Heating oil tanks
32Pages

Energy Systems Heating oil tanks Experience and competence for your safety Living full of energy

Oil heating is still an economical and environmentally friendly heating technology – it is good value and unmatched in terms of safety. The complete heating system also includes the economical, space-saving and unproblematic storage of the fuel.

A future with oil Oil with a future constant in modernisation and new A buildings Is oil heating an outdated system? Quite the contrary. The new condensing heating systems in combination with solar reduce oil consumption by up to 40 % (according to IWO). The advantages to you at a glance > very efficient > consumption (ideal partner for low renewable energies) > conserves resources > good for your purse > lower emissions = climate protection il will last for at least the next O 100 years The oil and the oil tank > heat store (long-term energy store) > liquid fuels have good storage...

Development – Manufacture – System all from one source he Roth philosophy for heating oil T storage prevails: long-term safety is the priority! In 1971, Roth invented the double-walled plastic tank with a steel outer casing. Since that time, the Roth steel/PE tank has proved itself 100 000 times over. Derived from the so-called "domestic tank", two-walled solutions in steel/plastic and plastic/plastic design for oil central heating have now established themselves on the market. Single-walled plastic tanks, which require secondary protection to be created on site, are increasingly being...

Roth heating oil tanks quality proven over decades oth heating oil tanks – R unbeatable quality products > They are made of high-quality polyethylene (PE-HD) which has proved its worth over decades of use. In the case of the DWT they also have an integral collecting trough made of sheet steel that is fully galvanised inside and out with a high-quality polymer seal. > They guarantee protection against diffusion: DWT plus 3: emissions-free metal encapsulation – guarantees complete protection against diffusion. Plastic tanks (single- or double-walled): CoEx-PA-Blend ® procedure * manufactured...

Roth DWT plus 3 makes room for innovation simple,  clean and space saving! Your Advantage State-of-the-art tank assembly with Roth DWT plus 3 and Roth KWT: all steps in a single process ! > no separate room Roth DWT plus 3 and Roth KWT for the storage of up to 5000 litres may be installed in the boiler room.

oom for more R The compact tank system from Roth gives you space for something new. With low oil consumption thanks to efficient calorific value technology, the systems are economical and have small dimensions. Systems with a capacity of up to 5000 litres can be installed in a boiler room. This makes additional space for storage, hobbies and comfort.

Roth DWT plus 3 with attractive combined protection "Full speed ahead !" is Roth's battle cry as it meets the future fully equipped to deal with the needs of alternative fuels. ttractive combined protection with full A galvanisation and high-quality polymer sealing Dirty surfaces not only give an unattractive impression, they can sometimes even adversely affect operation. Combined protection consisting of durable full galvanisation and a high-quality polymer coating seals the premium Roth DWT plus 3 tank in order to prevent dirt and fingerprints from sticking (anti-fingerprint effect). Even...

Roth DWT plus 3 metal/plastic – the proven composite solution Roth anchoring system he plus 3 double-walled tank for T maximum safety and quality of living The DWT plus 3 is tightly sealed using Roth's steel meltpress process. A leak probe enables the tank interspace to be monitored for safety. Being completely contained within leak-monitored metal, the DWT plus 3 truly is double-walled all around. The PE inner tank and the steel outer tank, which is tightly sealed all around, are tightly and firmly joined in the vicinity of the tank connection. TÜV has certified the quality of the DWT plus...

For renovation decisions, 80 per cent of the height of the cellar is the determining factor. With the new DWT plus 3 750 l, it is no longer an issue. Approx. 1490 mm height DWT 750 l, inc. pipe system Approx. 1840 mm Ø high standard 750 l tank inc. pipe system Roth DWT plus 3 750 l our renovation specialist The average height of a 750 l tank corresponds to 1626 mm plus filling pipes and thus causes handling and installation problems in many older cellars. WT plus 3 750 l – minimal height, maximum benefits D Roth is now offering the extremely low-rise DWT plus 3 750 l. It is perfect for...

Roth DWT plus 3 all-round safety WT plus 3 – the quality tank with the D quality transport protection > Styropor cover Perfect protection of the leak probe and level gauge > Pallet with all-round buffers Optimum safety during delivery > Film hood Ideal protection of the top area from dirt and moisture

Roth DWT plus 3  at a glance

Füllstar® System > he few parts are installed without tools apart from the installer's t own hands. Fire safety Diffusion protection > re safety according to the 90-minute standard fire test at the MPA, fi Dortmund. 3 times the safety time of the standard fire test. > ermanent odour absorption by metal encapsulation that is tightly sealed p all round. Thanks to its material properties, steel permits absolute diffusion protection. > articularly suitable for the storage of standard heating oils and heating oils p with biogenic components. Corrosion protection Easy handling > eading protects...

Roth KWT the quality tank in standard design oth KWT R The double-walled Roth KWT is made entirely of plastic with a polyethylene inner tank and a polyethylene tray. The edge of the tray connects directly to the tank on the inside, creating a single functional tank unit. The compact design gives the Roth KWT extremely high strength without straps or beads. Smooth walls with a band-shaped bulge in the top part give it an unmistakably modern design. The diffusion layer is achieved by material upgrading for all single- and double-walled polyethylene tanks. Polyamide blend is deposited using...