IRON FIST
24Pages

IRON FIST.

+ STURDY STRUCTURE • Elimination of the welding between beam and connector: now a single piece. • Widening of the vertical section of the point of junction between beam and upright, thanks to flattening at that point, in order to increase the angle the thrust line and load-bearing axis. • Narrowing of the horizontal section of the beam at the point of junction with the upright. This allows to reduce the tendency of the beams to rotate to one side due to the concentration of the pressure on their internal sides, brought to bear by the weight of the pallets. • Double contact point of the beam...

+ COM PETITIVENESS • Elimination of welding thanks to the innovative press work production process. • Reduction of the height of the beams with unaltered load capacity and performance features. • Better exploitation of space during transport. The side frames can be broken down for shipping and the cross pieces and the braces assembled at destination. This permits increased economy of space and therefore of shipping costs with respect to the traditional system, which requires shipping the end frames with the cross pieces and the braces already assembled. • Reduction of the number of...

IRON FIST DIFFERENT COMPANIES, ONE SOLUTION COOP ITALIA, SESTO FIORENTINO, ITALY National central warehouse supplying the non-gro- cery sector. Earthquake-proof installation realized using IRON FIST® with a pallet holder and drive-in configuration for loading units of 500 Kg.

IRON FIST: DIFFERENT COMPANIES, ONE SOLUTION. CONAD, SAN SALVO CHIETI, ITALY Distribution centre. Installation for aseismic structure realized using IRON FIST.. TECHNICAL DATA PALLET PLACES: 50.000 (ABOUT 7.000 IN COLD ROOM) - PALLET PLACE CHARGE CAPACITY: Kg. 1.000 - FRAME HEIGHT: 9.000 mm - LEVELS NUMBER: 5 + GROUND - MEDIUM BAY LENGHT: 2.700 mm - PASSAGEWAY LENGHT: 230 m - ROWS NUMBER: 34 - CHARGE UNIT TYPOLOGY: EURO PALLET - EARTHQUAKE-PROOF INSTALLATION

IRON FIST: DIFFERENT COMPANIES, ONE SOLUTION. SNUVERINK & TWEPA, ENSCHEDE, HOLLAND Warehouse for storing corrugated cardboard boxes. Installation realized using IRON FIST®, series 90/150, for 4 loading units on Europallets of 450 kg.

IRON FIST DIFFERENT COMPANIES, ONE SOLUTION EUROSTORAGE, AMSTERDAM, HOLLAND Warehouse for storing records. Installation realized using IRON FIST®, series 90/200, with loading surfaces made of fire-resistant MDF and walking surfaces with open grating suitable for trolleys.

IRON FIST ACCESSORIES: DIFFERENT REQUIREMENTS, ONE SOLUTION. 1

1. Detail of protection tubes with plastic support* 2. Rollers detail 3. Shaped upright protection* 4. Frame protection* + upright protection 5. Shelves clasping with not-crushing profile 6. Shelf with open plank and tube protection 7. Back stop pallet 8. Detail rollers and open plank 9. Iron Fist installation with coils support * production upon request

IRON FIST ACCESSORIES: DIFFERENT REQUIREMENTS, ONE SOLUTION. 1

1. Floor anchorage for earthquake-proof cross bracing 2. Joint for sismic strengths conduction 3. Vertical dividers for long materials 5. Gravity movement installation for 6. Details gravity movement installation

IRON FIST: DIFFERENT COMPANIES, ONE SOLUTION. BONUS ENERGY, BRANDE, DENMARK Warehouse for the storage of mechanical, electrical and electronic components for the production of wind driven electric generators. Installation realized using IRON FIST®, series 90/150, for a loading unit

IRON FIST DIFFERENT COMPANIES, ONE SOLUTION UNICOOP FIRENZE, SCANDICCI, ITALY Inter-regional central warehouse for the distribution of food-non food. Earthquake-proof installation realized using IRON FIST®, series 130/250, for loading units

IRON FIST DIFFERENT COMPANIES, ONE SOLUTION C.M.C.P. NV, NAZARETH, BELGIUM Warehouse for the storage of flues and relevant com- ponents. Installation realized using IRON FIST®, series 70/150, for 4 loading units on Europallets of 150

IRON FIST: DIFFERENT COMPANIES, ONE SOLUTION. MAERSK LINE, ARHUS, DENMARK Central customs warehouse in the Arhus dock area. Installation realized using IRON FIST*, series

IRON FIST TECHNICAL DATA: ALL THE INFORMATION. Steels used UPRIGHTS The steel used for making the uprights is of a certified structural type, Fe E350 G, with a minimum unit yield strength of 350 N/mm2. The product is obtained from galvanized coils, using a pressing and cold roll forming process. CONNECTORS FOR WELDED BEAMS The steel used for making the connectors is of a certified structural type, S235JR ex Fe 360, with a minimum unit yield strength of 235 N/mm2. The product is obtained from coils with a pressing process. BEAMS The steel used for making the beams is of a certified...

Standardization of frames according to F.E.M. regulations. As established by F.E.M. regulation 10.3.01, it is recommended that the depth of the frames be chosen according to the size of the pallet or container to be stored. In order to comply with this regulation, we have introduced a new frame depth. DOES NOT COMPLY WITH F.E.M. REGULATIONS As established by F.E.M. regulation 10.3.01, it is recommended that the depth of the frames be chosen according to the size of the pallet or container to be stored. In order to comply with this regulation, we have introduced new beam lengths. COMPLIES...

QUALITY WAREHOUSE RESEARCH, PRODUCTION, DISTRIBUTION OF METAL STRUCTURES FOR THE MANAGEMENT OF INDUSTRIAL AND COMMERCIAL AREAS: COMPACTIBLES FOR ARCHIVES AND WAREHOUSES, IRON FIST PALLETS RACK nilRI F? AND DRIVE'INS' KOMPRESSOR, ROTARIES, UNIMONDIAL, UNIZINC, SEQUOIA UUBLEi CANTILEVER, MARKETS, SALES AND CASH COUNTERS, FALSE CEILINGS. ISO 9001 - IS014001 - EMAS - ACAICISI - SA 8000 - CERTIFICATED COMPANY