UNIMONDIAL
UNIMONDIAL
- Shelves: Designed with a triple bend on all sides to eliminate sharp edges, enhancing safety.
- Plastic Foot: Reinforced with fiber, highly resistant to pressure, with a thickness of 5 mm.
- Steel Foot Plate: Suitable for mezzanines or middle room installations.
- Upright Slots: Elliptical shape without sharp edges, improving capacity and safety. Slots are recessed to prevent accidental hooking.
- Ceiling Register: Anchored by an adjustable central pivot with a plastic contrast disc for added strength.
- Rear Cross Bracings: Provided for additional structural stiffening in special cases like great heights or mezzanines.
- Marking: All structural elements are marked for complete traceability according to ACAI-CISI and UNI EN ISO 9001 standards.
- Shelf Thickness: 0.75 mm with edges of 32 and 33 mm, corners joined by welding or mechanical pressing.
- Upright Width: 32 mm, with a total development of 155 mm for heights up to 3 meters.
- Double Clipping Hook: Provides automatic block on the lower part of the upright.
- Welded Reinforcements: Combine cost-effectiveness with high solidity.
- Galvanized Shelves: Can be mounted on Unimondial posts, offering flexibility in use and easy cleaning.
- Simple Mounting: Boltless system allows easy assembly by non-specialized personnel without specific tools.
- Shaped Hook: Allows full utilization of the storage compartment.
- Slot Standard Pitch: 50 mm, with an option for 25 mm for uprights up to 3 meters.
- Removable Reinforcements: Allow capacity variation of shelves as needed.
- Inserted Smooth Panels: Ensure proper containment and stability of loads.
- Inserted Punched Panels: Offer better aeration and fire-fighting efficiency.
- Hooked Back Panels: Provide containment and stability, also serving as closure and protection.
- Safety Mesh: Ensures containment and stability, improves aeration and natural light.
- Doors: Single-piece doors offer additional strength and protection.
- Sliding Doors: Enhance safety and protection from dust and deterioration.
- Total Extraction Drawers: On telescopic slides, with a load capacity of 90 kg, fully divisible internally.
- Containers on the Shelf: Transform shelves into practical containers with a back border of 150 mm and a front border of 80 mm, allowing easy access and identification of stored materials. Trapezoidal partitions can be placed every 50 mm for flexible space management.
- Front Skirting: Aesthetic and functional finishing element that closes the bottom of the first loading level, preventing dust accumulation.
- Clamp Dividers: Vertical dividers for organizing flexible materials, preventing lateral sliding.
- Single and Double Central Stop: Divides the shelf longitudinally to prevent goods from sliding when used from both sides.
- Shelves with Slots: Allows installation of dividers for creating filing cabinets.
- Dividers for Shelves with Slots: Fixed vertical partitions for forming boxes within shelves, made of painted steel.
- Hanging Files Holder: Converts shelves into functional hanging file holders.
- Hanging Files with Total Pulling Out: Aluminium profiles for storing hanging files with full extraction capability.
- Tube for Hanging Clothes: Facilitates storage and retrieval of hanging clothes using galvanized oval tubes.
- Tires Holder Tube: Allows safe storage of tires with adjustable support distance.
- Front and Back Stop on Shelf: Prevents stored goods from sliding off shelves.
- Sliding Shelf: Made of press-bended steel, allows quick consultation of archived materials and supports boxes during sorting.
The document includes a table of standard and available measurements for frame heights, shelf depths, and shelf lengths, with options for custom requests.
Catalog excerpts
SCAFFALE A GANCIO COMPONIBILE BOLTLESS MODULAR SHELF
Open the catalog to page 1
"I WANT TO ALWAYS BE SOMEWHERE SAFE AND BEAUTIFUL" Rossano Bettini Rossano Bettini Founder Stefano, Sandro, Silvano Simone Bettini - ROSSS S.p.A.
Open the catalog to page 3
ROSSS QUALITY RIGOROUSLY MADE IN ITALY
Open the catalog to page 5
• PIONIERI DELL ANTISISMICO • LARORATORIO PROVE INTERNO ROSSS installa il suo primo impianto antisismico nel 1996, esegue importanti prove e test nel 2006 su tavola vibrante all'Universita di Atene e nello stesso anno consegue il brevetto per il primo piedino antisismico progettato in Italia. Oggi ROSSS continua ad effettuare ricerca e studi specialistici in campo antisismico, coadiuvata anche da grandi Universita italiane ed estere. ROSSS e Tunica azienda italiana del suo settore ad avere al suo interno un efficiente e moderno Laboratorio Qualita. •PIONEERS OF EARTHQUAKE - PROOF •INTERIOR LABORATORY...
