SAL-70/P
2Pages

Catalog excerpts

Aluminium column SAL-70/P diameter Ø146mm at the base plate Anodising: 10 colours, each with possibility of chemical brightening Finish: grinded, anodised aluminium, option of elastomer protection in the colour of the column up to the height of 350 mm (other height on customer’s request) Luminaire mounting: directly on the column, luminaires with mounting ø60 mm with weight and surface parameters not exceeding the data from the strength table included in the technical data sheet Extension arm type: According to resistance calculations Packing: sleeve material Concrete footing / unit volume reinforcement basket type reinforcement basket code Concrete footing / Resistance calculations for 30 kg - expected max loading on height 2 m during lowering and raising in angle around 45° Acceptable windage of single luminaire [m²] for Cx=1 I & III zone, II Field category up to 450m by s.l II zone, II Field category up to III zone, II Field category up to 755m by s.l Permissible weight I zone, II Field of a single luminaire category up to Zakład Produkcji Sprzętu Oświetleniowego „ROSA” Sp. z o.o. 1 Strefowa str., 43-109 Tychy, Poland, tel. 32 73 88 901 w

Open the catalog to page 1

Aluminium column SAL-70/P diameter Ø146mm at the base plate Column diagram of column SAL-70/P * Cradle to Cradle Certi ed® at Silver level applies only to products without the optional elastomer protection. Cradle to Cradle Certi ed® is a registered trademark of the Cradle to Cradle Products Innovation Institute. 2. Unscrewing the hinge’s bolt 3. Manually lowering the column Zakład Produkcji Sprzętu Oświetleniowego „ROSA” Sp. z o.o. 1 Strefowa str., 43-109 Tychy, Poland, tel. 32 73 88 901 ww

Open the catalog to page 2

SAL-70/P 2Pages

Catalog excerpts

All Rosa - ZPSO Stanislaw Rosa catalogs and technical brochures

SAL-70/P
2Pages