instructions relevant to the safe use or maintaining the safe condition of the product. Warning instructions that relate to handling warn of residual risks and are located before steps that are relevant to safety. u Follow all of the instructions in order to prevent personal injury and property and environmental damage. Presentation and structure of warning instructions The warning instructions relate to individual actions and are structured as follows...

Security Basic safety information Misuse Misuse Any use and processing of the products that goes beyond or differs from the stipulated use is considered misuse and can lead to hazardous situations. WARNING Misuse may pose a risk of death! Misuse and incorrect installation of hardware can lead to serious injuries. u Only use hardware combinations that have been approved by the hardware manufacturer. u Only use original accessories or those that have been approved by the hardware manufacturer. u Note the product-related documentation  from page 7. Usage restriction Open and unlocked doors do...

Security Basic safety information Use Use Trapping body parts in the opening between leaf and frame may lead to serious injuries. Gripping between the leaf and frame when closing doors poses the risk of crushing injuries. u u u When closing doors, never grip between the leaf and frame and always exercise caution. Keep children and anyone unable to understand the risks away from the hazardous area. Refrain from slamming the door shut deliberately or uncontrollably. Opening and closing leaves improperly poses the risk of injury and property damage. Incorrect opening and closing of leaves can...

Security Operation Ambient conditions Carry out care and cleaning tasks in accordance with these instructions. Always have regular maintenance, adjustment and repair work carried out by a specialist company. Refrain from performing work on the multipoint locking or striker plate that could impact the structure, mode of operation or correct functioning. Refrain from introducing foreign and unsuitable objects into the multipoint locking or striker plate. Ambient conditions Physical and chemical influences may result in property damage. Multipoint lockings can be permanently damaged to the...