Open the catalog to page 6
BREVETTI DEPOSITATI UNIVESSITA DEGU STUDI 01 FIR Laurv* vpeclaMitlca In fci|*fnerfi Civile Anno i:udnibCD JOOE,- iH* COLLABORAZIONI UNIVERSITA PARTNERSHIP WITH UNIVERSITIES LABORATORY INTERNO INNER LABORATORY TEST CERTIFICAZIONE AMBIENTALE CERTIFICAZIONE RESPONSABILITA SOCIALE ENVIRONMENTAL CERTIFICATION SOCIAL RESPONSIBILITY CERTIFICATION
Open the catalog to page 7
MORE THAN 50% IN EXPORTS OLTRE 50 PAESI SERVITI MORE THAN 50 COUNTRIES SERVED APERTIA VISITE AZIENDALI OPEN FOR BUSINESS VISITS SOPRALLUOGHI PRESSO I CLIENTI SURVEYS AT CUSTOMERS' FACTORIES VERNICIATURA INTERNA INTERIOR PAINTING VERIFICA INTERNA INTERIOR TEST
Open the catalog to page 8
• OLTRE 50% DEL FATTURATO IN EXPORT • OLTRE 50 PAESISERVITINEL HONDO ROSSS realizza oltre il 50% del suo fatturato esportando la sua produzione in oltre 50 Paesi del mondo. ROSSS e sempre disponibile ad accogliere i propri clienti nei suoi stabilimenti per visite ai suoi impianti di produzione. • MORE THAN 50% OF EXPORT TURNOVER • MORE THAN 50 COUNTRIES SERVED IN THE WORLD • OPENNESS TOWARDS CUSTOMERS ROSSS gains more than 50% of its turnover exporting its production in more than 50 Countries in the world. ROSSS is always available to welcome its guests for visits to its systems. • TOTTO MADE...
Open the catalog to page 9
SAFAT - KUWAIT
Open the catalog to page 10
ROSSS ROSSS S.pA Viale Kennedy, 97 - 50038 Scarperia Firenze (Italia) ™delnltal* I _ ROSSS UNIMONDIAL PAG 9
Open the catalog to page 11
AL YOUSEFI SAFAT - KUWAIT ROSSS UNIMONDIAL
Open the catalog to page 12
ROSSS ROSSS S.p.A. Viale Kennedy, 97 - 50038 Scarperia Firenze (Italia) ™delnltal* I _ ROSSS UNIMONDIAL PAG 11
Open the catalog to page 13
AAFES GERMANIA ROSSS UNIMONDIAL
Open the catalog to page 14
ROSSS ROSSS S.p.A. Viale Kennedy, 97 - 50038 Scarperia Firenze (Italia)
Open the catalog to page 15
KHARAFI NATIONAL SAFAT - KUWAIT
Open the catalog to page 16
ROSSS ROSSS S.p.A. Viale Kennedy, 97 - 50038 Scarperia Firenze (Italia) ™delnltal* I _ ROSSS UNIMONDIAL PAG 15
Open the catalog to page 17
KHARAFI NATIONAL SAFAT - KUWAIT ROSSS UNIMONDIAL
Open the catalog to page 18
www.rosss.it ROSSS S.p.A. Viale Kennedy, 97 - 50038 Scarperia Firenze (Italia) Telefono +39 055 84001 Fax +39 055 8400300 e-mail [email protected] ROSSS UNIMONDIAL
Open the catalog to page 19
KHARAFI NATIONAL SAFAT - KUWAIT
Open the catalog to page 20
ROSSS ROSSS S.pA Viale Kennedy, 97 - 50038 Scarperia Firenze (Italia) ™delnltal* I _ ROSSS UNIMONDIAL PAG 19
Open the catalog to page 21
BIBUOTECA NAZIONALE CENTRALE Dl FIRENZE FORTE BELVEDERE - FIRENZE - ITALIA
Open the catalog to page 22
UNIVERSITÀ DI SIENA SIENA - ITALIA ROSSS UNIMONDIAL
Open the catalog to page 23
BIBLIOTECA COMUNALE DI PISA PISA - ITALIA ROSSS UNIMONDIAL
Open the catalog to page 24
ROSSS ROSSS S.pA Viale Kennedy, 97 - 50038 Scarperia Firenze (Italia)
Open the catalog to page 25
1. RIPIANI con tre ordini di piega su tutti i lati. Assenza assoluta di spigoli vivi o parti taglienti. SHELVES with a triple bend on all sides. Absence of sharp edges or sharp parts. 2. PIEDINO IN PLASTICA FIBRORINFORZATO resistentissimo alla pressione, stampato direttamente da ROSSS con materiale vergine, riumidificato, per conferire maggiore resistenza. Spessore del piedino di ben 5 mm. 4 PLASTIC FOOT REINFORCED WITH FIBER, high resistance to pressure, moulded directly by ROSSS with new material, remoistened, so to give greater strength. Thickness of the foot of 5 mm. 3. PIEDINO IN ACCIAIO...
