DUBLEZ
1Pages

No sharp corners so as to avoid any kind of accidents that may be caused by rubbing or sharping parts. carefully produced with closed profiles, in order to obtain a higher load avoiding sharping parts or dangerous edges. A square-head bolt 8.8 resi- stance has been purposely realized for DUBLEZ. It allows an easier assembly, there is no more need of using the false key. The square-head bolt section prevents the fixing operations from rotating. Dublez side supporting shelf has been purposely designed to receive supporting shelves in order to place the goods. The shelves can be of several types: metal(standard), perforated, wooden or others according to the needs. Availability of two different beams' typologies A special square washer permits an easier assembly and a more homogeneous distribution of the fixing pressure. A central stiffening rib on uprights to eliminate any potential local unstableness on the front side. WARNING: Each safety pins (code obtain a higher load capacity on each pair screws (code charges refer to each Lenght with pin kg with 1 screw kg with 2 screws kg Lenght with 1 screw kg with 2 screws kg FRAME MAX LOAD CAPACITY UP TO 8690 Kg DEPENDING ON CONFIGURATIONS. Viale Kennedy. 97 - 50038 Scarperia (Fl) Italia Tel. +39 055 84001 Fax +39 055 8400300 rosss@rosss Uprights perforation every 50 mm to assure a higher flexibility beams' joints facilitates the correct insertion of the safety pin both for beams assembled in pallets support position. The use of round-head fixing screws assure a higher safety. The supporting bracket for walkway platform has been realized in just one single piece without welding process to get a higher resistance and it is equipped of a special fixing device which is characterized by some longitudinal bars that go through the upright instead of the traditional frontal way of fixing. This system assures a higher resistance to the vertical charge in order to use the mezzanine floor in total security. capacity required. The beam of types of thickness so as to satisfy the several needs of charge up In order to assure a higher resistance to the load without sharping parts and dangerous corners the uprights' edges are inner folded with a "C" shaped closing. COMPANY CERTIFIED