Acoustic insulation products
24Pages

Rotho Blaas France SARL France - Colmar Rotho Blaas GMBH Austria - Innsbruck Rotho Blaas Iberica SL Spain - Manresa ROTHOBLAAS AROUND THE WORLD Russia - Saint Petersburg Rotho Blaas Baltic SIA Latvia - Riga Rotho Blaas Argentina SRL Argentina - Buenos Aires Rotho Blaas Brasil LTDA Brasil - Curitiba Rotho Blaas Colombia SAS Colombia - Bogotà Fastener Soluciones SA Ecuador - Quito Rotho Blaas Chile SPA Here, everything that involves the Chile - Santiago Rotho Blaas Australia PTY LTD product is done internally. We take care of the Australia - Sydney entire process from the idea to its...

STRUCTURAL ACOUSTIC INSULATION THE IMPORTANCE OF ACOUSTIC INSULATION “Noise, dened as sound with a negative eect on one’s physical and psychic well-being, represents one of the most common factors that are harmful to the environment in which man lives and works.” The quality of acoustic insulation is one of the most important factors aecting the liveability of a house. For this reason good acoustic insulation is extremely important. EVALUATION OF ACOUSTIC COMFORT The tollerance level or maximum threshold which does not cause discomfort to the user in relation to the type of ambiance and the...

NOISE PROPOGATION Sound is transmitted through the air as waves of pressure. In order to propagate in the environment it needs an elastic means (gas, liquid or solid). In the specic case of noise propogation inside buildings, the propogation means are the structural components of the building such as walls and ceilings. Sound transmission takes place according to two distinct propagation mechanisms: • Air-borne; free propagation through air without encountering obstacles. • Structural; propagation through solid structures via elastic vibrations. If we consider the propagation of sound...

ALADIN STRIPE ALADIN STRIPE EPDM soundproofing strip Suitable for common linear loads in wooden structures. We suggest specific computing to find the most suitable profile based on load transmitted from floor to wall. Absorbs up to 4 dB, according to 0 NORM EN ISO 140-7 Footstep noise reduction certified by Holzforschung Austria Specific mixture for guaranteeing performance in different environmental conditions Reduced application thickness (2 - 3 mm) Available in 2 different widths CODE VERSION LENGTH [m] WIDTH [mm] THICKNESS [mm] pcs/O

ALADIN STRIPE The EPDM strip is available indifferent sizes. It covers greater linear loads present in wooden structures and an application thickness between 2 and 3 mm can be obtained. Its installation is easy and quickbecause the product can be installed with common woodworking tools. Specific weight Hardness VERSION Soft Extra Soft Extruded EPDM Tear strength Elongation at break point Compression deformation Installation temperature APPLICATIONS AND APPLICATION TIPS • Suitable for installation between wood and wood to separate the material so as to absorb the irritating noise of...

ALADIN STRIPE AIM OF THE ACOUSTIC TEST Rothoblaas in collaboration with the Holzforschung Austria company has designed several tests to improve the soundproong qualities of the ALADIN STRIPE acoustic strip. DESCRIPTION OF THE ACOUSTIC TEST The acoustic tests were carried out on a two-storey wooden house. The house being tested had the following dimensions: 5.12 x 7.52 m. ACOUSTIC TESTING PROCEDURES The upper storey was the emitting area for all the tests, whereas the lower storey was the receiving area. The measurements were made with 3 dierent load conditions which made it possible to...

ALADIN STRIPE RESULTS OF THE ACOUSTIC TESTS IMPROVED EFFICIENCY Despite the important soundproong power of the oor - ceiling - false ceiling construction elements, the new composition mixtures have made it possible to greatly improve the soundproong power of the ALADIN STRIPE acoustic strip. The tests performed in collaboration with the Holzforschung Austria company demonstrated a large increase in quality with the use of ALADIN STRIPE acoustic strips. EXPERIMENTAL TEST DATA TYPE OF SOUNDPROOFING STRIP ADDITIONAL LOAD Extra soft Extra soft Extra soft * Measurements made without the use of...

SOUNDPROOFING STRIP Strip made of split EPDM for blocking the noise of footsteps. The EPDM strip is available indifferent sizes. It covers greater linear loads present in wooden structures and an application thickness between 2 and 3 mm can be obtained. Its installation is easy and quickbecause the product can be installed with common woodworking tools. CODE VERSION LENGTH [m] WIDTH [mm] THICKNESS [mm] pcs/O Specific weight Tear strength Elongation at break point Compression deformation Installation temperature APPLICATIONS AND APPLICATION TIPS • Suitable for installation between wood and...

ABSORBER STRIPE High performance soundproofing strip Product highly specific for noise reduction. Divided into load ranges, it requires specific designing for different walls based on linear load Certified acoustic attenuation Various types to meet a wide range of loads Clear product identification thanks to colour coding Quick and easy installation, can be installed by means of common woodworking tools Permanently elastic

ABSORBER STRIPE Covers a wide range of loads, from 1 to 230 kN/m. Permanently elastic. Free of softeners or other volatile substances. Clear identification of products Thanks to the colour scheme. Quick and easy installation applicable using common woodworking tools. Improvement of acoustic insulation. Approved by the Holzforschung Austria company. In both types of sound propagation (air-borne and structural transmission) it is indispensable to adapt adequate structural connection techniques between buildings having dierent acoustic characteristics. Besides the acoustic properties of the...

ABSORBER STRIPE Permanent static load Peak load Minimum breaking tension Static shear module (at a permanent static load) Dynamic shear module (at a permanent static load, 10Hz) Mechanical loss factor Static elasticity module (at permanent static load) Dynamic elasticity module (at a permanent static load. 10Hz) Processing temperature * Values obtained according to the standards in force ** Values are valid for a shape factor q=3. Thickness of material 25 mm *** The friction measurements are based on dierent test parameters All indications and values are based on our present state of...