Open the catalog to page 26
sicura la superficie esterna del montante. THE SLOTS of the upright offered by ROSSS are in a recessed surface (about 3 mm) in respect to the outer surface of the upright. This avoids the accidentally hooking to the slots during use. The outer surface of the upright results completely smooth and safe. 6. REGISTRO A SOFFITTO con fissag- gio garantito dal perno centrale registrabile, corredato di disco di contrasto in materiale plastico, stampato direttamente da ROSSS, riumidificato per conferire maggiore resistenza. CEILING REGISTER with anchoring ensured by the central adjustable pivot, completed...
Open the catalog to page 27
1. SPESSORE della lamiera dei ripiani di 0,75 mm, bordo del piano di 32 e 33 mm rispettivamente sul lato frontale e sul lato testata. 3 ordini di piega su tutti i lati, angoli uniti attraverso saldatura o stampaggio meccanico. THICKNESS of the sheet of the shelves of 0,75 mm, edge of the shelf of 32 and 33 mm respectively, on the front side and on the head side. 3 series of bends on all sides, corners joined by welding spot or mechanical pressing. 2. LARGHEZZA DEL MONTANTE 32 mm, tra le maggiori sul mercato; notevole profondità delle cavità sul montante che porta lo stesso ad uno sviluppo totale...
Open the catalog to page 28
1. SULLA SCAFFALATURA UNIMONDIAL è possibile montare senza alcun problema anche i ripiani zincati di Unimondial GALV. Questi ripiani, anche se hanno una portata leggermente minore rispetto a quelli di Unimondial, garantiscono una maggiore flessibilità di impiego: i rinforzi dei ripiani di Unimondial GALV, infatti, non sono saldati perché vengono montati semplicemente ad incastro. Il cliente, al variare delle proprie necessità di portata, può quindi aumentare o diminuire i rinforzi nei ripiani variandone la portata. La possibilità di smontaggio di tutte le componenti zincate del ripiano consente...
Open the catalog to page 29
4. PASSO IN ALTEZZA STANDARD di 50 mm e su richiesta, di 25 mm (per montanti di altezza massima di 3 metri). SLOT STANDARD PITCH 50 mm and on request, of 25 mm (for uprights of a maximum height of 3 meters). 5. RINFORZO del ripiano smontabile con sezione a ponte. Le ali sono leggermente stondate per conferire maggiore resistenza ed evitare graffiature del fondo del ripiano in fase di montaggio. REINFORCEMENT of the shelf removable with bridge 5 section. The wings are slightly rounded to give more resistance and avoid scratches of the bottom of the shelf during assembly. 6. I RINFORZI SMONTABILI...
Open the catalog to page 30All Rosss catalogs and technical brochures
IRON FIST24 Pages
TRAIN24 Pages
SEQUOIA16 Pages
UNIZINC20 Pages
UNIMONDIAL16 Pages
MECANO20 Pages
DUBLEZ1 Page
Pharmacy4 Pages
Magic4 Pages
Shop fitting72 Pages
Check-out counter system84 Pages
- Industrial shelving
- Commercial shelving
- Metal shelving
- Standard shelving
- Storage shelving
- Industrial mobile shelving
- Commercial mobile shelving
- Check-out
- Commercial check-out
- Metal mobile shelving
- Archival mobile shelving
- Supermarket check-out
- Cashier counter
- Commercial cashier counter
- Office mobile shelving
- Mechanical mobile shelving