Aluminium column SAL-R1 diameter Ø146mm at the base plate Anodising: 10 colours, each with possibility of chemical brightening Finish: grinded, anodisedaluminium, option of elastomer protection in the colour of the column up to the height of 350 mm (other height on customer’s request) Luminaire mounting: directly on the column, luminaires with mounting ø42mm mm with weight and surface parameters not exceeding the data from the strength table included in the technical data sheet Packing: sleeve material Levels of energy absorption according to EN 12767:2019: 50-NE-B-S-SE-MD-0, 70-NE-B-S-SE-MD-0, 100-NE-B-S-SE-MD-0 Wall thickness Approximate unit volume Concrete footing / reinforcement basket type Concrete footing / reinforcement basket code Acceptable windage of single luminaire [m 2 ] for Cx=1 Permissible weight of a single luminaire I zone, II Field category up to I & III zone, II Field category up to 450m by s.l II zone, II Field category up to III zone, II Field category up to 755m by s.l * Cradle to Cradle Certi ed® at Silver level applies only to products without the optional elastomer protection. Cradle to Cradle Certi ed® is a registered trademark of the Cradle to Cradle Products Innovation Institute. Zakład Produkcji Sprzętu Oświetleniowego „ROSA” Sp. z o.o. 1 Strefowa str., 43-109 Tychy, Poland, tel. 32 73 88 901 w